Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(332 reviews)
Price: $206.65
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13084
Retail:$329.95
Our Price: $206.65
You Save: $123.30
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (332)
- Q & A (0)
- Photos
CURT Trailer Hitch - 13084
- Class III
- 2 Inch Hitch
- 5000 lbs GTW
- Concealed Cross Tube
- CURT
- 500 lbs TW
- 6000 lbs WD GTW
- 600 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum GTW when used with weight distribution: 6,000 lbs
- Maximum tongue weight: 500 lbs
- Maximum TW when used with weight distribution: 600 lbs
- Maximum gross trailer weight: 5,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13084 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 1984 - 2001 Jeep Cherokee
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Too difficult to install
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13084
Average Customer Rating: 4.9 out of 5 stars (332 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: David02/28/2023
I gave it a 3 because it did not fit as well as the video showed on my 1999 Jeep Cherokee XJ, the bolt holes on both sides did not match up exact, had to use a small sledge hammer to bang in past rear bumper, it was a really tight fit. I will need to drill or bore out the other bolt holes to get the remainder of the three bolts in. See photos below. Overall I happy with it. Built sturdy. I would still recommend this hitch, not all XJs’ are built equal.
by: Dale 09/07/2022
2000 Jeep Cherokee
I bought this hitch a year ago. It fit our 2000 Jeep Cherokee perfectly (my son and I installed it ourselves). I would recommend this hitch if you are in the market for one.
Dale
9/8/2023
Ive had the hitch for a year. There have been no issues and it still is as solid as ever. I would recommend this hitch for your Jeep Cherokee.
Mike L.
11/1/2023
@Dale Thanks for your recommendation of the Curt # 13084 for the 1984-2001 Jeep Cherokee, we appreciate that!
by: Steve M05/23/2015
1997 Jeep Cherokee
This is my 3rd hitch from etrailer and another great transaction & install. Easily saves 2-3 times of what it would cost to have it done at a shop. The first 2 hitches were installed on newer vehicles, but this recent hitch was installed on a 1997 Jeep Cherokee. The online videos are a lifesaver! The weld nuts on the old Jeep were rusted really bad, but in the video they explain the best way to clean them out and it works. Their wiring kits are fool-proof & super easy to install. I'll continue to use etrailer for all my towing needs.
Todd
12/15/2015
Thanks for the pictures. The design of the hitch with the 4 bolts was unclear how the 4th bolt went on until your picture of the bolt going thru the muffler hanger bracket, thank you so much.
Steve M.
5/26/2016
Hitch has been rock solid for a year now
by: Kirt07/11/2022
So I am late posting this review because the Cherokee I purchased the hitch as a replacement for was totaled before I had a chance to install it. It was to be an upgrade for a lightweight hitch that was needing replacement. So the hitch hung around until I finally installed it on our only Cherokee that had never been used for towing. So this vehicle has never had a receiver installed before. It is bone stock, no pans or shields and never hit in the rear. Yet, the hitch didn't fit. The side plates were too long and didn't clear the bumper. We had 3 other Cherokees all with hitches so I know the bumper can be cleared. This bumper was in the proper factory position and not bent. I had to notch the bumper on both sides with an angle grinder to allow the hitch to line up with the mounting holes in the frame. As long as Cherokees have been around, you would think the hitch design and welding would be built to fit without cutting the vehicle. The other brand hitches fit fine on our other vehicles.
The other issue was the instructions. They were backward compaired to how a Cherokee XJ is built. I know it is a minor issue. And anyone that couldn't figure out the proper install despite the backward sheet is not skilled enough to install a hitch anyway. My issue with it is this. As much as you pay for the product, and the instructions are backward? It makes me question if attention to detail and quality is not in the small stuff, how good is the rest?
On the brighter side, the hardware kit was easy to use and the wire to pull the bolts and washers into the frame worked very well. Even though the instructions showed the wrong locations for the factory nut strip. It was the first time I have installed a receiver on a Jeep that didn't already have the nut strip (on both sides). Cherokees with only a tailpipe hanger but no tank shield or receiver only have the nut strip on the passanger side. The instructions show the strip and hardware to be on the driver side.
