Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"
Item # C15703
Retail:$574.95
Our Price: $331.94
You Save: $243.01
Confirmed to Fit
2007 Chevrolet Silverado New Body
2500 - 6-1/2 Foot Bed
2500 - 8 Foot Bed
3500 - Pickup
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (226)
- Q & A (0)
- Photos
2007 Chevrolet Silverado New Body - Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2"
- 2-1/2 Inch Hitch
- Class V
- 18000
- Visible Cross Tube
- CURT
- 2700
- 18000 lbs WD GTW
- 2700 lbs WD TW
- Custom Fit Hitch
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your Chevrolet Silverado New Body's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2-1/2" x 2-1/2"
- Rating: Class V
- Maximum gross trailer weight: 18,000 lbs
- Maximum GTW when used with weight distribution: 18,000 lbs
- Maximum tongue weight: 2,700 lbs
- Maximum TW when used with weight distribution: 2,700 lbs
- Maximum gross trailer weight: 18,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
15703 Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty- 2-1/2"
Replaces 15702
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
18,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
18,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Gross Towing Weight (GTW):
18,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
18,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Tech Tip
Most vehicles do not require drilling, but there are some frames that will have to be drilled. Drilling required for installation , Hitch does not fit vehicles with a factory installed hitch
Complete Towing Package for 2007 Chevrolet Silverado New Body
Retail:$724.07
Package Price:$433.51
2007 Chevrolet Silverado New Body Owners Who Purchased This Trailer Hitch Also Bought...
Popular Silverado New Body Trailer Hitch Accessories
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" - C15703
Average Customer Rating: 4.8 out of 5 stars (226 Customer Reviews)
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Dustin 04/21/2024
Very happy with this hitch. Finish has held up well and is a very beefy addition to my 03'Duramax. Allows me to tow my heavy trailers without fear of breaking my factory hitch again (twice now).
Fairly easy to install as well.
by: Richard 03/15/2024
Dealing with etrailer was a breeze! Nice well built receiver hitch, heavy duty. Took less than half an hour to install including removing the old hitch. I will definitely recommend etrailer.com.
by: Brandon01/05/2019
2005 GMC Sierra
When I discovered that my factory installed hitch was only rated for 7500lbs I knew I needed something different. Etrailer came through again. This hitch is exactly what i needed. My camper has a GVW of 12K and i have the weight distribution hitch. Easy to install and the 4" drop just what i needed to lower my bumper also.
by: Jacob09/26/2023
The product itself is great.! Will likely order a second for my other truck. I’d give it a 5/5 stars, Worked phenomenal on a long trip! Easy to install by yourself. However it came damaged, box rubbed/ripped through and the powder coat rubbed off in multiple places and when I reached out to try and get a replacement got nothing so I went ahead and installed so I could make my trip.
by: Scott10/02/2022
I almost didn't buy it from the reviews saying it hangs lower than the oem one. I'm very happy I did, its a nice hitch. Yeah it hangs a little lower but it's negligible cant even tell. Buy it....
by: Josh04/13/2021
2005 Chevrolet Silverado
THE BEST SERVICE BY FAR!!!!!
I went through 3 different companies before contacting etrailer, they was very patient with me and went over everything to make sure the order was right.
I ordered it and asked for quick shipping, something almost no one offers on parts like this and BUT they have 4 DAY SHIPPING for only around $40, you can’t beat that!!! I ordered it Thursday, they said it will be here Thursday or Friday of the following week and it was here the following Tuesday!!!
Very quick and easy install.
I have 3 Curt Class V Hitches by the way.
one on the Chevrolet,Ford and Ram.
Thanks again for the Great service, y’all have a permanent customer.
