Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
(26 reviews)
Price: $351.52
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
Item # C14357
Retail:$588.95
Our Price: $351.52
You Save: $237.43
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (26)
- Q & A (0)
- Photos
CURT Trailer Hitch - C14357
- Class IV
- 2 Inch Hitch
- 10000 lbs GTW
- Visible Cross Tube
- CURT
- 1000 lbs TW
- 12000 lbs WD GTW
- 1200 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class IV
- Maximum gross trailer weight: 10,000 lbs
- Maximum GTW when used with weight distribution: 12,000 lbs
- Maximum tongue weight: 1,000 lbs
- Maximum TW when used with weight distribution: 1,200 lbs
- Maximum gross trailer weight: 10,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
14357 Curt Class 4 Trailer Hitch Receiver
Replaces 14044
Installation Details
This Product Fits The Following Vehicles
- 2004 - 2005 Ford F-150
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
- etrailer mistake
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" - C14357
Average Customer Rating: 4.7 out of 5 stars (26 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Scott D.08/20/2022
2005 Ford F-150
Mine arrived with no hardware kit or instructions. I called etrailer and they sent the hardware kit asap. This Curt class IV trailer hitch worked great for our 2005 ford f150 flareside. It recommends to remove the rear exhaust hanger for easier installation. This was unnecessary for our truck. I would recommend removing the spare tire. The access hole to route the wire is on the outside of the frame above the leaf spring NOT the inside. It was a very simple install. I would reccomend this this hitch and Etrailer to anyone.
by: James S12/09/2023
2004 Ford F-150
Best trailer parts company by far. This is my second order and received my hitch receiver in two days, three days sooner than it was supposed to be delivered. Thank you very much.
by: George08/16/2018
2005 Ford F-150
I would have given 5 stars but my receiver was delivered without a box and missing the hardware. It had a piece of box with the shipping label wrapped around it with plastic wrap. The receiver was beat up and scratched in several places. I paid extra for the delivery only to find out it was incomplete when delivered. I called and was sent another set of hardware but I had to wait several days before receiving it.
This receiver fit perfectly. Installed it by myself but it took longer than I expected. When fishing bolts through I would suggest doing the ones further from the access hole first. The wire would get caught up and I had to keep cutting pieces off before starting the next bolt. I would recommend picking it up all at once as level as possible. I loosened the exhaust pipe but I don’t think it needed to be done. This piece is one solid heavy piece. Looks good on the truck. I don’t have all the proper tools and decided to go with this model instead of the others where you would have to drill holes in the frame. There is no drilling required with this one. I love the way it looks on the truck. The bolts are big and heavy. Not cheap in any way.
by: Dalton S03/23/2019
2005 Ford F-150
Installed super easy, all I did was bolted on the chain holes first and that held the hitch onto the truck and then I just swung the hitch up and held it up with a jack and a block.
by: James 06/03/2020
The hitch is really solid. I am pleased with the construction. I struggled with installation. Looking back, a second person would have made it much easier. 3 out of four holes aligned well. The fourth one had to be drilled a bit. Overall, I think it’s a great product that will allow me to pull a trailer to haul materials for home/yard projects. Thanks, J.R.
by: Jason07/24/2022
Received a hitch that was only wrapped in cheap plastic, no box. Hitch waa scratched up and did not come with any mounting hardware. Waste of my time and money.
Jenny N.
7/29/2022
I am very sorry to hear that the hitch arrived without hardware and with scratches. This is certainly not who we want the hitches to arrive. I will have our customer service team reach out.
by: Todd 05/26/2020
2005 Ford F-150
I was surprised how quickly the hitch was delivered, the price, service and quality of the Receiver Hitch is outstanding. Thank you
Todd
6/6/2021
Very pleased with my purchase, installed without any problems. Ive been towing around a 18 foot trailer, not once have I worried about the tow.
by: Aaron06/13/2023
Fitment was spot on. Have pulled my TT many times and no issues.
by: Vincent 08/09/2018
Very nice hitch .
Well constructed.
Easy installation.
Only dislike as with other common hitches is the area were the chains attach. Once locking pin is installed,trying to fit size 3 and 4 hooks is a challenge.
