Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # C11496
Retail:$265.95
Our Price: $174.15
You Save: $91.80
Confirmed to Fit
2010 Honda Accord
Coupe
Sedan
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (52)
- Q & A (0)
- Photos
2010 Honda Accord - Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- 1-1/4 Inch Hitch
- Class I
- 2000
- Visible Cross Tube
- CURT
- 200
- Custom Fit Hitch
Perfect for light-duty towing, this custom, Honda Accord trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Drawbar, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
11496 Curt Class 1 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
2,000 lbs.
Tongue Weight (TW):
200 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Gross Towing Weight (GTW):
2,000 lbs.
Tongue Weight (TW):
200 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Tech Tip
No drilling required for installation , Access holes may need to be enlarged by drilling, filing, or rotary tool , Exhaust must be temporarily lowered for installation , Heat shield must be modified or trimmed for hitch installation
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11496
Average Customer Rating: 4.7 out of 5 stars (52 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Kristopher11/23/2020
I am very pleased with the quality, fit and finish of the curt hitch. The purchasing experience with etrailer was phenomenal from detailed product information to order tracking and speed of delivery. A couple notes on the install. First I did have to bore out the access hole in the frame of my 2013 TL by just a little. In fact I’m not sure I enlarged the hole or if I just knocked off dirt and grime. My basic dremel tool is all I needed and it was not a big deal. 2nd the wire to fish the hardware through the frame was a little hard to see and my son had the brilliant idea to tie some floss to the end which made it easy to get the line pulled through the mount hole. Finally I pulled the rear wheels off. This is not necessary but made it easier to see and easier to get to the front side exhaust mounts. I’m not a car guy and generally choose to let someone else work on my cars but this was a fun job and only took a couple hour.
by: Antonio02/11/2023
Fits perfect for my 2009 Acura TL. I attach my bike rack to the hitch.
by: Mike05/13/2022
Part build is satisfactory, fitment is ideal.
Any modification needed was covered on website as well as installation material. My rear tow hook looked to be bent a little so direct fit was a little tricky due to my vehicles mating component condition. Didn’t take more than 6 beers and 2 hours. Works great for my bike rack. Anyone buying this for accessories will be pleased. Anyone buying to haul a trailer should not have an Accord
by: FRANKIE11/05/2023
Thank Lori B
Your service was excellent. Thank you helping me with for placing the order for me. I enjoying my new trail hitch.
by: David 01/17/2022
Easy ordering process, great shipping speed, and easy to install. It was really nice to have a video for my specific car and hitch directly on the etrailer site. Very professional organization!!
David C.
1/18/2023
Still awesome after a year of use. Works perfectly for my needs and it is as solid as the day I installed it.
by: Ben 05/31/2020
2009 HondaAccord
Bought this for a 2009 Honda Accord Coupe. It was a little more work than was originally planned for but it was fairly easy nonetheless.
I had to grind down the two plates that sit in the frame so that they would be thin enough to fit into the predrilled holes.
Also, as everyone else has mentioned, be prepared to mess with the heat shield over the exhaust. I found that it was easier to just completely remove the heat shield and figure out how much to cut by educated guesses which seemed to work out well.
Other than that, everything seemed to line up perfectly and I have had no issues at all so far! Shipping was quick and easy. I’m totally happy with my purchase and will buy from etrailer again for future needs.
Ben
6/2/2021
The product is great!
by: Horia06/14/2020
I installed this on my 2012 Acura TSX SE. This part did not fit my car properly possibly due to manufacturing defects. About 1/2 inch had to be cut away so the U-bolt aligned once the other two connection bolts were tied to the chassis. Once installed and all bolts tied to specifications, the hitch had a downward tilt which was very apparent once I connected my bike rack. The bike rack (Swagman XC2 - purchased at the same time from etariler.com) fit very loosely in this hitch, even though both the hitch and the rack have 1-1/4 connectors.
