Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13707
Retail:$544.99
Our Price: $236.96
You Save: $308.03
Confirmed to Fit
2010 Ford Crown Victoria
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (270)
- Q & A (0)
- Photos
2010 Ford Crown Victoria - Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- 2 Inch Hitch
- Class III
- 4000
- Concealed Cross Tube
- 400
- CURT
- 6000 lbs WD GTW
- 600 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Ford Crown Victoria's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 4,000 lbs
- Maximum GTW when used with weight distribution: 6,000 lbs
- Maximum tongue weight: 400 lbs
- Maximum TW when used with weight distribution: 600 lbs
- Maximum gross trailer weight: 4,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13707 Curt Class 3 Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
400 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Gross Towing Weight (GTW):
4,000 lbs.
Tongue Weight (TW):
400 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Tech Tip
Drilling required for installation , Models with dual exhaust require relocation of exhaust pipe hanger to provide adequate clearance for exhaust pipe , An extra long drawbar is recommended
Complete Towing Package for 2010 Ford Crown Victoria
Retail:$730.70
Package Price:$358.90
2010 Ford Crown Victoria Owners Who Purchased This Trailer Hitch Also Bought...
Popular Crown Victoria Trailer Hitch Accessories
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
- Product did not meet expectations
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13707
Average Customer Rating: 4.8 out of 5 stars (270 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Jay07/27/2023
2007 Mercury Grand Marquis
Probably would have gave five stars but I was unaware that the actual hitch itself doesn't come with a ball attached to it. You have to buy the ball separately. I thought the ball came on a hitch or at least a standard ball came on a hitch. I guess I should have looked into it a little more. It's not a big deal but now I I have to chase down a ball. Other than that, installation was straightforward and the hitch and frame seem heavy duty. The wiring harness I ordered also seems pretty heavy duty and should prevent any shorts in the system
by: Anthony02/15/2024
Initial installation: Was simple and straightforward to install.
Maintenance: I spray the hitch receiver and the entire frame of the car, inside and out, with a blend of oil/wax/grease for corrosion protection in salty northern winters.
Four years later: No issues, holding up well.
by: 2002 Lincoln Town Car04/04/2017
2014 Lincoln Town Car
Yes! Town Car owners like to pull trailers with their Lincolns!
If I had to change one thing to make this into a 5-Star product, it would be the length of the "2-inch" receiver square tube. It needs to extend rear-ward by an additional 2 inches. I had to hunt for a ball mount hitch that was 2 inches longer to adequate give clearance from the rear bumper. The dual exhaust tailpipe hangars didn't need to be touched for the Town Car. Two photos attached - I hope this helps. The photo shows a ball mount with 2-3/4 inch rise to give bottom of coupler 14 inches over the ground.
by: Perry B.10/24/2018
1988 Ford LTD Crown Victoria
The quality of the hitch seems very good. The finish is thick and being in Canada with salt on the roads, it should stay rust free for awhile. Mounting the hitch on my 1988 Ford Crown Vic went well. There were no holes in the frame so I had to drill all 4 holes. At the holes near the end of the frame I could not use the supplied bolts due to the way the shocks on the bumper went inside the end of the frame. All in all it was an easy install with the car on a hoist and a helping hand from my brother.
Perry B.
10/27/2019
So far so good!
by: Chris R01/03/2016
2008 Honda Pilot
Installed on a 2008 Ford Police Interceptor. The end result was excellent. The hitch is hidden except for the square part in the middle that you would use for a hook up. I bought this trailer hitch not for towing, but to install a thing called a "superbumper" which absorbs impact from rear end collisions. My last vehicle was hit in the front and the rear by two separate drivers in the same week. I wanted to make sure I protected the rear of my police interceptor (I already installed a push bar on the front). To install the Curt trailer hitch, I used the help of a standard scissors jack (hitch is heavy). I put the scissors jack on the driver side and jacked up the left side of the hitch. Once that was jacked up I held up the right side of the hitch with my hands. Then I marked a hole with a pen. I put the hitch down and drilled the first hole. Once that was drilled I screwed the right side of the hitch to the frame. Now I drilled the second hole and screwed that in too. I then moved to the left side of the hitch (still held up by the scissors jack). I drilled two holes on this side. I ran into a little trouble with a bar that is above the frame, so I had to make the rear left hole a little bigger to fit the screw in aside of the bar. Last step was to put the screw in the last hole. The hitch was then perfectly lined up and installed. Here are four tips that will help with the install. Use a scissors jack instead of clamps (it allows you to line up the hitch perfectly onto the frame). Use a small pilot drill bit and gradually drill bigger holes until you drill a half inch hole (I used four drill bits per hole). Make your holes a little bigger than a half inch for ease getting the screws in (I pushed a smaller drill bit onto the sides of the holes to make more space). Wear nitrile gloves and safety goggles when installing (the metal shards from the frame a hot). I highly recommend this Curt Trailer Hitch.
by: Jack E Z07/29/2022
fit perfect simple install, well made. i have bought several items including tires for my 36’ 5th wheel travel trailer in 2012 been all over the USA coast to coast 2X north to south 3X and they still look good
by: Dan J06/20/2011
1989 FordCrown Victoria
Excellent - I was impressed with the quality, engineering and detail.
The package - CURT hitch, 4-pole hard-wire kit, 4-pole to 7-pole adapter, extended ball mount, ball & pin was installed on my prized 89 Ford LTD Crown Victoria.
I installed it by myself, without a helping hand, and once I got all the tools together it did take longer than the estimated 45 minutes - I would double that to 90 minutes.
Once I had the rear up on stands, I positioned the hitch under the frame by suspending one end with a hanger wire, then the other end. I snugged the hitch up to the frame with a floor jack and double checked the alignment. From there it was a breeze - Drilled the 4 holes, snaked the bolts into place, and torqued to specs.
Highly recommend CURT hitches & etrailer for all your trailer needs.
by: B J Martin07/26/2017
When I received the hitch and wiring kit there was a hole in the bottom of the box and half the staples were pulled loose. After opening the box the rest of the way the small box inside containing the wiring kit was open and the wire connectors and the bubble pack wiring kit were laying loose inside the larger carton. It will be installed on Friday and I hope that none of the pieces laying losses by the hole in the box fell out. See pictures. The first one I bought was excellent, I hope this one is as well!
by: Ken T12/01/2019
Hitch fit like a glove and I installed it in 30 minutes.
I installed this on a Limo to haul a small trailer to hold extra luggage.
I have also towed jet skis on Millionaire Monday with a group of guys to see how many looks we would get cruising down the highway. We had several cars passing us taking pictures.
by: Mark L.07/24/2016
2004 FordCrown Victoria
I installed this on my 2004 Ford Crown Victoria. It fit perfectly. It really was as easy to install as they said. I did it myself in my driveway and it took me about one hour using a floor jack to hold it up in place. The only problem I ran into was the holes nearest the bumper. There is a cylinder from the 5mph bumper that made getting the rear bolts in place kind of difficult. You have to wiggle them around to get them in place and I would recommend going up in size on the drill bit for all the holes.
by: Gary 10/31/2023
2011 FordCrown Victoria
The trailer hitch is a great product
by: John05/08/2021
Fast shipping and great product! Love these Curt hitches.
This was an upgrade from a class 1 to a class 3 hitch for my Crown Victoria.
The front holes lined up perfectly! Only had to drill out two more holes for the rear mounts. Didn't need any spacers. Hitch looks great!
by: Jerry R.02/16/2020
Hardest part of the install was trying to drill through the frame! Make sure you get the strongest drill bits you can. Hitch lasted longer than my transmission! Best you can get for these crown vics/panther bodies.
by: John R05/17/2015
2002 FordCrown Victoria
There was paint chipped off if the hitch just under the receiver hole about the size of a quarter. Not pleased with that. But other then that it got here just in time to install and I could pull a float in my hometown parade. It fit perfect on my 2002 ford crown Victoria (retired police interceptor. Thank you etrailer.com
by: Ken G09/14/2023
Install was easy once I figured out how to use the wire that comes with it to pull the bolts through the holes. The hitch itself is very nice no issues.
by: Markus09/21/2023
1997 Lincoln Town Car
worked out fine and easy
by: Michael04/30/2020
2007 Mercury Grand Marquis
Fast shipping and arrived in great shape.Installation was straight forward I would suggest you start out with a new good quality bit Thankfully only 4 holes to drill not bad!
by: RacerJames03/17/2017
2001 FordCrown Victoria
Arrived in a couple of days, install on my 01 P71 Crown vic was exactly as described on the very helpful videos. Looks and works great! Now I can haul the racecar to the track!
by: Gus08/21/2017
Chevrolet Colorado
The product is very good, it fits perfectly to my vehicle, is light and very easy to install.
I will use it with a tow bar to tow another vehicle from Aurora Colorado to Chihuahua, Mexico.
by: Rich T.09/14/2017
Crown
Great product had a great price. Installation on my Crown Vic was simple, had it installed in about a half hour. Will definitely buy from you guys again.
by: James m03/10/2016
2006 FordCrown Victoria
Good quality part.. Fairly easy in install. It took a bout 30 minutes once I got all the tools out
James M.
3/11/2017
Awesome!!
by: Joe C.09/17/2017
2010FordCrown Victoria
Hello,
I bought this class 3/4 hitch for my 2010 Crown Vic. It had some minor fit issues, but nothing that wasn't overcome fairly quickly. The only issue was with the nut plate that required getting creative at the bumper end to try and hold while torquing. The nut plate needs to be fitted a bit better so it does not spin in the tube. the front end was fine as the tube is narrower and the nut plate was held in place by the tube. The design required every shim to be used to level the hitch. Everything I needed was in the kit, which was good.
Joe
Joe C.
9/20/2018
The hitch has performed flawlessly. I would suggest two things. One, for this particular installation, a wider bolt pate would be useful to assist in tightening the rear bolts. I had to use a screwdriver to prevent the bolt plate from turning to tighten it. Second, You should add a warning to re-torque the bolts after using it the first time to ensure it is still tight. On mine, both rear bolts had seated with movement and, partially because that bolt plate mentioned earlier, it allowed it loosen slightly. That was with just 28 hours of hauling. For anyone that has done any installations, they know to re check, but thats not always true.
by: Crown vic guy07/09/2023
2010FordCrown Victoria
Mounted great. Rear bolts were a little tricky but receiver is solid.
by: RODNEYB11/28/2016
2005 Mercury Grand Marquis
EXCELLENT PRODUCT AND SERVICE. HITCH WAS DELIVERED EARLY ON THE DAY PROMISED.
by: Robert05/21/2017
1997 Mercury Grand Marquis
Wow! This company contacted me for a one year "check up" to see how my hitch was working. Well, I'm glad to report that my Curt , Class III is servicing me fine. Their installation tips made all the difference. I will recommend etrailer to others.
Robert
5/21/2018
Hitch is working fine. I passed on your company name to a few who asked about it.
25
312
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Replacement Hardware to Install the Curt Trailer Hitch Receiver 13707 on a 2007 Lincoln Town CarYes, the Curt Trailer Hitch Receiver # 13707 is a confirmed fit for both a 2003 Mercury Grand Marquis and a 2007 Lincoln Town Car. The replacement hardware can be found with part # RHK. You will simply click on the linked part and then select "Curt" as the manufacturer in the drop down menu. You will then type in "13707" for the hitch item number and we will send you the correct replacement hardware needed to install this hitch on your Lincoln. Keep in mind that a trailer hitch receiver...
view full answer... - Highest Capacity Trailer Hitch Recommendation for 1999 Lincoln Town CarFor your 1999 Lincoln Town Car the Curt Hitch part # 13707 is the highest rated hitch we offer for your vehicle. It has a tongue weight capacity of 400 lbs. Problem is your motorcycle weighs 400 lbs so there would be no capacity left over for the carrier. You would have to use this hitch with a small trailer to transport your motorcycle.
view full answer... - Parts Needed to Add Brakes to Aluma 6310H TrailerThank you for all of that info. Based on that you'd need a 3,500 lb trailer axle hub and drum with 5 on 4-1/2 inch wheel bolt pattern and matching brake assemblies. For that you'd want the # AKHD-545-35-K for the hub which comes with all bearings and is pre-greased and then for brake assemblies # AKEBRK-35-SA which are self-adjusting and you'd be set.
view full answer... - Do You have a Class III Hitch for a 2004 Mercury Grand MarquisClass III hitches have a higher capacity when compared to a Class I or II. Class I and II hitches are also 1-1/4 inch receiver openings, where as the Class III are 2 inch openings. We do have a Class III hitch available for a 2004 Grand Marquis, it is part # 41116. It can pull up to 3,500 pounds weight carrying, and if you add a weight distribution system, it can pull up to 6,000 pounds. The Class I is limited to 2,000 pounds. The Class II can pull up to 3,500 pounds too, but can only...
view full answer... - Will the Draw-Tite QSP Trailer Hitch Silencer and Cover Work on a 2" Curt Trailer Hitch Receiver I do have a hitch cover and anti-rattle sleeve option for you, however, the Draw-Tite QSP Trailer Hitch Silencer and Cover part # 63080 will not fit a 2" Curt trailer hitch receiver as the collar on the outside of the hitch receiver is too large. In order to cover the receiver opening on a 2" Curt trailer hitch receiver like part # 13707 I recommend using the Curt Rubber Tube Cover part # C22272. For anti-rattle purposes I recommend using the Brophy Stabilizer Bracket for 2" Hitch Receiver...
view full answer... - How to Determine Necessary Rise of a Ball Mount to Tow a Trailer LevelThere's no reason to guess at the rise you need to keep your trailer level. Instead you can take a couple of measurements. Park both the 2008 Ford Crown Victoria and the trailer on level ground, uncoupled. Then measure from the top of the inside of the trailer hitch's receiver tube to the ground. When we installed the Curt hitch you purchased, part # 13707 on a 2007 Police Interceptor it measured 13-1/4 inches. But you should measure yours in case it's different. Next measure from...
view full answer...