A little more room would be nice or different angle for hooks to attach.
by: David02/02/2019
2004 Ford F-150
The hitch itself is awesome. I took my 04 f150 to a garage to have it installed. They said that if they did the bumper would have to be removed as it would not fit with the new hitch in place. The project is currently on hold.
by: Carl 05/18/2020
The trailer hitch was good it was a little banged up because of shipping maybe you can package the hitch inside the box with more phone so it doesn't bounce around other than that went on the truck perfect
by: William 01/05/2022
Ford F-150
2004 Ford exdcab Lariat F-150 4X4 After some modifications to factory old hitch & bumper. This hitch fit perfectly & bumper is on truck. Can’t tell from new factory one.
by: Reinaldo R09/03/2020
2004 Ford F-150
This is a solid, well made hitch, I love it. The only reason for 4 stars instead of 5 is because it was shipped in a box with no support, box was totally destroyed during shipping as the hitch was just moving freely inside and half the screws were missing.
by: Andy McC08/05/2017
2004 Ford F-150
I installed it in about 45 min. everything fit as it was supposed to. The wiring is true plug and play and everything worked the first time as it should. The trailer brake made it possible to pull a 9400 lb. loader with this truck.
by: Mel08/20/2016
2005 Ford F-150
Fits my 2005 Ford F-150 perfect. Doesn't hang low. Not past bumper. No need to drop exhaust pipe. But do drop the spare tire. No drilling. A little patience and your done. Very strong high tow weight rating.
by: Warren 05/31/2020
2005 Ford F-150
On time delivery and received all items as advertised. Only wish it came with two spring fish wires as the one that came with it broke with one bolt left to be installed. A small hole in bolt and a piece of wire and the last bolt was installed.
by: Jeffrey 12/07/2022
Perfect fit
by: Colt 04/06/2017
2005 Ford F-150
Easy to install and does the job. Would definitely recommend.
by: George 09/10/2021
Perfect fit the first time and best price I could find.
by: Mark 03/02/2021
2004 Ford F-150
Replaced the stock hitch on my 2004 f150 perfectly.
by: Todd 11/20/2021
Very heavy hitch, took longer to install than stated, but a good quality part. Definitely like it better than the multi piece units from other makers
by: Serrano11/05/2020
2004 Ford F-150
Super fast shipping, love the product
by: Tom 12/15/2023
by: Robert09/17/2020
by: Jose 01/29/2021
25
26
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch Recommendation for 2005 Ford F-150 To Use Trucks Max Towing CapacityYour best option would be to go with a trailer hitch that is rated for more weight than what you truck can tow so that you can tow as much as the truck would let you. For that the Curt hitch part # C14357 that you referenced would be a great option confirmed to fit your 2005 Ford F-150. Like you said, this hitch has a capacity of 10,000 lbs and a tongue weight capacity of 1,000 lbs. With towing setups you are limited by the lowest rated component in the setup. So if your truck is rated...
view full answer... - Trailer Hitch Recommendation for a 2005 Ford F-150 FX4For your 2005 Ford F-150 FX4 that only has the bumper hitch I recommend Draw-Tite Class II trailer hitch # 41549. It is rated for 600 pounds tongue weight and 6,000 pounds gross trailer weight. When used with weight distribution it is rated for 1,000 pounds tongue weight and 10,000 pounds gross trailer weight (limited to the capacity of the vehicle). I have linked the installation instructions for you. I also recommend etrailer ball mount kit # EBMK4. It comes with a ball mount with a...
view full answer... - Comparing Curt Trailer Hitches # C14355 and # C14357 for a 2004 Ford F-150The difference between Curt trailer hitches # C14355 and # C14357 is the fit list for each. Curt hitch # C14355 fits a 2004 Ford F-150 Heritage Edition and not the New Body 2004 models. Hitch # C14357 fits the New Body style, not the Heritage, but will not fit any models that have the factory trailer hitch. If you have a 2004 New Body style then there are no hitches confirmed to fit on models that have the factory hitch.
view full answer... - Hitch To Replace Factory Hitch On 2004 Ford F-150 LariatThe factory hitches are often welded on, so you would need to have the hitch cut off if that is the case to have a replacement. All of the aftermarket hitches from all our manufacturers say will not work with factory mounted hitch, so a hitch like the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # C14357 most likely mounts in the same location which makes sense since you are looking to replace and not add an additional hitch to the existing one. Because it hasn't been fitted...
