To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.8 out of 5 stars (56 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.Perfect fit and relatively easy to install. It's estimated to be about an hour.
A lift, installed this one before, a helping hand, all your tools at the ready and don't plan to put them away when finished, no interest in cleaning while you're there and do your trimming of the mat and heatshield per the suggested measurements...then it may take about an hour. However, if you're like me, methodical, tidy and OCD won't allow for trimming that looks like a hackjob when you're finished, then plan on 3, hope for 2 and probably land somewhere around 2-1/2 hours from beginning until shower time.
I've posted some pics with some measurements for the mat where the hitch protrudes, and simply trim the flange off the heat shield, so you can avoid the hackjob look. You will end up with 1 original nut left over. Also, the install video doesn't touch on the passenger side, which is where it gets interesting. However, the install video for the 2021 Pacifica uses the same hitch and offers a little extra for the passenger side.
Hope this helps!
My Curt trailer hitch went on nice and easy. No filing or drilling was necessary. The install took 1 1/2 hrs to complete. I only needed to remove a small amount of the undercarriage fabric panel to complete the installation. The directions show a much larger but unnecessary fabric removal area. This is easy to see and navigate through. The heat shield also needed less removal than shown. This is easy to see once you’re up in there working. I also was able to perform the installation without raising the vehicle. A couple fabric screws in the drivers side rear wheel well are easier to remove with the wheel removed, otherwise a pretty straightforward install. Note that the Curt hitch is rated for 400 lbs tongue weight but the Pacifica is rated for only 350 lbs tongue weight. Oh, and you will need a helping hand for about 10 minutes in order to lift the hitch in to place. Tell the wife to stop complaining and the sooner we get this hitch in place the sooner she can go shopping.
Relatively easy installation and the fitment on the vehicle looks great. The finish looks good, hopefully it will last and won't have the typical rust look in a few years.
Seriously great model and product. Looks OEM and installation 1-1 1/2 hrs with breaks in between.
Build quality is outstanding. Direction and install videos are a great help. BUT. My 2022 Pacifica has a bit different deflector pan. The heat shield is rivetted to the deflector. All came out in one piece, which is not a problem, just different from the videos.
The real problem came when trying to pull the bolt/washer combo thru the frame rails. There seemed to be extra "stuff" hidden in the rails, blocking the washer from passing thru. We wound up pushing the short washers up thru the square hole near the rear of the car, and holding them over the appropriate hole with a magnet, then fishing the wire and bolt thru and into position. The front bolt and washer went in fine. In the photo, you can see how little was trimmed out to clear the receiver. About 4" wide, and about 10" long.
All in all, I've gotta say the fish wires are a great idea.
I think you made need an update video to cover these couple of items.
Other than that, Nice Job!
Hitch met all expectations. Installation was smooth with van on a lift, instructions were perfect. Used receiver as anchor point for canoe on a cross country trip into the Rocky Mountains. Later used for the bike rack. Works as advertised.
Hitch looks and fits great. Tucks out of the way. Using to haul Ebikes. Very disappointed with the video where it tells you to cut the bottom cover 7” x 32””. You only need to trim about 8”wide. Even though it’s underneath it looks like a hack job and you did away with several fasteners.
Hitch was quickly delivered in great shape. Installation was made easier after watching the install video on your website. Hides completely behind the bumper. Very happy customer!
Directions were clear. Tried installing it myself but definitely needed a second set of hands to hold it while threading on the bolts. Tucks up to the bumper nicely. Using it for a mountain bike rack.
Haven't used it yet, but hitch for my 2021 Pacifica installed as advertised. It arrived when it was supposed to, with all necessary hardware. Spoke with a very helpful Davine W. at etrailer.com, when inquiring about a delivery date, only to later notice that a George J at etrailer.com had already emailed me the info. Very pleased with product and customer service.
I purchased the trailer hitch from etrailer and they installed it for me. I am completely satisfied with both the hitch and the installation quality. When ever I need anything for my vehicle I always check in with etrailer FIRST. They're unbeatable.
The install was painless and the video is all you need in order to install as it's very clear and direct. The only suggestion I have is in reference to the removal of the inner wheel well screws. They are very hard to get at with a standard ratchet if installing without a lift. I suggest purchasing a small 1/4 inch ratchet set prior to install as you then can get in there much easier and save yourself the headache of that step.
willbe getting it installed looks great
Hitch came to me bent called customer support and they had me a new hitch on the way same day. Great customer support. Fast shipping.
was not built right, the receiver was ~ 2" off center. had to go thru curt trailer hitch to get a replacement sent out
Very impressed with the hitch kit bolt fishing tools are the best thanks
Easy to install with a little help from my friends and a LIFT!
Easy to install if you have the tools. Well concealed.
Fit like a glove.
Great fit easy install. Would definitely purchase and recommend to others.
This hitch nests nicely under the back bumper of my 2020 Pacifica. The etrailer installation video was very helpful and made installation much easier than it would have been with the instructions alone. The video tip that the underbody cover didn't need to be cut back very far made for a cleaner install. I'm happy I went with this option because it looks nice.
Hitch was off center after proper installation. Terrible quality control. Huge waste of time and labor. Would not purchase again.
A very strong and well built hitch for my 2022 Pacifica. Some of the paint was chipped off where it bolts onto the frame. Otherwise, very happy with the purchase.
very good instructions in fact shocked to see how easy the install went, very pleased with your product provided the pull wires for the bolts. also really like the tilt feature with the bikes on the rack to access my van from the back
AS ALWAYS I GET GREAT SERVICE AND RAPID SHIPPING.
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Robert
8/31/2023
This one is the latest of several Ive ordered over the years, for multiple vehicles. eTrailer is my Go-To place for a hitch. I cant seem to find a gently used vehicle I like, that already has a hitch installed. So Ill be back.