Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(38 reviews)
Price: $239.33
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13554
Retail:$498.66
Our Price: $239.33
You Save: $259.33
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (38)
- Q & A (0)
- Photos
CURT Trailer Hitch - 13554
- Class III
- 2 Inch Hitch
- 4000 lbs GTW
- Visible Cross Tube
- CURT
- 400 lbs TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 4,000 lbs
- Maximum tongue weight: 400 lbs
- Not rated for use with weight-distribution systems
- Per vehicle manufacturer, rear wheel drive models are not rated for trailer towing: consult dealer before installing. All loads, such as cargo carriers and bike racks, must be supported by stabilizing straps (sold separately).
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13554 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2009 - 2012 Infiniti FX35
- 2013 - 2013 Infiniti FX37 All Wheel Drive
- 2013 - 2013 Infiniti FX37 Rear Wheel Drive
- 2009 - 2013 Infiniti FX50
- 2014 - 2017 Infiniti QX70
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13554
Average Customer Rating: 4.8 out of 5 stars (38 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: William04/28/2024
Was quic delivery. The one end haf a bend to it. Had to pry n use 3lb hammer to get it to fully line up. So maybe dropped by ups and damaged corner but git it installed
by: Matt M05/20/2017
2014 Infiniti QX70
By me installing this solo, it allowed me to get some new tools (aviation snips, torque wrench and small screwdriver), so that was a plus. It took me ~2.5 hours to complete the job. The pain point was having to remove rust from an existing threaded hole on the car using copious amounts of WD-40 and a thread chaser. I plan to connect my Saris 4 bike rack to the Class III receiver. The combination of the written and video instructions were helpful enough for this novice to get it done alone. Ideally, a jack stand of some sort would have helped me complete the job a bit faster.
by: Mark R.09/12/2022
2012 Infiniti FX35
I brought the hitch to a professional installer. At one point he was having trouble with fitment, & told me that he thought the hitch may have gotten bent during shipping & that he couldn't put it on & I would have to get another hitch sent out.
I called etrailer customer support to see about exchanging the hitch I had with another one& explained to her what the installer had just told me. She started explaining that the hitch is meant to be bent a little in order to get it to fit. I asked her if she was willing to speak to the installer... She was.... I put her on the phone with the installer & she explained the proper method to use to bend the arms of the hitch & also sent an email showing the procedure.
One hour later I was driving home with the hitch installed thanks to the great customer service from etrailer!!!
by: Mark VA03/24/2017
I always buy from etrailer. I think this is my 5th or 6th hitch from them. Their knowledge, experience, quality and customer service are always world class.
by: William H06/04/2017
2012 Infiniti FX35
Fits well easy install. Best choice for those with FX Infiniti.
by: Peter 05/18/2021
The quality and style fits perfect with some minor splash/ molding modifications. The biggest suggestion and tip, see where all the bolts go first by testing as they are not labeled. Then when installing the hitch, you will need to back one of them out to get the passenger side angle bracket in.
This is my second Curt Hitch and they are very clean and true to the model of car with a low profile.
by: John 06/26/2023
2017 Infiniti QX70
FIT PERFECTLY, QUALITY PRODUCT
by: Eric 10/13/2021
It’s a good quality hitch. I had hard time to fit one or two bolts on there. They didn’t want to go in but there are 10 bolts in total. Other then that everything is good. I put the bike rack on there and had no problem with it.
by: Robert10/16/2020
Ordered the hitch receiver and the wiring kit. Items were shipped quickly, and between the video online and the directions installation was easy. Great folks, great products and great communication before and after the purchase. Thanks!
by: kevin m03/28/2017
this is the 3rd hitch and wiring package I have purchased from etrailer.
I always call direct and get great service and quick delivery.no need to look anywhere else they have this sh** down....thanks
by: Denitra J07/07/2015
Great quality product, got it installed at a local shop and my Yakima FullSwing bike rack fits in great.
by: RuEL02/01/2023
Perfect fit for my FX35.
by: Steven C 01/17/2017
2013 Infiniti FX37
Hitch fit perfectly with no frame, suspension or body mods and I was able to install in under 1 hour
by: Junior06/23/2016
Delivered to me 3 days after I ordered it. Decent box with handles with all assembly hardware inside.
by: PB12/05/2014
2015 Infiniti QX70
My dealer couldn't order the part on a 2015 vehicle yet. I found it here at a reasonable price with free shipping. I received the item quickly. I'd definitely recommend this Company
Pb
12/8/2015
Unfortunately the hitch we received was bent. We had it professionally installed, but, its noticeably bent. We decided to kept it because I had an immediate need to use it.