AND THEY GIVE YOU STEP BY STEP DELIVERY PROGRESS!!!
by: Jason09/18/2019
The trailer hitch is a super heavy duty trailer hitch. The only problem with the trailer hitches is very heavy to install underneath of the truck. I have a truck with a 10 inch drop bumper they was after market and they research the trailer hitch and said it would fit and it fits great love the trailer hitch installation had all the right Hardware all grade 8 bolts nothing cheap about it love it
by: Anthony08/04/2022
Heavy Duty hitch and was easy to install. I really wish Curt would have extended the hitch further out as I can no longer carry my full size spare. I have 35" tall tires and I no longer have the room to carry the spare. The distance between the differential cover and hitch is shorter than the OEM hitch.
Anthony
8/5/2023
The hitch is well built and has served me well.
by: Chip11/06/2021
Product arrived in a damaged box and had some scratches in various places. Packaging could have probably been more robust.
Other than that, the installation was quick and straightforward. Unless you regularly bench about 100 pounds, you'll need some assistance. Have yet to tow with it, but it should work just fine. Much better than the stock hitch that failed which prompted the replacement. 03 GMC Sierra 3500 CC Long bed, Dually, 6.6L.
Jenny N.
11/8/2021
I will have our customer service team reach out to you. I recommend using a rust resistant paint to touch up the hitch. You will then have the paint on hand for regular hitch maintenance.
Helpful Links
by: Brian 04/29/2024
Was actually shocked at how heavy duty this thing is. Took under an hour to install.
by: Doug 04/11/2024
2006 GMC Sierra
Looks like a well built hitch,installing over the weekend.
by: AJ10/11/2023
It easily bolted on to my 08 Silverado 2500HD. The floor of the 2 1/2" receiver hole is about 1" lower than the hitch (I think stock) I took off, but I knew that from reading other reviews.
by: Andrew 02/22/2023
Still an excellent product and still highly recommend it!
Andrew
2/26/2024
Towed a lot with it and still working great, zero complaints.
by: Scott01/25/2018
Great hitch and perfect fit for my truck. Was really a 2 man job but got it done by myself. The factory hitch is kind of a pain to get off on the 2008 HD as there are bolts up right at the bumper line.
The new one fit like a glove i did add to shackles to allow my safety chains to attach a little easier. Great product great customer service. etrailer is the best i love these guys have bought lots of stuff from them and will definitely continue to buy more. Thanks
by: John k11/16/2022
2005 Chevrolet Silverado
Great affordable hitch. Very easy to install. I installed it in about 30 minutes even without removing the spare tire. 05 3500 Silverado
by: Alex 05/16/2024
Fast shipping and great selection. Will do all my business her from now on.
by: Nathaniel 09/13/2023
Great customer service. Product performs as should. Easy installation. Huge upgrade to the stock tow package, that had rusted through on my 08 silverado
by: Christian09/13/2021
2021 Forest River Cherokee Wolf Pack TT Toy Hauler
This hitch receiver is built very well and bolted right up to the frame. Should be able to tow my 38' toy hauler with no issues with this thing. Just wished they provided the most rearward bolts and nuts if you have an off road bumper that doesn't require the bottom rear bolts for a stock bumper. It's also pretty heavy, definitely a two man job. All in all, great receiver.
by: Josh H.12/28/2015
This is one duty receiver. One piece hitch with all hardware included. I installed in my driveway in 25minutes with only basic tools needed. Hangs about 4" lower than stock receiver but eliminated Need for drop hitch
by: Cade07/07/2023
First off I am becoming a huge fan of E-trailers! I destroyed the stock hitch on my 02 Silverado 2500HD and was stressed about getting another hitch and having to wait for shipping. Not that this will happen every time but it was on my door step 3 days earlier than expected. The hitch fit great and was easy to install. I didn't realize how light duty the stock hitch was until mine folded in half while towing my equipment trailer. This Curt hitch is a huge upgrade and gives me peace of mind now when hauling heavy loads. Couldn't be happier!!!
by: Ashton09/13/2023
Hitch receiver fit perfectly just as described, these folks give you step by step directions for start to finish install which expedite your entire process. Ordered Monday here on Wednesday! 11/10
by: Mike05/22/2020
Install went well very happy with product, electrical receptacle bracket needed a little modifyingBy pulling the bracket out word and changing the angle had to trim a little plastic off the bumper
by: Anthony10/01/2022
Best experience I’ve ever had ordering a product. So easy to see where your package is thru the whole process. Great staff
by: Brian 08/07/2023
2005 Ram 3500
Nice quality hitch easy install. Fast shipping. It sits a little lower then the factory hitch on a 2005 gmc 3500, so may want to double check if that may cause you an issue
by: Scott07/07/2021
Hitch arrived in a timely fashion with no shipping damage. Fit great on my hauler. Best shipping tracking that I have used! Will definitely recommend!
