What All Vehicles Does the etrailer Trailer Hitch Receiver e98846 for a Nissan Rogue Fit

Question

Question:

Hello, can you please tell me if this tow hitch will fit on other vehicles besides my Rogue? Item # e98846.

asked by: Steve

0

Expert Reply:

The etrailer Trailer Hitch Receiver part # e98846 is a fit for the following vehicles:

2008 - 2020 Nissan Rogue
2010 - 2011 Nissan Rogue excluding Krom
2014 - 2015 Nissan Rogue Select

Please note, trailer hitches are vehicle specific so they only fit vehicles with the same chassis.

expert reply by: Conner L

0

Answer 1

I believe the part you are talking about is the weld nut on your 2014 Dodge Charger where the M12 bolt for the Draw-Tite Trailer Hitch #76145 installs. For this you need a12 mm x 1.25 tap and drill bit.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 8

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4 Prime, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and…

view full answer...

What All Vehicles Does the etrailer Trailer Hitch Receiver e98846 for a Nissan Rogue Fit

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching