Parts Needed to Add Brakes to Aluma 6310H Trailer
Question:
I have an Aluma 6310H trailer. I want to add electric brakes. Based on my vin they gave me the following measurements: Lippert axle, grease seal 122087, inner bearing L68149, Outer bearing L44649, Inner race L68111 Outer race L44610. Do you have brakes that will fit? Aluma 6310H electric brakes. Has 3500# rubber torsion axle. 2990# gvwr and ST205/75R14 wheels
asked by: Gary L
Expert Reply:
Thank you for all of that info. Based on that you'd need a 3,500 lb trailer axle hub and drum with 5 on 4-1/2 inch wheel bolt pattern and matching brake assemblies. For that you'd want the # AKHD-545-35-K for the hub which comes with all bearings and is pre-greased and then for brake assemblies # AKEBRK-35-SA which are self-adjusting and you'd be set.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 6000 lbs WD GTW
- 2 Inch Hitch
- 600 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Will B&W Continuum Weight Distribution System Work with Center Frame Piece on Trailer Tongue
- Q&A: How to Pick Out Trailer Brakes for a Aluma Trailer
- Shop: TruRyde Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Q&A: Parts Needed To Install Electric Over Hydraulic Disc Brakes On a 2021 Grand Design Imagine XLS 21BHE
- Shop: Curt Universal Wiring Kit for Trailer Brake Controllers - 10 Gauge Wires
- Shop: Removable Wheel for Trailer Valet JXS Trailer Jacks
- Shop: Dexter Electric Trailer Brakes - Parking Brake Ready - 10" - Left/Right Hand Assemblies - 3.5K
- Video: Trailer Valet JXS Trailer Jack with Footplate Review
- Q&A: A-Frame Toolbox for Aluma Trailer
- Q&A: Parts Needed to Add Electric Brakes to Aluma 7210H Trailer with 3,500 lb Axle
- Q&A: Parts Needed For Installing Electric Trailer Brakes On a Utility Trailer With Dexter 3,500LB Axle
- Shop: Trailer Wiring
- Search Results: 4 pin to 7 pin
- Search Results: 4 pin to 7 pin adapter
- Search Results: 7 way upgrade
- Video: TruRyde Electric Trailer Brake Kit Installation
- Video: Epicord 7 Way Molded Trailer Plug with Junction Box Revew
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: brake controller
- Video: Choosing the Right Trailer Wiring
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Search Results: trailer brake controller
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer brakes
- Video: etrailer Electric Trailer Brake Kit Installation