Also, this hitch is very heavy and I didn't have a helper that day, so I rested one side on a jack stand while I got the hardware started on the other side. No problem. And where the bumper had to be notched, you can only see it from underneath. But I used a skirt of spray bed liner to prevent rust to the bumper. Mopar Rust Penetrant MS-3613 a few days ahead of time helps to get the tailpipe free from the hanger bracket and make room to get a tool on the nut strip bolt.
by: Rick05/25/2017
1996 Jeep Cherokee
I'm very happy with this hitch. Shipping was quick, price was great, and the hitch was easy to install by myself. I watched the installation video and followed the process. I was most impressed that the holes on the hitch matched exactly with the holes in my car's frame and the process to pull bolts through the frame worked perfectly. Ready to go fishing??
Rick
5/26/2018
Hitch is great 1 year later. No rust or loose parts.
by: Brendan H02/21/2016
Volvo
The product is constructed for heavy duty long life. The welds are perfect with attention to detail. I purchased the Curt brand because of the added weight rating and tongue weight rating. I had a problem with a weld nut on the passenger side and Rebecca in customer service was outstanding with her support! George and Rebecca shipped out additional parts to me right away and provided me with a video on how to work around the problem. I have nothing bad to say about my experience. This is the second hitch that I have purchased from eteailer and I will be getting a third for our Volvo XC real soon. Even with the weld nut issue if you have an air compressor and impact sockets you can install the hitch in under an hour. I did not have an extra set of hands, I am disabled so I built a rack out of scrap 2x4's and plywood and used my floor jack to raise the hitch and hold it into place.
by: Todd M12/21/2011
2000 Jeep Cherokee
this is open a 2000 cherokee sport The back hitch was great went right up and all was nice fit just don't take off the bumpier the hitch hides the nuts and make it even harder to get off and on same with the front hitch and you can't put the bottom piece on but of then that it went right up the times they have are after you take the bolts and nuts off and clean it all then you can put them in at that time I broke two in the front and one in the back I had to weld a nut on to them to get them out
P.S. the wiring harness is a must have very clean instill with it no cut wires I love that
by: David04/08/2020
1996 Jeep Cherokee
Surprisingly fast shipping during this pandemic. Once we got it my son and I had it installed in about an hour. He can't wait to tow our offroad trailer. Thanks for such great service and a great product.
David C.
4/9/2021
Spectacular!
by: Scott A.06/21/2011
This is my second hitch from etrailer. Simple installs with the instructions and supplied mounting hardware. This time I got a hitch and ball mount kit and it couldn't have been any easier. The different ball mount drops fit my trailers nicely.
by: Aaron R.08/30/2014
1996 Jeep Cherokee
When I bought my 96 XJ it had everything I wanted, except tow package. The Curt receiver & Curt wiring harness are excellent products. Thanks etrailer.com
by: Glenn W.09/30/2019
It was a while before getting the hitch on my Jeep as I decided to get the Jeep painted first. A nice fit, the hitch bolted up easily. (first replacing the 23 year old nuts). I mostly tow a light canoe trailer.
by: Troy G.03/14/2011
Jeep
I received the hitch very quickly and decided not to wait for a second set of hands to help me install it. I don't have access to a lift, so I just back the Jeep up onto a set of ramps, which gave me plenty of room to work. The bolt leader made the install go pretty smoothly and I just supported the hitch on a set of jack stands. Easy enough to line up the bolts. 40 minute install time might be a little misleading... I'd say give yourself a good 90 minutes just in case you run into any snags.
Watching the install video was very helpful as well.
I also purchased the wiring harness and that was also an easy install.
Great product... fast shipping... fairly simple install... one happy customer. THANKS!
by: Tommy S.03/18/2013
2000 Jeep Cherokee
The product was delivered and assembled as advertised. It was very helpful to have the video instruction in addition to the paper instructions. My wife and I just moved across the country and carried 2 bikes on a bike carrier off the hitch and we had no complaints.
Very solid product.
by: Bobby06/29/2018
Jeep Cherokee
Easy bolt on for my Jeep Cherokee. Followed the instructions on a you tube video and even with a broken shoulder it was a piece of cake. All the hardware was high quality along with the hitch. I would recommend etrailer to anyone looking for great friendly service!
by: J04/11/2020
The Trailer hitch fit perfectly on my 1988 Jeep Wagoneer. It replaced the old rusted out trailer hitch. The old hitch was awful to get off but the new hitch went on very easy
by: Mark D04/15/2023
If not for missing hardware, the hitch matched frame holes perfectly. I contacted Kelly on 4/14/2023 for the additional hardware needed to complete hitch installation. Waiting on hardware. Hoping the rest of the install goes without any MORE problems…would have awarded 5 stars if not for missing hardware. Hardware needed in supplied hardware package is NOT available at Home Depot or Lowe’s..
