Trailer Hitch Receiver for The 2004 Ford F-150 STX With The New Body Styling
Question:
Will this hitch fit my 04 f150 STX NEW BODY ?
asked by: Mike N
Expert Reply:
Yes, the Curt Trailer Hitch Receiver # C13352 will fit your 2004 Ford F-150 STX as is confirmed to work on all models that have the new body that did not include the factory hitch. This hitch will require drilling new holes into your frame on your f-150.
I recommend the Curt Trailer Hitch Receiver # C14357 as it will not require drilling or welding on your f-150. It will instead utilize the factory holes that are already in your frame to mount the hitch. This is also a Class IV hitch that is stronger than the # C13352 that is only a Class III. And it is also confirmed to fit all models of the new body style F-150's that did not come with a factory hitch.
If your F-150 did not include any trailer wiring provision the Curt T-Connector Vehicle Wiring Harness # C59236 can be used to give you a 4-flat trailer connection. If you require a 7-way the Universal Installation Kit for Trailer Brake Controller # ETBC7 can also be installed with the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 to give you trailer brakes.
Products Referenced in This Question
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 1000 lbs TW
- 10000 lbs GTW
- 12000 lbs WD GTW
- 2 Inch Hitch
- 1200 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 10000 lbs WD GTW
- 2 Inch Hitch
- 1000 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Best Air Bag Suspension (2023)
- Q&A: Diagrams For Wiring 3-Axle Trailer With Brakes, Breakaway, And Lights
- Q&A: Complete Wiring for Lights, Electric Brakes and Controller for a 94 GMC 1/2 Ton Truck and Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: LED Indicator Stays On All the Time When Trailer is Plugged Into 7 to 4-Way Adapter 47345
- Article: Performance Chips and Modules
- Q&A: Hitch Recommendation for a Ford E-450 Bus
- Article: Stability Control for Heavy Duty Vehicles
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Tire and Wheel Combo to Replace a 20.5-8 x 10 Tire
- Q&A: Towing a Trailer with Electric Brakes with a Semi Tractor with Air Brakes
- Q&A: Mobile Home Axle Conversion to Electric Trailer Brakes
- Article: Best Ladder Racks