After connecting with etrailer.com customer service I was sent a replacement hitch, the Draw-Tite #24899, which fit perfectly and the bike rack fits snug and tight.
Courtney in customer service was very helpful and accommodating - this is what makes the difference in eCommerce!
Will do business again with etrailer.com!
by: Dan B.05/27/2015
2009 HondaAccord
After much research on the internet looking for a trailer hitch for my 2009 Honda Accord I finally desided to purchase from etrailer. It looked like they had the most complete choice of hitches at a reasonable price. They also had a very good video on how to install their hitch. I ordered their hitch based on the information provided. They stated that the height of the hitch, when installed, would be eleven and one half inches off the ground. All I had to do now was measure the height of my 4x8 utility trailer while level to determine the "rise" I needed. It turned out I needed a five inch rise. They had everything in stock so I ordered. The delivery was very fast, 3 days, even though I checked regular delivery. I backed the car up on car ramps to raise the back and proceeded to open up the larger of the three frame holes. It only took a little grinding. (make sure you have a small rotary file/grinder. I didn't and had to run to the store). The system they have for pulling the bolt plate and nut through the hole worked great. I removed the muffler and cut out a corner as directed in their instructions. The hardest part of the installation was getting the hitch up and in posistion to bolt up. I measured the difference between the hitch sitting under the car on the floor and the frame rails. Found I could use a five gallon bucket and a couple of shims. By pressing down on one of the shims it lifted one side onto the bolt and I started the nut. Once that was done it was easy to lift the othe side and place all the bolts on the hitch and torque down. I then proceeded to wire in the wiring harnes I also purchased from etrailer. This couldn't have been easier. Job done. Total time to install was one and one half hours. (remember I had to run to the store). The hitch looks like it came on the car. Now I can use my Honda to move my utility trailer with light loads. Before I had to use my one ton truck which uses alot more gas. Thanks etrailer for a great product. If needed, I will buy again from you.
by: Craig08/19/2018
2012 Acura TL
The product is great! I have purchased a few and have been very satisfied with Curt hitches (for my prior SUV's). Installation was another issue for my Acura! What a PITA! The video says they take off the mufflers for the video...BS! It was a pain to get the heat shield off, a pain to "dremel" the hole to fit the stock and bolt, and then there is no way to get the heat shields back on with the mufflers in place (IMHO)! So...the message here is to not take the installation lightly. Did I do it? Yes. Would I do it again, No! I would spend the extra $100-$200 and have someone else do it.
Again...just for my Acura. Installation for my prior SUV's was a piece of cake!
by: Chris 06/30/2022
Pontiac Trans Sport Van
Great quality, fitment, and easy install. Etrailer has been a great source for transport items, hitches, and racks. Thanks.
by: Ken Czaja10/22/2017
2009 HondaAccord
The hitch and wiring harness went on just as the video at your website showed. The only thing that would have made it perfect would be if the little flat piece of metal that the bolts went through had been made a tiny bit narrower so I wouldn't have had to grind them down. Otherwise it was a breeze compared to a hitch I installed on another car 13 years ago. Keep up the good work.
by: First Receiver12/27/2014
Video was very helpful. Lowering of exhaust and trimming of heat shields was easier than expected. The diagram from "CURT" shows the first hole in he frame to be used to attach the hitch. The hole in the frame closest to the bumper is actually the hole to be employed. The hitch did not fit easily against the frame and needed to be torqued into position (my wife says she has not taken the vehicle "off road" or torqued the frame.. Probably best to order the 4 way T connector for light hook up at the same time you order the hitch receiver.
by: Daniel05/03/2016
2013 Acura TSX
Quick delivery and great service from etrailer.com! I got it 2 days after ordering (super quick!!).