by: Eldin08/19/2023
Other than the rusty bolts on my Jeep, this was a pretty straight forward install. I even did it by myself in my driveway at night with a flashlight.
by: David03/09/2023
2001 Jeep Cherokee
This hitch seems pretty sturdy and well built. etrailer placed a product video on several different hitches for my model with was very helpful in my decision. Easy to install and connected fine. It was very easy to find this part when I entered my vehicle information. The video's on how to install were spot on.
by: Ron08/29/2020
The hitch fit perfectly.However I had to modify one of the flat washers because the frame hole location was out a 1/4 inch.
The video makes it look easy with a hoist,but doing the install in my driveway was much more complicated.took 3 hours for the install
Looks great
by: Troy Tumlin07/09/2016
2000 Jeep Cherokee
Great product,received super quick,installation was a snap had all the hardware needed.very happy with purchase highly recommend this company from the site purchase thru delivery process and finally follow up!!
by: Moses01/20/2023
Jeep Cherokee
This was my first time using etrailer and I'm pretty gratful they had all the parts in stock and shipped within a timely manner. the harness was plug and play! It completely works for a 97-01 jeep cherokee xj with no modications.
by: Marty04/21/2022
Had bought a Reese universal fit from a local pars store….wasn’t a big fan of the way it fit and hung down. Ordered a Curt it was a direct fit, so much better
by: Kerry O.01/31/2017
1999 Jeep Cherokee
Very well made. Good Hardware. Fit was good. Online instructions were a plus. But installation needs two people. I installed it myself laying on my back but it was heavy and awkward to lift and align and I needed a set of extra hands several times. I am 6'4 and 250 lbs...yet had difficulty. A smaller person cannot install this hitch them self without help.
The hardest part was replacing the original Jeep nut straps inside the frame rails. The originals were badly corroded resulting in the welds of the nuts breaking allowing the bolts to turn and not allowing removal. As a result I had to remove the rear valance, rear bumper and bumper mounting brackets and access the nut straps from the rear of the frame rails. They can be a considerable challenge to remove. After cutting / grinding off the frozen bolts from the bottom...the original nut straps were removed and new straps were ordered. It was no fault of the trailer hitch that the mounting nut rails were so corroded...but it was the most difficult, time consuming hitch installation I have ever done. Not counting the time necessary to order the replacement nut straps...actual installation took over six hours....so be forewarned. Had my 99 XJ not been so rusty and had the original nut straps been in good condition...the installation could have been done in a an hour. Inspect your Jeep before installation and be sure to have replacement nut straps on hand if the originals are rusty, damaged or missing. I first tried to repair and re-thread the original nut straps...but they were too badly damaged.
Just order replacements.
The nut straps are called "Sill Reinforcement Brackets" and the part numbers are left side : #52001175, right side : #52001174. They are present in many XJ Cherokees from the factory from 1984-2001. But some Jeeps may not have them depending on original options. They were about $22 each and well worth the additional cost. Installation of the hitch without them would have been 10x more difficult.
Kerry O.
1/31/2018
Hitch has been bulletproof. Have received a number of compliments on how solid the hitch looks. Only problem is related to the design of the Jeep Cherokee and not the hitch itself. But to do any service to the fuel pump or the anti drain back valve on top of the fuel tank...the tank has to be removed from the vehicle. This requires that the hitch must first be removed...and as pointed out previously...reinstalling the hitch is a two man job. If the design of the hitch would allow fuel tank removal without removing the hitch first....I would give the hitch a perfect score.
Mike L.
1/31/2018
Just a heads up for you, the installation hardware for the hitch is designed to be torqued once. If you need to remove the hitch and reinstall it, it's recommended that new hardware be obtained. You can get replacement hardware by using part # RHK. On the product page, input the part number of the hitch 13084 into the provided field and select 'Curt' from the drop down menu.
Helpful Links
by: Steve F.07/19/2015
Ordered the hitch and wiring on Friday at lunch and it was on my porch Tuesday at 2:00 pm.
My suggestions are as follows and may reflect others comments.
I regard the following tools as mandatory: an 18mm six point socket for the tailpipe bracket support with an 18 to 24 inch breaker bar, a 12mm x 1.75 tap and 2 good safety stands minimum. Safety glasses too, and remember to chock the front wheels.