view full answer... - Will Curt Trailer Hitch Receiver C14360 Fit a 2005 Ford F-150The # C14360 is for the 2006-2008 Ford F-150 without the factory receiver. For a Class IV hitch that is confirmed to fit your 2005 Ford F-150 I recommend the Curt Trailer Hitch Receiver # C14357. This hitch has a 2" receiver with a maximum gross trailer weight of 10,000 lbs and tongue weight of 1,000 lbs. just like the # C14360. Keep in mind, if you have a factory hitch installed this will not fit your truck. If you plan on doing some towing and don't have wiring, I recommend the Curt...
view full answer... - Fit & Compatibility of Aftermarket Trailer Hitch #C14357 on 2004 Ford F-150 w/Factory Trailer HitchI spoke to my contact at Curt and he informed me that the Curt Class V Trailer Hitch # C14357 would indeed fit for a 2004 Ford F-150 excluding the Heritage Edition if the factory hitch was removed as long as no portion of the frame or bumper beam is removed in the process of removing the factory hitch. I have linked the above mentioned product to this page for your convenience.
view full answer... - 2005 Ford F150 XL Trailer Hitch Recommendation for Towing Trailer with Tractor LoadedMost likely not. The Curt Bumper Hitch part # E-3S does have a 5,000 lb capacity, but most bumpers do not have anywhere near that capacity. Instead you would need a frame mounted trailer hitch with a higher capacity like the Curt part # C14357. This has a 10k trailer weight rating so as long as your truck has the towing capacity for the tractor and trailer you want to tow (check owner's manual), this hitch would work well for you. For a HD all mount you would want the part # C45341 and...
view full answer... - Troubleshooting Curt Hitch Too Wide for 2004 Ford F-150 The Curt Trailer Hitch Receiver # C14357 is confirmed to fit all models of the 2004 Ford F-150 unless you have a factory hitch installed. What likely happened is that the hitch flexed during shipping. This isn't uncommon since the brackets are designed to allow the hitch to flex with the vehicle after installation. The good news is you can bend it back. Start by inspecting the hitch to make sure you don't see any cracks or chipped paint. These are signs that the hitch may have flexed enough...
view full answer... - Recommended Trailer Hitch for 2004 Ford F-150 Towing 5,500 lbsHi! Although we do not carry the hitch you referenced based on my research it looks like it has a maximum towing capacity of 5,000 lbs and a maximum tongue weight capacity of 500 lbs so you will not want to use it to tow your horse trailer and horses that are 5,500+ lbs. It is unsafe to use a hitch that does not have the correct towing capacity. There are a couple of better options for trailer hitches that I highly recommend checking out. FIrst, if you are certain that your trailer and...
view full answer... - Trailer Hitch & Brake Controller for 2005 Ford F-150 w/ 4-Way & No Factory Hitch for Heavy TrailerWe can get your 2005 Ford F-150 with a 4-way set up with a trailer hitch receiver and brake controller so you can tow your trailer. Since your truck does not have a factory hitch, and you need to tow a heavy 7,000 lb trailer, the hitch that will fit and has the needed capacity is the Curt Trailer Hitch Receiver # C14357. This is a Class IV hitch with a 10,000 lb towing capacity, which is the most available for your F-150. As for the brake controller, since you already have a 4-way, in...
view full answer... - Trailer Towing Capacity of 2005 Ford F-150 with 4.6L EngineThe photo of your F-150's door jamb sticker indicates a gross vehicle weight rating (GVWR) of 6800-lbs. This is the most the truck itself can weigh, including passenger, cargo weight and trailer tongue weight. I checked the online owner's manual for your truck and starting on page 179 the manual notes the towing capacities for each of the many versions of the truck. The manual states: "If your vehicle is not equipped with a heavy-duty trailer towing package, the maximum weight your vehicle...
view full answer...