by: Carlos MTB12/10/2012
2011 Infiniti FX35
Great service by eTrailer guys, fast shipping and easy installation by my mechanic.
by: Terri G01/23/2017
Great product! No problems! We use it to carry our road bicycles.
by: Marvin08/03/2017
2010 Infiniti FX35
Great product, easy to install with proper tools and help.
by: John10/04/2016
2011 Infiniti FX35
Works well, not as heavy as some, would recommend
by: Sam 08/06/2021
2011 Infiniti FX35
Shipping was alright. Product contained components. Certain bolts didn’t fit.
by: Mark06/12/2021
Infiniti FX50
Product won't fit my 2012 fx50 due to the width not being dimensioned properly
by: Steve 07/21/2021
From the time of ordering , All the way to delivery. Perfect everything !!
by: Robert McGehee05/26/2015
Hitch arrived one day after order. In excellent condition. Plan to install this week. Thanks for the quick delivery of a quality product!
by: Chuck 05/02/2024
2010 Infiniti FX35
25
42
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Trailer Hitch Receiver for a 2015 Infiniti QX70 with an ARK Performance Exhaust SystemAfter reviewing the attached photo, It appears as if the 2015 Infiniti QX70 in question has the Curt Trailer Hitch Receiver part # 13554 installed. Unfortunately, none of our aftermarket trailer hitch receiver manufacturers (Curt/Draw-Tite) are able to confirm fitment on vehicles with an aftermarket exhaust system.
view full answer... - Ground Clearance of Trailer Hitch Receiver for 2017 Infiniti QX70You should not have any issues with the ground clearance with a trailer hitch for your 2017 Infiniti QX70. When we test-fit the Curt Trailer Hitch Receiver # 13554 on this same vehicle, it measured 13 inches from the top of the receiver to the ground, which is about 11 inches from the bottom of the receiver to the ground. That is a fairly standard height so unless you have quite a significant decline, there won't be an issue. Along with the hitch, if you plan on towing with your Infiniti...
view full answer...
- How Visible is the Curt Class III Hitch # 13354 when installed on a 2010 Infiniti FX35My technical contact at Curt Mfg. was kind enough to send me a photo of the Curt Class III Round Tube Receiver Hitch, # 13554, on an Infiniti FX35. I attached this photo for you to see. The hitch in the photo is blue because it is the engineering mockup for the hitch, but it does show the final position of the hitch when correctly installed. The hitch in black will blend much better with the vehicle underbody. None of the hitches we carry for the 2010 Infiniti FX35 will be completely...
view full answer...
- Recommended Trailer Hitch For 2015 infiniti QX70 With Rear Wheel DriveThe trailer hitch we have that is designed to fit your 2015 QX70 is the Curt Trailer Hitch, part # 13554. This is a Class lll hitch and it has a 2 inch receiver opening. A note form Curt states that all non-trailer loads - bike racks, cargo carriers and so forth - should be supported with stabilizing straps like part # 18050. Failure to properly support these loads will void your hitch warranty from CURT.
view full answer... - Installation Time for the Curt Wiring Harness # C56074 on a 2009 Infiniti FX35Curt has listed an installation time of the wiring harness # C56074 as 30 minutes for the professional installer. I spoke to my installer and he said for a novice you should expect 1 hour and a half at the very least. I have linked the instructions to this page for your convenience. I do want to let you know that the Curt Hitch # 13554 will require you to use a stabilization strap # 18050 with any non-trailer loads (bike racks, cargo carriers, etc.) which is why I instead recommend the...
view full answer... - Appearance Of Trailer Hitch When Installed On 2013 Infiniti FX50SThe design of the trailer hitches we offer that will fit your FX50S have a visible crossbar. We offer two hitches for your vehicle. We have photos of the installation of the Curt Trailer Hitch, part # 13554 and as you can see in the attached photo, the crossbar is visible. This is a Class lll trailer hitch and it has a 2-inch receiver opening. It is a round-tube design which does make it more attractive in many folk's opinion. The second hitch we offer is designed in much the same manner...
view full answer...
- Recommended Trailer Hitch for 2017 Infiniti QX70There are a pair of trailer hitches that are a confirmed fit for your 2017 Infiniti QX70, the Curt # 13554 and Draw-Tite # 75778, which replaced the Hidden Hitch and is the same style. The truth of the matter is both of these hitches are going to look essentially the same on your Infiniti; if you check out the accompanying sketches from the installation instructions from both hitches you will be able to see that they will wind up in the same position. Since these hitches are the only fits...
view full answer...