Hard to install the brackets (holes not large enough), so use a hammer to bang it through. Very easy to lose the wire for install and it takes a long time to retrieve, so be careful!! If you don't have help to install like me, use a floor jack (it was very helpful in lifting the heavy hitch).
by: Mark C.10/12/2016
Fast shipment with all necessary hardware for self installation- took about an hour to install myself with air tools and floor jack. Tows beautifully with light trailers- highly recommend.
by: Melissa B07/09/2014
2014 Acura TSX
This rack is as advertised, it fits perfect, and is straightforward to install (even for me). Installation directions were easy to follow, included all of the right information. However, it took a little longer than 45 minutes to put the hitch on the car. This is the perfect hitch for me (hauling bikes).
by: Eric N08/13/2017
2013 Acura TL
This will be my third purchase from etrailer.com of trailer hitches and every time I place the order, the service is fantastic. The instructions are very clear and I have received my product in amazing time. Basically, the day I placed the order, George responded to me that the order had been shipped. I am very satisfied with etrailer.com's products and customer service. Highly recommend.
by: Kurt07/29/2018
2010HondaAccord
I received this receiver about 5:00 PM only three days after ordering it. I called the customer and he delivered his car at 7:00 PM. I installed the the receiver, the taillight converter and wiring, called the customer back and He picked it up ready to tow his trailer by 8:15 PM. That is amazing. Flawless fit and function. That is how to satisfy a customer.
by: Kelly10/06/2018
This is a awesome hitch. It installed really easily, for me at least. It has some weight to it and feels like it is quite capable and up to the task it is designed for. The only challenge to the installation would be dealing with all the road grime on the undercarriage of my car. The product itself, is well made and the instructions are very good. I went online and reviewed the video clip on installation which really ties it all together.
by: Bill G06/10/2016
2010 Acura TSX
2010 Acura TSX. Very nice hitch. I did have to grind the holes in the frame slightly to get the backing blocks into the frame. Initially, I loosely bolted the the two "wings" to the frame and then went to put the U-bolt on the tow hook, and it wouldn't fit, not even close. So, I called etrailer.com and they had technician Tommy call me back. He suggested I loosely bolt the U-bolt to the tow hook first and ten bolt up to the frame. It worked a charm. Three cheers for etrailer.com and Tommy. Great customer service.
by: anatoly01/07/2021
by: Larry01/13/2019
2009 HondaAccord
We use the trailer hitch all the time and it has worked perfectly every time.
by: Rich T 05/19/2017
Jeep
the hitch was easy to install and works great. I use it to haul my bicycles around. a good investment and i no longer need to borrow my wife's Jeep to haul my bikes.
by: Don08/09/2014
Quick delivery, fast easy installation. The video was very helpful in cutting the heat shield.
by: Troy A07/17/2015
2012 Acura TL
Process was easy and quick. Only problem was part of the hitch was hanging outside the box when it was left at my door, maybe some better packaging.
25
51
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Availability of Trailer Hitch for 2009 Honda Accord to Allow Use of 2-inch Hitch Bike RackThe size and class of hitch available for your 2009 Honda Accord is a 1-1/4-inch Class I hitch such as Curt # C11085 or # C11496. No 2-inch hitches are made for your car because its frame is not strong enough for the weight ratings of a 2-inch Class III hitch. As you noted, there are adapters like the Brophy # HTAD and # HT5R that fit your 1-1/4-inch hitch and provide a 2-inch receiver opening for the 2-inch accessory. These are both about 7-inches long, a good bit shorter than the 12-inch...
view full answer... - Hitch Recommendation for a 2007 Honda AccordThe Curt Trailer Hitch part # C11496 that you referenced will not fit a 2007 Honda Accord. If it was a year newer it would as this hitch will fit 2008-2013 Accords. You would want a Draw-Tite part # 24787 for your Accord. I attached an install video for you to check out. To complete your towing setup you may also be interested in the following products. A ball mount. Trailer wiring part # 118302 and 1-7/8 inch hitch ball part # 19256.