- How to Order Replacement Mounting Hardware for Curt Trailer Hitch 13707We do sell replacement hardware for our hitches. All you need is the part # RHK. On the product page you'd need to enter the part number of the hitch you have as well as the select the brand and you'd be good.
view full answer... - What Additional Steps Are Required For Installation Of The Curt Receiver # 13707 on Dual Exhaust?The Curt Trailer Hitch Receiver # 13707 only requires modification to the passenger side exhaust bracket on 2003 and later models with dual exhaust. You will not have to modify the exhaust on your 1997 Mercury Grand Marquis. If you had a 2003 or later model the passenger side exhaust hanger is removed before installing the receiver. Then it is reversed and attached with the additional 5/16" hardware included in the kit after the receiver has been installed. I do recommend installing...
view full answer... - Reinstalling Exhaust Hanger on Lincoln Town Car After Installation of Trailer HitchThere is a video of Curt Trailer Hitch # 13707 being installed on a Lincoln Town Car which I have linked for you; this is an install on a 2003 Town Car but the process will be the same as your 2010. As per the linked installation instructions, a portion of which I have cut out for you to look at, states you need to rotate the bumper hanger, reattach the hanger bracket and then attach the hanger assembly to the hitch mounting plate and exhaust. You will need to use washers to level the...
view full answer...
- How Much Does the Curt Trailer Hitch Receiver 13707 WeighThe Curt Trailer Hitch Receiver # 13707 weighs 38-lbs. This hitch comes with all of the installation hardware required. I've also linked a quick installation video of this hitch for you to have a look at.
view full answer... - Trailer Hitch Recommendation for 2015 Tiffin Allegro Bus MotorhomeWe don't offer a custom hitch for your Allegro bus motorhome, so you'd need to use a weld-on universal hitch. I'd recommend the Curt # C37CR if the frame members are between 18 and 44 inches apart. If the frame spread is larger, use # C97CR which fits frame spreads up to 62 inches. Both hitches have a 2-1/2 inch receiver.
view full answer... - Recommended Trailer Hitch For A 2009 Ford Crown VictoriaMy trailer hitch recommendation is the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2", part # 13707. It has a maximum tongue weight of 400 lbs and a maximum gross trailer weight of 4,000 lbs, which is greater than our other trailer hitch options for your 2009 Ford Crown Victoria. I have included a product description link and a video of this trailer hitch being installed on a 2007 Ford Crown Victoria below.
view full answer... - How to Carry 50 Pound Bike on 2004 Lincoln Town CarFor a 50 lb bike you will need a hitch bike rack on your 2004 Lincoln Town Car. For a hitch you can use the Curt # 13707. This is a Class III hitch with a 2" receiver and a bolt-on installation. For a bike rack, I recommend the RockyMounts MonoRail Solo Bike Rack # RKY10007. This is a platform style rack that uses a wheel mount and has a 60 lb capacity. The rack also comes with keyed-alike locks to keep your bike and rack secure. If you ever end up needing to carry an additional bike...
view full answer... - Recommended Trailer Hitch For Carrying Two Bikes With 2008 Lincoln Town CarI have a different option for you, but the Curt Bumper Mount Hitch # C19031 only fits trucks with a step bumper and as such will not fit your 2008 Lincoln Town Car. Instead you will need to go with the Curt # 13707 which is designed for your vehicle and will be perfect for carrying two bikes with a bike rack thanks to the 400lb tongue weight rating of this hitch. If you do not already have a bike rack I recommend going with the Yakima RidgeBack 2 Bike Rack # Y02457 which will fit this...
view full answer... - Trailer Hitch Receiver and Motorcycle Carrier for a 2003 Crown VictoriaOur most popular motorcycle carrier is the etrailer # e98873. It has a 39-3/8 inch ramp to make it easier to load the bike. The maximum weight capacity is 500 pounds. If your 2003 Crown Victoria doesn't already have a hitch you'll need Class III, 2 inch hitch receiver. I suggest the Curt # 13707 because it has a higher capacity than the Draw-Tite. You'll want to check your car's owner's manual for it's capacity because you'll be limited by the lowest rated component.