25
226
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Do You Carry The Replacement Hardware & Mounting Brackets For the Curt Trailer Hitch Receiver C15703While you are able to get the Replacement Hardware Kit # RHK to get new hardware for the Curt Trailer Hitch Receiver # C15703, this will not come with the brackets. You will need to contact Curt directly for the brackets.
view full answer... - Recommended 2-1/2 Inch Trailer Hitch for 2008 Chevy Silverado 2500 with Best Ground Clearance We haven't had the chance to install the Curt Class V Trailer Hitch Receiver # C15703 on the 2008 Chevy Silverado 2500 so I don't have exactly how far beneath the bumper the receiver will sit, however I did go out to our warehouse to take a measurement that will help you determine this. From the front bracket where the hitch will attach to the frame rails of your Silverado to the bottom of the receiver there is a distance of 9-3/4 inches. You can take this measurement down from the bottom...
view full answer...
- Replacement Taillights for Trailer Taillight SAE-P2-A-72For an exact replacement we have the part # MCL31RB for a red taillight and part # MCL31AB for an amber light. For just lenses you'd want the part # A31AB for an amber lens and part # A31RB for a red lens.
view full answer... - Heavy Duty Hitch for my 2003 Chevrolet 2500 HDAfter checking some information it appears that the maximum towing capacity of the 2003 Chevrolet 2500 HD is 12,000 lbs. This would be the max and depending on options it may be lower than that. I recommend using the owner's manual to determine exactly what the towing capacity of your exact configuration is. With that said the Curt Trailer Hitch Receiver part # C15703 is a very heavy duty hitch which will exceed your vehicle's capacity. The BulletProof Hitches Adjustable 2-Ball Mount for...
view full answer... - Curt Class V Trailer Hitch Recommendation for a 2005 GMC Sierra 2500 Long BedI checked with Curt and they list trailer hitch # C15312 as a fit for a 2005 GMC Sierra 2500 or 3500, 8 foot bed with factory cutout bumper only. If your truck does not have the factory cutout bumper then I recommend # C15703 (2-1/2 inch receiver opening). If the truck has the 10 inch deep drop cowboy bumper then I recommend # C15313.
view full answer... - Using an In-Bed Camper while Towing an Enclosed Trailer with a Chevy Silverado 3500For your 2001 Chevy Silverado 3500, I highly recommend Torklift # TLC1205-30. The SuperHitch Magnum has more than enough weight capacity to tow your trailer with a hitch extension. For your hitch extension TorkLift # TLE1524 is the most solid option to carry your enclosed trailer. The SuperTruss needs to be used with # TLWD1000, which is a weight distribution system. Your trailer is too heavy for the the Curt hitch # C15703 paired with a normal hitch extension like # C45048 because you...
view full answer... - Hitch for 2007 Chevrolet Classic Silverado 3500For a 2007 Chevrolet Silverado CLASSIC, there is a "Select Vehicle Style" drop-down menu where you can select "3500 - Pickup" or "3500 Pickup w/ 10" DeepDrop bumper" If you have the DeepDrop bumper then you can use the B&W # BWHDRH25187 hitch with 2" receiver opening, and a tow rating of 16,000 pounds. If you need a wiring harness, and your truck has been pre-wired at the factory, you can use the Tekonsha # 118384 wiring adapter for 4-pole connector. If you have the standard bumper then...
view full answer... - Distance from Mounting Flanges to Crosstube of Curt Hitch # C15703It is, I went and measured the distance from the mounting flanges of a Curt Hitch part # C15703 to the cross tube that we have in stock and found that it measures right at 6 inches. I attached an install video for you to check out as well.
view full answer...