- Trailer Hitch Receiver for The 2004 Ford F-150 STX With The New Body StylingYes, the Curt Trailer Hitch Receiver # C13352 will fit your 2004 Ford F-150 STX as is confirmed to work on all models that have the new body that did not include the factory hitch. This hitch will require drilling new holes into your frame on your f-150. I recommend the Curt Trailer Hitch Receiver # C14357 as it will not require drilling or welding on your f-150. It will instead utilize the factory holes that are already in your frame to mount the hitch. This is also a Class IV hitch...
view full answer... - Towing Capacities, Trailer Hitch and Wiring for 2005 Ford F-150 SuperCab 4WD With 5.4L V8According to Ford, a 2005 Ford F-150 SuperCab with four-wheel drive and a 5.4L V8 will have a capacity between 7,300 lbs and 9,300 lbs depending on what wheelbase it has and what axle ratio it has. I recommend finding what yours is and looking in your owner's manual, which will have these capacities. Then for a trailer hitch you can add the Curt Trailer Hitch Receiver # C14357 for a heavy duty, Class IV hitch and if you need to add a wiring harness the Plug-N-Tow (R) Vehicle Wiring Harness...
view full answer... - Recommended Trailer Hitch for 2005 Ford F-150 to Replace Factory Hitch Compromised by RustThe Curt Trailer Hitch Receiver # C14357 is a confirmed fit for your 2005 Ford F-150 but will not fit with the factory installed hitch. You will need to remove the factory hitch to install an aftermarket hitch like this. This is the strongest hitch option, so it is my recommendation for your application. It is an easy installation and has a nice black powder coat finish to resist rust. This hitch will work very well as long as the rust has not compromised the truck frame.
view full answer... - Trailer Hitch and Wiring for a 2004 Ford F-150 New Body StyleYes, Curt trailer hitch # C14357 will fit the 2004 Ford F-150 new body style. The recommended ball mount for this hitch is # C45341. It takes a ball with a 1-1/4 inch diameter shank. And if your truck did not come with a trailer connector you can use # C55551 to add a 4-Way flat to the rear of the vehicle.
view full answer... - Compatibility of the Curt # C14357 on a 2004 Ford F-150 The Curt Trailer Hitch Receiver - Custom Fit - Class IV, # C14357, can fit the 2004 Ford F-150 truck if that has never had a factory installed hitch. The factory hitch uses part of the bumper structure and if removed aftermarket hitches will not be able to mount to the frame and bumper points.
view full answer... - Dual Receiver Hitch for 2017 Ford F-250 Trailer hitch fits for the 2004 Ford F-150 and the 2017 Ford F-250 are not the same. Hitch fits confirmed for each vehicle are shown on the two linked pages. We have 2-inch hitches rated for 10,000-lbs for the F-150 but only 2-1/2-inch hitches of higher capacity for the F-250. Among the fits for the F-250 is the TorkLift SuperHitch Magnum Trailer Hitch # TLF1008-30. This is a dual receiver hitch that features both a 2-1/2-inch and a 2-inch receiver on one hitch. The top 2-1/2-inch receiver...
view full answer... - Recommended Plug-In Adapter To Install Tekonsha Prodigy P3 90195 In 2005 Ford F-150 W/ Factory 4-WaySince your 2005 Ford F-150 has the factory trailer brake controller port underneath the dash, the Tekonsha Plug-In Wiring Adapter # 3035-P you mentioned is correct for installing your Tekonsha Prodigy P3 # 90195. In addition the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # C14357 you were looking at is confirmed to fit your truck as long as it does not have a factory trailer hitch receiver. It sounds like your truck has a 4-way connector but not a 7-way connector based on...
view full answer...
- Stamp On 2005 Ford F-150 Says 9,900 Lbs but How Much Weight Can I TowI was able to find the owner's manual for the 2005 F-150 4x4 5.4 Supercab Lariat. The 145" wheel base SuperCab 5.4L with 3.73 rear axle ratio has a maximum GCWR of 15,000 lbs if you have 17" tires. It has a maximum trailer weight of 9,300 lbs. If you have 18" tires the GCWR is 14,500 lbs and maximum trailer weight is 8,800 lbs. The 133" wheel base 5.4L and 3.73 rear axle ratio with 17" tires has a GCWR 13,500 lbs and a maximum trailer weight of 7,800 lbs. The 18" tire version has a GCWR...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Zack K
Written by:
Laura H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James
6/4/2021
It is a solid hitch. Highly recommend it.