The first thing to attack is the bracket. Prior to this chase 1 or 2 of the right hand holes with the tap and some cutting oil if you have it. Use one of the bolts in the kit to hold the nut plate in the frame tube in place. Go after the bracket bolt directly from the rear of the vehicle. If you decide to loosen the front bracket bolt it may be easier to remove the right rear wheel to get better access to it. After bolt removal chase the remaining involved holes with the tap. On the left side use a die grinder or round file
to extend the 2nd hole from the rear about 3/16 to 1/4 forward to give space for pulling the block forward far enough for the carriage bolt head to feed in from the rear due the the back rail
extending upward and limiting access. Place your blocks and carriage bolts, figure out a way to get the hitch up against the frame and use 2 nuts on adjacent holes to hold up the left side.
Go to the right side and put in the 4 bolts loosely. The 2 bolts placed close together on the left give a greater amount of wiggle room to locate the right. Place all nuts and washers on the left side, check placement of hitch and tighten down. If happy, torque them all down and you're good to go.
It will take longer then 30 minutes.
Steve F.
7/18/2016
Hitch works fine and its nice to have one rated for 5000 lbs. even if not needed. No substitute for sturdy.
by: Dave12/18/2013
1996 Jeep Cherokee
I bought the #13084 curt hitch for my 96 jeep. Etrailer expedited the shipping at no extra charge and the part was on my doorstep in Virginia 5 days after the I placed the order. I had the hitch installed in an hour after I started. My wife predicted i would be cussing out in the garage like i usually do but i was proud to prove her wrong (this time) :) I used 2 jack stands to hold the hitch in place while i started the nuts on the bolts. Worked like a champ. Also the video was very helpful in showing the steps using the fishwire to install the carriage bolts. I got my christmas present and the next step is the boat for my birthday . Definitely will recommend etrailer to my friends.
Dave
12/18/2014
The hitch is working great . No boat yet but works well with my bike rack and trailer . Excellent product and great company
25
372
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Are Any Trailer Wiring Harnesses for 1996 Jeep Cherokee Plug and PlayI can completely understand not wanting to splice wires, but I checked with the manufacturers and there is no option for a plug-and-play or plug-in trailer wiring harness for your 1996 Jeep Cherokee, so hardwiring is the only way to add a trailer wiring harness. For that I recommend the Upgraded Circuit Protected Tail Light Converter Hardwire Kit with 4-Pole Connector and Circuit Tester # 119178KIT. I like this kit because it includes everything you need, including the circuit tester...
view full answer... - Does Curt Hitch Fit All Models Of 2000 Jeep Cherokee XJ and Trailer Wiring RecommendationThe Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part # 13084 is a fit for all models of the 2000 Jeep Cherokee however XJ is not a model. XJ is what the second generation (1983-2001) of Jeep Cherokees are called so the hitch will fit your 2000 Jeep Cherokee however it will require drilling through the frame mounted, closed sided steel skid shield if the Jeep has one which is why I recommend the Curt Trailer Hitch Receiver part # 13160 because it does not require drilling at...
view full answer... - Hitch Installation Hardware and Trailer Wiring Harness for 1997 Jeep Cherokee CountryYes! We can help you order replacement hitch installation hardware for the hitch you already have for your 1997 Jeep Cherokee Country. We can also get you set with a wiring harness. For replacement hitch hardware use part # RHK. Just enter that part in our search field and press enter. Then click on the RHK. On the next page you'll enter your hitch part number and the manufacturer name. This should be noted on the safety/warning sticker on your hitch. This will tell us the exact hardware...
view full answer... - What Is The Difference Between Curt Trailer Hitch # 13084 and # 13160The only difference between the Curt Trailer Hitch # 13084 and the Curt Trailer Hitch # 13160, is the shape of the tubing. Curt Trailer Hitch # 13084 has a square-tube design while the Curt Hitch # 13160 has a round-tube design. The square-tube hitch will be more visible on the back of your Jeep while the round-tube hitch will be tucked up just a little more. The round-tube hitch is designed to be a more sleek design. Both the Curt Hitch # 13084 and # 13160 have the same towing and tongue...