view full answer... - Can I Swap Hitches from Multiple Vehicles When I need to Tow with a Different VehiclePart # 75118 will only fit a 2001-2004 Ford Escape/Mazda Tribute. It is not swappable onto a 1990 Taurus or 1998 Grand Marquis. The best hitch we have for towing a boat with your 1998 Mercurcy Grand Marquis is a Class III hitch, part # 13707. The strongest hitch available for a 1990 Ford Taurus is a Class II. Our most popular Class II for your vehicle is part # C12232. Please note, Class I and II are 1-1/4 inch receiver openings.
view full answer... - Trailer Hitch and Wiring Recommendations for a 2003 Ford Crown Victoria with Dual ExhaustFor your 2003 Ford Crown Victoria I recommend the Curt hitch # 13707. This is a Class III hitch with a 2 inch receiver rated for 400 pounds tongue weight and 4,000 pounds gross trailer weight so it covers the capacity of the vehicle. Because your Crown Vic has dual exhaust there is some slight modification to the exhaust that will be needed to install this or any hitch for the vehicle. Its actually not all that difficult and I have included a link to a video showing an example installation...
view full answer... - Trailer Hitch and Brake Controller Plus Wiring Recommendation for 2009 Mercury Grand MarquisThe Curt hitch part # 13707 is a confirmed fit for your 2009 Mercury Grand Marquis so it would be a great place to start like you mentioned for towing with your vehicle. For wiring you will need to start with a 4-way (if you do not have one). For that you would want the # C59236. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation...
view full answer... - Hitch and Trailer Wiring Harness Recommended for 2010 Mercury Grand MarquisThe Wiring # C59496 would be a good choice for your 2010 Mercury Grand Marquis. For a hitch, I'd use the Curt Class III hitch, part # 13707 along with a # D-28 ball mount and # PC3 hitch pin. For a trailer ball, use # 19260 for a 1-7/8 inch ball or # 63845 for a 2 inch ball.
view full answer... - Do The Curt C12130 And 13707 Hitches Use The Same Mounting Holes For Installation?Hello Daniel. The Curt # C12130 hitch and the # 13707 do use the same bolt holes for installation. If you change out the hitch I do recommend you remove the old hardware and use the new hardware that comes with the new # 13707 hitch.
view full answer... - Moving Exhaust Hanger On 2002 Mercury Grand Marquis W/ Dual Exhaust To Install Curt Hitch 13707We have not had a chance to install the Curt Trailer Hitch # 13707 on a 2002 Mercury Grand Marquis with dual exhaust so I do not have a picture of video to show you, but it will be pretty straight forward and obvious how much and where to relocate the exhaust hanger while installing the hitch. There is not an exact measurement or place it needs to be moved to, just where ever clears the hitch. The mechanic you are taking the vehicle to for the install will be able to modify the hanger...
view full answer... - Trailer Hitch Recommendation for 2001 Ford Crown Victoria for Towing 2,600 lb Boat TrailerThere isn't a way we can recommend you reinforce a Class I hitch so that it's capacities increase. Only solution we have for your 2001 Ford Crown Victoria would be a higher capacity hitch. Ideally you'd go with a Class III like the Curt part # 13707 which has more than enough capacity, but a Class II like the Curt # C12130 also has enough capacity for your 2,600 lb boat as it has a 3,500 lb trailer capacity. For trailer wiring you'd then want the Hopkins kit part # HM11140504 which is...
view full answer... - Hitch Recommendation for 2008 Ford Crown Victoria for Carrying Motorcycle CarrierFor your 2008 Ford Crown Victoria the highest rated trailer hitch we offer is the Curt part # 13707 which has a tongue weight rating of 400 lbs. If your bike weighs 400 lbs then you'd be over capacity with the weight of it plus the carrier. The etrailer carrier part # e98873 has a 500 lb capacity and would work well in the Curt hitch mentioned. This carrier weighs 58 lbs.
view full answer... - Is There Drilling Involved to Install a Curt Trailer Hitch on a 2010 Lincoln Town CarTo install the Curt Hitch part # 13707 in your 2010 Lincoln Town Car you will need to do a little bit of drilling. You will need to drill 4 holes into the frame of the vehicle. Don't worry though, this is a pretty standard hitch install and it won't affect the strength of the frame. I attached an install video for this hitch for you to check out as well for further install info. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Rick A
Test Fit:
Randy B
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Mike H
Video Edited:
Chris R
Written by:
Lindsey S
Video by:
Kathleen M
Video by:
Alan C
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
2002 C.
4/4/2018
Its been fabulous! No regrets! Lincolns pull great!