- Best Trailer Hitch for a 2008 GMC Sierra 2500The best trailer hitch for your 2008 GMC Sierra 2500 will vary depending on what you're going to use it for and possibly whether you have an 8 ft. or 6-1/2 ft. bed. If you need to haul a lot of weight I would suggest the Curt Class V CD 2-1/2" # C15703. This will get the most out of your truck for your dollar and will work with either length of truck beds. The Curt Class III # 13208 will also work with both bed lengths and would be more appropriate if you're not hauling as much weight. I...
view full answer... - Will Draw-Tite Class V Hitch 41944 Bolt Up to Bumper Bracket Like Factory HitchWe offer Class V hitches in both 2-inch and 2-1/2-inch sizes for your 2009 Chevrolet Silverado 2500. All are shown on the linked page. Draw-Tite's 2-inch hitch # 41944 is a no-drill install since it bolts up to the bumper bracket the same way as the factory hitch. Written instructions and a helpful video are linked for you.
view full answer... - Will Installing Curt # C15703 on 2006 Silverado 2500HD Interfere with Larger than Stock Spare TireCurt does not have that measurement available, but you can determine this for yourself by taking some measurements from the underside of your truck. Using the diagram I edited for you, locate the weldnut that would serve as the rear-most attachment point for the hitch. From the center of this bolt hole, measure rearward toward the bumper six inches. From that point, measure forward to the closest point of the differential. If this distance is greater than the diameter of your spare tire,...
view full answer...
- Hight Capacity Trailer Hitch for 2003 GMC Sierra 2500HD without Rear BumperSince the hitches we offer for your 2003 GMC Sierra 2500HD attach to the frame and not the bumper they will all still fit and work great. The Curt Class V hitch # C15703 would be an excellent option as it has plenty of weight capacity as it's rated for up to 18,000 lb trailer weight.
view full answer... - Dimensions Of Curt Trailer Hitch Receiver C15703I had our warehouse measure the Curt Trailer Hitch Receiver # C15703 you were looking at, and has an overall width of 40-5/8", overall length of 29". The distance between the vertical mounting holes is 14-1/2" center to center, and the horizontal mountings holes are 39" apart center to center as shown in the included diagram. The Curt # C15703 is a confirmed fit for the 2001-2010 Chevrolet and GMC 2500/3500 Trucks. If you can tell me what Year/Make/Model your truck is I would be happy...
view full answer...
- Recommended Heavy Duty Hitch for a 2006 GMC Sierra Short BedThe Draw-Tite # DT45519 is designed to be used on the 8 foot bed models of the GMC Sierra and will not fit the short bed models. That being said, we do have Class V hitches with a 2 1/2 inch receiver options available for your short bed truck. The Draw-Tite # DT45517 is designed for short bed trucks and has a 13,000 pound towing capacity and 1,300 pound tongue weight capacity. This is upped to 17,000 pounds and 1,700 pounds, respectively, when a weight distribution system is used. The...
view full answer... - Drop of Curt Class V Trailer Hitch # C15703 for 2007 Chevy Silverado Classic 3500From the underside of the frame to the top of the crossbar tube would be 5.13 inches, and from the underside of the truck frame to the lowest point on the hitch, which is the bottom of the side plates, is 9.83 inches. You can see these dimensions on the photo I've edited for you. I've also linked to an install video for you.
view full answer...