view full answer... - How to Order Replacement Hitch Installation Hardware for Curt Hitch # 13084We can help you with replacement hitch installation hardware for your Curt Class III hitch # 13084. Simply enter the part # RHK into our search box and on the next page enter your hitch part # 13084 and select Curt from the drop-down menu box. We'll then assemble the exact hardware parts for your re-installation. It is always necessary to use new hardware when a hitch is re-installed and you'll need a torque wrench to install the fasteners to the correct specs. These are shown in the...
view full answer... - Carriage Bolts That Come With Curt Trailer Hitch Receiver 13084 and How To Clean WeldnutsThe Curt Trailer Hitch part # 13084 comes with 6 of grade 8, 1/2-13 x 1 3/4 carriage bolts. I recommend to clean the weld nuts with a brush like part # 814092 before trying to screw in the carriage bolts. It helps to use a brush and WD-40. I have attached a helpful article for your reference.
view full answer... - Cars Compatible with Curt Trailer Hitch Receiver # 13084The Curt Class III Trailer Hitch Receiver # 13084 is only compatible with Jeep Cherokee model years 1984 through 2001. The hardware is only good for one fitting because the bolts are torqued, so if you need the replacement hardware you can use kit # RHK and then type the hitch number in the box and select Curt from the drop down for manufacturer. That kit will come with the hardware and pull wire needed to install the trailer hitch receiver.
view full answer... - Replacement Hardware For Curt Trailer Hitch 13084Yes, you can order the replacement hardware for the Curt Trailer Hitch Receiver # 13084; what you will need is the following: - Replacement Hardware Kit for Trailer Hitches # RHK All you need to do is click # RHK, enter "13084" in the "Hitch Item Number" box and you're set.
view full answer... - Trailer Hitch for 2001 Jeep Cherokee With Skid ShieldThough I'm not 100 percent sure what you are referring to in terms of "clearing" the skid shield, there are different installation instructions (which are linked) for both hitches in regards to that shield on your 2001 Jeep Cherokee which may be what you are looking for. Curt hitch # 13160 will give you 20 inches of clearance from the ground, and according to the install manual you are going to loosen the skid shield's bolts and place the hitch flange between the Jeep's frame and skid...
view full answer... - Will Lets Go Aero # SHP2040 Anti-Rattle Hitch Lock Fit Curt Class III Hitch # 13084The Let's Go Aero # 63232 Anti-Rattle Hitch Lock will fit the 2-inch Class III Curt hitch # 13084 that you referenced. Let's Go Aero also offers an extra-long version for 2-1/2-inch hitches, part # SHP2040-XL. Both of these anti-rattle devices require that the shank of the hitch-mount accessory be hollow not solid. Please see the linked video.
view full answer... - Replacement Hitch Hardware Recommendation for a 2001 Jeep CherokeeWe do sell hardware kits or the trailer hitches we offer. For that you would want the part # RHK. On the product page you will need to select the hitch manufacturer and part number for the hitch you need hardware for. The most popular hitch we offer for your 2001 Jeep Cherokee is the Curt Hitch part # 13084. I also attached a set of install instructions and video for you to check out.
view full answer... - Troubleshooting Bolts Too Big When Installing Trailer Hitch on 1998 Jeep CherokeeIt is actually pretty common for the bolts to seem like they are too big to fit when installing a trailer hitch such as the Curt Trailer Hitch Receiver # 13084 that fits your 1998 Jeep Cherokee. The issue is especially prevalent in more well-traveled vehicles because dirt and corrosion will have taken their toll, making the bolts seem too big for installation. The best option is to use lubricant and then very thoroughly scrub the weld nuts with Nylon Tube Brush # 814092. This can take...
view full answer...
- Availability Of Replacement Hardware For Curt Trailer Hitch 13084 On 1990 Jeep CherokeeWe have exactly what you are looking for! To order replacement mounting hardware for the Curt Trailer Hitch Receiver # 13084 on your 1990 Jeep Cheroke you will need to use the Replacement Hardware Kit # RHK. This kit will include all of the required hardware, including the new fish wires. To get the correct kit you will need to select Curt from the drop down menu and the for the hitch item number enter 13084. I included videos of the products mentioned for you to take a look at.
view full answer... - How to Clean the Weldnuts of a 1998 Jeep Cherokee to Install a Curt HitchYour best option would be to use a tap to clean out the threads of the existing weld nuts on your 1998 Jeep Cherokee. Since the vehicle has a few years on it the weldnuts will be a little bit stubborn. I attached a couple links to the right that you should find pretty helpful as well.