view full answer... - Class I Hitch Compatibility with Cargo Carrier and Bike RackYou are correct that your 2016 Honda Accord Touring Sedan can be fitted only with a light-duty 1-1/4-inch Class I hitch, such as Curt # C11496 or Curt # C11681. Both hitches require the use of a support strap # 18050. Class I hitches have to be used with Class I accessories items, also the 1-1/4-inch size, to avoid having to use a hitch expander like # HT5R or # HTAD. Also, note that only 2 bikes can be carried on a Class I hitch even if the rack holds more than 2. The trouble with such...
view full answer... - Recommended Trailer Hitch and Bike Rack for 2014 Acura TLIf you are concerned about voiding the warranty of your 2014 Acura TL, I recommend checking the towing section in your owner's manual if you plan on installing a trailer hitch. Honda states the Acura TL was not designed for towing and doing so could void the warranty. That is something to keep in mind before installing a trailer hitch. For a trailer hitch, you have two options. I have attached a link to them for you to check out. The Curt Class I Trailer Hitch, # C11496, is the hitch I...
view full answer...
- Can You Lift A Vehicle Using The Rear Curt Hitch ReceiverI reached out to my contact at Curt Manufacturing and asked them if it would indeed be safe to use the hitch receiver as a mounting location for a floor jack and they stated that only on a Class III or above receiver would they recommend using the hitch receiver as a lift point. As each manufacturer may have different opinions on using their hitch as a mounting location for a floor jack, I would need to know the brand and Class of hitch receiver you have installed on your vehicle to ensure...
view full answer... - Why are Stabilization Straps Required for Non-Trailer Loads on Some Curt Trailer HitchesCurt requires that any of their hitches that are NOT rated for weight distribution use a stabilization strap # 18050 for non-trailer loads. This is to be in compliance with their warranty requirements. The strap reduces some of the stress on the hitch and where it is attached on the vehicle.
view full answer... - Recommended Receiver Hitch and 2 Bike Rack for 2010 Acura TLWith all three hitches offered for your Acura, the hitch will be visible below the rear fascia. This being said, the Curt Class I Receiver, part # C11496 features a round tube crossbar that many find more attractive than the square tube stock that the other two hitches use. We have several different bike racks with a two bike capacity that are compatible with a Class I receiver. The Swagman Trailhead, part # S63360 would be my recommendation. This is a great mid-priced rack that features...
view full answer... - Trailer Hitch and Wiring for a 2012 Acura TSX Special Edition SedanIn the answer you are referring to it states that Curt trailer hitch # C11085 fits the TSX Sport Wagon, not the sedan. It goes on to say that the correct hitch for the sedan is # C11496. This is all still true for your 2012. Since you have a 2012 sedan you will need hitch # C11496. There isn't any visible fascia that needs to be trimmed but underneath the vehicle there is a heat shield and trim panel that would have to be modified or trimmed for hitch installation. If you plan on towing...
view full answer... - Hitch Installation and Compatability On a 09 Honda Accord SedanThe Draw-Tite Class I Trailer Hitch, item # 24787, is not designed for use on the 2009 Honda Accord Sedan. This hitch is designed for Honda Accord Models 2003 - 2007. Installation of the Curt Class I Trailer Hitch, item # C11496, on the 2009 Honda Accord does not require drilling holes but may require trimming the heat shields (see instructions link). Some items you may need to complete your towing set-up are listed below. Drawbar # 3593 Hitch Ball # 19256 or # 19258 Pin and Clip...
view full answer... - Recommended Bike Carrier For 2015 Honda AccordWhen installing a bike rack on a vehicle there are a few things to consider. for the most part, platform-style bike racks like the Saris Freedom, part # SA4412B would provide a nice solid rack to carry your bikes. This bike rack weighs just 22-1/2 lbs so it is not a really heavy rack. I have attached a link to a video showing this bike rack on a Honda Accord you can check out. With the shank rise it does provide clearance for you, and when unloaded you can lower the center mast giving you...