- Curt Trailer Hitch and TorkLift Camper Tie-Downs for 2006 Chevy Silverado 2500HDThe Curt Trailer Hitch Receiver # C15703 that fits a 2006 Chevy Silverado 2500 will work with TorkLift camper tie-downs. These tie-downs are specific to a number of variables which you left out but assuming your '06 Silverado 2500 has an 8 foot bed and does not have any running boards you will need TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2204 and the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLR3501. If your truck has different specs please let me know....
view full answer... - Is There a Curt 2-1/2 Inch Trailer Hitch that Fits a 2006 Chevy Silverado 2500HD 6-1/2 Foot BedWe do have a trailer hitch to fit your 2006 Cheverlot Silverado 2500HD but the Curt # C15800 is not a fit. It fits larger cab & chassis models. Instead hitch # C15703 is a 2-1/2 inch reveiver that fits. I've linked a video from when we installed it on a 2003 Silverado for you. If you also need trailer wiring I recommend # 30955 for your truck.
view full answer... - Exact Measurement of Receiver of Curt Trailer Hitch 15703I went out to the warehouse with digital calipers to get the exact measurement of the receiver of the Curt Trailer Hitch # C15703 and found it to be 2.55" though it is possible for the hitch that is shipped to you to have slightly (and by slightly I mean a couple hundredths or thousandths of an inch) more or less room in the receiver. There is always going to be some slight play but you can reduce this with the use of the Blue Ox Hitch Receiver Immobilizer II # BX88225 which is designed...
view full answer... - Hitch Recommendation for a 2007 Chevy Silverado 2500HD with 2-1/2 inch Hitch OpeningFor your 2007 Chevy Silverado 2500HD you would want the Curt hitch part # C15703 as it has been confirmed to fit your vehicle and has a 2-1/2 inch hitch opening like you said you were interested in. I attached a install video plus a link to a page that has all of the ball mounts we carry that would fit the hitch. You would want to first determine the amount of rise/drop you would need to tow your trailer level and then select it from the filters on the link.
view full answer... - Recommended Class V Hitch for a 2002 Chevy Silverado 2500 HD w/ a 6 Foot Bed The best class V hitch for your 2002 Silverado 2500 is going to be the Curt Trailer Hitch item # C15703. This hitch is custom fit for the 2500 HD's with the 6-1/2' beds and bolts to your truck with included hardware. This hitch has a 2-1/2" receiver and is made in the USA. It has a 18,000 lbs towing capacity and a 2,700 lbs maximum tongue weight. This hitch can be used with weight distribution systems but they will not increase its capacity. I have linked an installation video below....
view full answer... - Distance Between Mounting Holes of Draw-Tite Hitch DT45519By mounting hole dimensions I assume you are asking about the distance between them, and that distance is 39 inches for the Draw-Tite Trailer Hitch Receiver # DT45519. That is the same distance between the mounting holes as the similar hitch from Curt which also has a 2-1/2 inch receiver and fits a 2007 Chevy, the Curt Trailer Hitch Receiver # C15703. I have added links below to the installation instructions of both hitches for you to check out.
view full answer... - Replacement Hardware Kit for Curt Hitch C15703We sell replacement hardware kits for all of the hitches we offer including the Curt # C15703 that you referenced with the part # RHK.
view full answer... - 24 inch Hitch Extender that Could be Used with 2006 Chevy Silverado 2500HDIf you have a 2-1/2 inch hitch installed on your 2006 Chevy Silverado 2500HD you could use the Reese hitch extender part # RP45292 which can be trimmed down to 24 inches. If you need a 2-1/2 inch hitch the Curt Class V part # C15703 would work great.
view full answer... - Recommendation for Upgrading to 18K Trailer Hitch on 2006 Chevy Silverado Going to an 18,000 pound rated trailer hitch on your 2006 Chevy Silverado 3500 will indeed require you to switch to a 2-1/2 inch receiver. This is not a problem though because as you mentioned we have various adapters available such as the Curt # C45405 that will reduce this opening to 2 inches so you can continue to use your existing accessories. Because the sleeve slides into the hitch receiver it won't restrict the use of your accessories at all in terms of capacity or function and it...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Joshua S
Written by:
Lindsey S
Video Edited:
Andrew L
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jason L.
9/19/2020
Been using for a year the hitch is great.the paint is still in gear condition no peeling,or rusting.the hitch has handled everything I have hooked to it .