view full answer... - Can Replacement Hitch Hardware be Ordered for Trailer HitchFor replacement hardware for a trailer hitch you will need # RHK. You will need to enter the hitch number in the area provided on the RHK page and then select the manufacturer.
view full answer... - Coleman Tent Trailer Hitch Towing Setup Recommendation for a 1999 Jeep CherokeeFirst let's start with a hitch for your 1999 Jeep Cherokee. For that I would recommend the Curt Hitch part # 13084. Check out the install video I attached as well. For trailer wiring you would want the part # 13084. I attached an install video for this product as well. We typically recommend the use of weight distribution when the trailer weighs more than 50 percent of the tow vehicle. The best way to pick out a weight distribution system is to base it off of the loaded tongue weight...
view full answer... - How to Order Replacement Mounting Hardware for a Hitch for a 1999 Jeep CherokeeIn order to order replacement mounting hardware for a hitch you would need the part # RHK. On the product page you will need to select the hitch brand and the part number of the hitch as well. For example, the part # 13084 is a very popular hitch for your 1999 Jeep Cherokee so most likely the install hardware of this hitch would work well for you.
view full answer... - Size Bolt Leader Needed for Curt Class III Hitch # 13084To install the Curt Class III hitch on a 1995 Jeep Cherokee, you'll need a 1/2 inch bolt leader which is actually included in the hardware pack that comes with the hitch. If you needed an extra for some reason, you'd use part # C58400. If you click the provided link, you can see a video showing how to use the bolt leader.
view full answer... - Trailer Hitch Recommendation for 1995 Jeep CherokeeSince the Class III Curt hitch part # 13084 for your 1995 Jeep Cherokee is actually less expensive than the Class II hitch for your vehicle I would recommend you go with it. Especially since you'll get better capacities and have more hitch accessories made for it. Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes...
view full answer... - Cross Tube Dimensions of the Curt Trailer Hitch # 13084 for a 1996 Jeep CherokeeThe cross tube on the Curt Class III Trailer Hitch, # 13084, is 2-1/2 inches by 2-1/2 inches and the Draw-Tite 6 and 7-Way Trailer Connector Mounting Box, # 18156, will work nicely on this hitch. We have installation instructions and a very detailed video installation of the hitch linked online for you to review. You may want to consider the following items to complete your towing setup. I have included some useful instructions for these items also. T-One Vehicle Wiring Harness, # 119178KIT Brake...
view full answer... - Why Would Trailer Hitch Install Bolts Not Thread Into Vehicle Frame Weld NutsThis is a fairly common problem on vehicles that have seen a few seasons. What ends up happening is that the weld nuts on the vehicle frame end up developing corrosion or collecting dirt and this prevents the bolts from threading in. What you will need to do is clean the threads of the weld nuts and they hardware will thread right in. I attached a help article and video that details how to do this for you to check out.
view full answer... - Replacement Hardware Kit for Curt Trailer Hitch 13084 on a 1997 Jeep CherokeeTo get a replacement hardware kit for Curt hitch # 13084 for your 1997 Jeep Cherokee you will need # RHK. The RHK product page you will need to enter the hitch number, 13084 where indicated and then select the manufacturer from the drop[ down menu. Then just click the add to cart button and our crack team of hardware specialists will assemble the proper kit. I have included links to the instructions and to a video showing a typical installation of this hitch for you.
view full answer... - Which Curt Hitch Will Fit a 2002 Honda OdysseyI have a Curt Class III hitch available for your 2002 Honda Odyssey but it is not the # 13084. You would want the part # C13068 as it is a confirmed fit. The hitch you referenced is designed for Jeeps so it would not fit at all. I attached an install video for you to check out as well.
view full answer... - Hitch Recommendation for a Jeep Cherokee that Will Put Hitch Closest to the Ground as PossibleFrom the top of the hitch opening to ground the Curt Hitch part # 13084 that you referenced will be about 15 inches depending on the height of your vehicle. The Curt Hitch part # 13160 will sit about 5 inches higher. So going with the # 13084 will place the hitch opening approximately 5 inches closer to the ground
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Written by:
Lindsey S
Video by:
Joshua S
Video by:
Zach D
Test Fit:
Nicholas E
Test Fit:
Randy B
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
David G.
3/1/2024
It’s been a year, hard to believe time is flying. The hitch works great, used it quite a bit last year towing, no issues, even though I have a bolt not lining up, but that’s the XJ, not the hitch. I would definitely recommend this hitch from etrailer.