view full answer... - Comparing Curt Trailer Hitch # C11085 and # 11496 for a 2008 Honda AccordThe differences between Curt Trailer Hitch # C11085 and # 11496 are so few, it really only comes down to aesthetics. Both hitches have the same capacity, they install the same way, and they both come with a ball mount, pin and clip. Besides price, the only differences is in the cross tubing. Trailer hitch # 11496 is at a direct angle while # C11085 is more of a gentle curve. A lot of people want as much of the hitch hidden as possible so I would go with # 11496. I have included a link to...
view full answer... - Will Trailer Hitch # C11496 Fit A Honda Accord Hybrid?I reached out to the manufacturer and confirmed the Curt Trailer Hitch Receiver item # C11496 is a fit for your 2014 Honda Accord Hybrid. This installation requires the underbody trim panel be removed or modified and the heat shield will also need trimmed. This hitch is perfect to let you carry a bike rack like # TH9056 or cargo carrier like # C18110 with your vehicle. Be advised that according to your owners manual, your vehicle is not designed to tow a trailer.
view full answer... - What is the Least Visible Hitch for a Honda 2010 Accord For Carrying a Hitch Mounted Bike RackIf your 2010 Honda Accord is the 2 or 4 door model, I believe the least visible hitch is going to be the Curt Class I Trailer Hitch, item # C11496. The reason that I say this is because the cross tube on this hitch is angled back under the vehicle slightly, rather than going straight across the rear of the vehicle. In terms of the receiver itself, all of the hitches will position the receiver just below the rear bumper in front of the tow hook in the center of the vehicle, which will cause...
view full answer... - Will RockyMounts MonoRail Work With Curt Trailer Hitch on a 2011 Honda AccordYes, the RockyMounts MonoRail Solo 1 Bike Platform Rack # RKY10007 will absolutely fit and have enough clearance to work on your 2011 Honda Accord with the Curt Trailer Hitch item # C11496. As you can see by the accompanying photo the bumper clearance on an '11 Accord with this hitch installed is 4-3/4" and the closest part of the MonoRail to the vehicle is 12" when the rack is folded down and 6-3/4" when folded up so you will be able to utilize all the features of this rack. The MonoRail...
view full answer...
- Trailer Hitch Recommendation for 2011 Honda Accord SedanThe hitch we have available for your Accord is a Class I hitch, Curt Class I hitch, part # C11496. If you'll be towing, you'll also need the # 118420 trailer wiring harness, a ball mount and a 1-7/8 inch trailer ball, part # 19256 or a 2 inch ball # 19258. None of the hitch manufacturers we do business with offer a 2 inch hitch for a Honda Accord. The portion of the vehicle that the hitch bolts to isn't capable of withstanding the type of capacities the Class III 2 inch receiver can...
view full answer... - How To Determine the Distance from Hitch Opening to Ground On Curt Hitch # C11496 2012 Acura TSXI spoke to my contact at Curt and he gave me a way for you to determine the distance the Curt Hitch part # C11496 would have from the top of the receiver opening to the ground. If you measure from the portion of your vehicle where the hitch attaches to 4.6 inches down thats where the top of the hitch opening will be. You will then need to measure from that point to the ground to determine where the hitch opening will be.
view full answer... - Using a Bike Rack with 2 Inch Shank In 1-1/4 Inch Trailer Hitch on a 2010 Acura TSXAll of the trailer hitches for your 2010 Acura TSX are Class I hitches with 1-1/4 inch receivers so in order to use an accessory, such as a bike rack, that has a 2 inch shank you would have to use an adapter, # HTAD. But the use of an adapter reduces the tongue weight capacity of the hitch by 50 percent. So for example if you used Curt hitch # C11496, which has a tongue weight capacity is 200 pounds. But when using the adapter the capacity will be reduced to 100 pounds. As long as the...