- Trailer Hitch Recommendation for 2016 Infiniti QX70SFor a trailer hitch for your 2016 Audi QX70 you will want the part # 13554. This hitch has been confirmed as a fit for both the all-wheel drive and rear-wheel drive models so it would work great for you. As of right now the only trailer wiring option I can recommend will be at your local Infiniti dealer. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4...
view full answer... - Hitch, Bike Rack, and Ski Carrier for 2017 Infiniti QX70For a hitch the Curt # 13554 is the best option for carrying a bike rack and ski carrier that fits your 2017 Infiniti QX70. Since you want ability to carry skis too you'd have to use the Thule Tram part # TH9033 which adapts Thule hanging bike racks to a ski carrier like the very popular Thule Hitching Post Pro part # TH934XTR that I would also recommend. This can carry up to 4 bikes and has all of the nicer features on found on expensive bike racks like anti-sway cradles and anti-rattle...
view full answer... - Is there a Hitch for a 2010 Infiniti FX35 That Mounts Above the ExhaustAll of the trailer hitches offered for your 2010 Infiniti FX35 will install below the exhaust and in pretty much the same way since all will use the same attachment points on the vehicle's frame. There is no hitch available for your car that has a cross tube that sits above the exhaust. The linked page will show you all hitches offered for your FX35 and the linked photo shows you the rear of a 2010 FX35 with Curt hitch # 13554 installed. Each hitch fits both all-wheel-drive and rear-wheel-drive...
view full answer...
- Replacement Hardware Kit For Curt Hitch # 13554 On A 2009 Infiniti FX35Unfortunately, The Replacement Hardware Kit # RHK will not include the bracket that appears in the image for Curt Hitch # 13554. I contacted Curt and they do not sell the bracket alone. You will have to repurchase the entire hitch to be able to get the bracket. I attached an installation link below for The Curt Trailer hitch being installed onto a 2010 Infiniti FX35. It will be the same installation process for your 2009 Infiniti FX35. If you have any further questions please reach back...
view full answer... - Hitch and Trailer Wiring Recommendation for a 2011 Infiniti FX35For your 2011 Infiniti FX35 the Curt Hitch part # 13554 is the correct hitch. For trailer wiring you would also need the Curt Harness part # C56074 since it is not included with the hitch. I attached an install video for the hitch for you to check out as well. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a...
view full answer... - Hitch Recommendation for a 2015 Infiniti QX70Yes, the Curt Hitch part # 13554 that you referenced has been confirmed to fit your 2015 Infiniti QX70. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow the trailer level, use...
view full answer... - Do I Need To Use an Auxiliary Strap When Carrying a Thule Bike Rack On Curt Trailer Hitch # 13554Curt recommends using Curt Bike Rack Strap with Cambuckle, part # 18050, with hitch mounted bike racks and other hitch accessories. I would recommend using part # 18050, with your Thule Bicycle Rack, as it is recommended by Curt as a precaution to reduce the jarring and torque applied to the hitch from the weight of the bike rack and bicycles.
view full answer... - Will Thule TH9058 Camber Bike Rack be Compatible with Curt 13554 Hitch on 2016 Infiniti QX70The Curt # 13554 Class III hitch would work perfectly on your QX70. The Thule # TH9058 Camber 2 bike rack would be completely compatible with the hitch, and your vehicle. When installed, you should have about 13 inches of ground clearance which is enough that any sort of raised adapter isn't necessary. Actually, Thule doesn't recommend using an adapter, anyway. The rack includes an anti-rattle hitch bolt, but a lock is available separately as part # THSTL2. I've linked to an install video...
view full answer... - Hitch and Towing Capacity Recommendation for a 2014 Infinity QX70When determining the overall towing capacity of a vehicle you must always go with the lowest rated component as the overall capacity since the setup is only as strong as it's weakest component. The Curt Hitch part # 13554 can handle 4,000 lbs of trailer, but your vehicle can only handle 2,000 so 2,000 lbs would be your overall capacity. If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane H
Test Fit:
Robert C
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Mike H
Video by:
Andrew K
Video by:
Kathleen M
Video by:
Michael B
Written by:
Lindsey S
Expert Research:
Robert G
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mark V.
3/24/2018
Ready to buy some additional trailer accessories. etrailer is always the first and last stop.