view full answer... - Is Trimming Required to Install a Trailer Hitch on a 2013 Honda Accord SedanWe do have several trailer hitches for the 2013 Honda Accord. I have provided a link to them for you. In the list that comes up you will see something called Installation Notes for each hitch. On all of the options we note that a heat shield must be modified or trimmed for hitch installation and that an underbody trim panel must be modified or trimmed if present. I have included a link to the instructions for Curt trailer hitch # C11496. You can see where the trimming is needed and that...
view full answer... - Trailer Hitch and Bike Rack Recommendations for a 2013 Acura TSX Sport WagonI do recommend a trailer hitch mount bike rack for your 2013 Acura TSX Sport Wagon. If you do not already have a trailer hitch, the most popular option is # C11496. I have included a link to a video showing a typical installation and a link to the instructions for you. For a Class I compatible bike rack that will tilt down and allow better access to the rear of the vehicle I recommend the Thule T2 Pro XTR # TH23JV. This is a platform style bike rack that fits 1-1/4 inch hitches (Class...
view full answer... - Recommended Trailer Hitch for 2016 Honda Accord to Use with Bike RackBoth the Curt Trailer Hitch # C11496 and Curt Class I # C11681 are confirmed to fit your 2016 Honda Accord. They will both use the same existing holes in the vehicle's frame for a no-drill installation and they also feature the same towing and tongue weight capacities. As you mentioned in your question, Curt does require that a stabilizing strap # 18050 be used with their hitch for non-trailer loads like bike racks or cargo carriers. This is a requirement that Curt puts on all of their...
view full answer... - 2013 Honda Accord Class 1 Hitch Using a Platform Style Bike Rack and A Stabilizing StrapI have confirmed that the Curt Hitch that you referenced # C11496 is a compatible fit for your 2013 Honda Accord Sedan. This is a Class I hitch and has a 1-1/4 inch hitch opening, and is rated up to 200 pounds of tongue weight. Please make sure that the weight of your existing platform bike rack, and the bikes loaded on it will work with this dimension and weight rating of this hitch. Also note that Class I hitch accessories only work with Class I hitches, and the manufacturers have designed...
view full answer... - Hitch and Towing Setup Recommendation for a 2015 Honda Accord CoupeThe Curt item # C11496 that you referenced does not include the recommended ball mount, part # 3593. With a Class I hitch like this you can only use the recommended ball mount for the hitch. For a hitch ball you would want the part # 19256 for a 1-7/8 inch ball or part # 19258 for a 2 inch hitch ball. If you have a coupe with LED taillights you would want the part # C56173 for trailer wiring or part # C56011 for with incandescent bulbs.
view full answer... - Trailer Hitch that Fits 2017 Honda Accord Hybrid to Carry E-Bike RackYes the Curt hitch part # C11496 does fit the hybrid models of your 2017 Honda Accord so it would be a great option to carry your e-bike and e-bike rack. To find a local installer the best option is to find a mechanic near you with a solid reputation and let them tackle the job. We don't have a list of local installers we can recommend at this time. For a bike rack the Thule EasyFold XT part # TH903202 would be a great option that is easy to load due to it's pull out ramp setup.
view full answer... - What Is The Height Of the Curt Receiver # C11496 From The Ground on a 2013 Honda Accord Sedan?The Curt Trailer Hitch Receiver # C11496 measured in at 10" to the top of the receiver from the ground when we installed it on a 2013 Honda Accord sedan at our shop. Be aware that this height can vary slightly as suspension systems do tend to sag over time. I have linked a video below that will help you see where this is measured from as well as what is involved for the installation. Also the hitch distance from the center of the pin hole to the rear of the bumper is 2". This will come...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Video Edited:
Joshua S
Video Edited:
Jacob T
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
Video by:
Jonathan Y
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kristopher
11/24/2021
After a year I am still very pleased with my purchase. The curt hitch will long outlast my car.