etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Item # e98863
Retail:$274.96
Our Price: $166.94
You Save: $108.02
Confirmed to Fit
2010 Buick Enclave
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (488)
- Q & A (0)
- Photos
- Used (1)
2010 Buick Enclave - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- 2 Inch Hitch
- Class III
- 5000
- Concealed Cross Tube
- etrailer
- 500
- 6000 lbs WD GTW
- 600 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your Buick Enclave's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer
- Matte black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Made in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum GTW when used with weight distribution: 6,000 lbs
- Maximum tongue weight: 500 lbs
- Maximum TW when used with weight distribution: 600 lbs
- Maximum gross trailer weight: 5,000 lbs
- Limited lifetime warranty
Rugged, Matte Black Finish
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
etrailer Technical Support
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
e98863 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
6,000 lbs.
Tongue Weight (TW):
600 lbs.
Tech Tip
Fascia door panel must be removed for hitch installation and may not be able to be reattached. No drilling required for installation , Do not cut or splice vehicle wiring. Only use approved T-One or see auto dealer for trailer tow wiring kit
Complete Towing Package for 2010 Buick Enclave
Retail:$371.59
Package Price:$234.95
2010 Buick Enclave Owners Who Purchased This Trailer Hitch Also Bought...
Popular Enclave Trailer Hitch Accessories
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98863
Average Customer Rating: 4.9 out of 5 stars (488 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Matte black, powder coated steel is durable and corrosion resistant and creates a rugged look.by: Scott07/19/2022
Very easy to install. I took it to my local repair shop and they installed it in 39 minutes.
I have a 2012 Buick Enclave and unfortunately the cover would not fit back on the bumper. Not a big deal because I plan on using the receiver a lot and removing the bumper cover will be one less step to put my bike rack on my car.
by: Paul05/26/2022
2017 Chevrolet Traverse
I FOUND THE ETRAILER TRAILER HITCH TO BE AN EXCELLANT PRODUCT. THE INSTALLATION WENT WELL. THEY PRODUCED A HELPFUL VIDEO AS WELL. HIGHLY RECOMMEND ETRAILER!
Paul
5/27/2023
I am extremely satisfied with the hitch, I use it for my bike carrier. I am sure that it would be just as easy to install a ball mount to use it for a trailer. Another plus is it fits behind my 2017 Traverse facia plate so its not visible.
by: Angelo04/18/2024
2013 Chevrolet Traverse
I ordered a trailer hitch for my 2013 Traverse. The product was delivered on time. The quality of the product is top notch and the installation was a breeze as guided by the easy to follow instructions. But most of all, the customer service provided by etrailer was amazing. The staff is knowledgeable and go to all lengths to ensure you receive the correct hitch/accesspries for your vehicle. Great product and company and I highly recommend them.
by: David05/10/2023
2011 BuickEnclave
The eTrailer hitch went in like a charm, a quality product at a great price and the support from etrailer is awesome. As a novice, it took a bit longer to install than expected and the plastic cover plate could not be reinstalled to hide the hitch, no worries. The entire experience from purchase to finished install was awesome.
by: Mike04/16/2024
This company was wonderful to work with! No problem with the install or the hitch. Everything was included and lined up perfectly. Fantastic and will order from here again.
by: Garrett04/15/2023
2017 GMC Acadia Limited
I have responded directly to the first person who reached out to me. I will send you the exact same thing, just so you are aware. Thank you.
Thank you for reaching out! As a business owner myself, I feel it would be more beneficial for me to reach out directly rather than writing a displeased review.
I wanted to start with the positives,
•The integrity of the hitch seems to be very well made!
•The timeliness of shipping/handling etc was great. Very expedited and kept me in the loop.
•The install was a breeze and the videos helped tremendously!
The not so good:
I will attach a picture of how the product showed up to my door. I know that 3rd party shipping companies are liable for handling, but the hitch was 1/4 out of the box when it showed up in my driveway. Inside the box, there was no padding, tie downs, etc.
As a result of the hitch being outside of the box, there were multiple scratches/dings. Obviously, the aesthetics do not bother me near as much as knowing that it may rust earlier than the rest of the hitch. One plans on it being shipped, installed, then use. Unfortunately, I had to put a little elbow grease in myself to ensure the integrity of the rust resistant hitch is not compromised.
With that being said, again, I just wanted to let you know directly from a consumer rather than write a bad review online.
by: Gerald09/21/2023
Delivered on the date it was promised, and installed the following day. I have used etrailer.com in the past and will again in the future. The Installation video was critical to being able to get this installed properly. I love that etrailer.com has all the parts you need, and they show you how to install them!
by: Kazoo02/27/2024
Bolted in cleanly and completely hides behind the stock bumper on our '17 Chevy Traverse. I only wish it had a place to mount the connector.
by: Stanislav05/31/2024
Happy with product and installation.
by: Jeff09/09/2019
2012 BuickEnclave
Etrailer does it again! Always timely delivery, always a great fit, and always ways to make putting the hitch on easy. Thanks for the wires to pull the carriage bolts through the frame and the nice instructions (including video for my vehicle type). When I need some hitch parts this is the place. Hitch and wiring purchased for 2012 Buick Enclave.
Jeff
9/10/2020
Great!
by: philip01/14/2021
Submitted the update. Great product, thanks for the followup. I ended up getting a second hitch to go on my wife's SUV so I could move the bike rack over to use on family trips.
Philip
1/16/2022
Working perfectly! My wife was worried that she would have some big ugly hitch on her vehicle, but its completely hidden behind the bumper fascia. Just pop off the access panel when I need the hitch, but otherwise it disappears.
by: Michael 11/06/2023
Easiest trailer hitch I have ever installed. I was a little skeptical of doing it myself. It was easy and was able to use it in no time.
by: Aida08/16/2022
This trailer was perfect for my 2014 GMC Acadia. Customer service was great when purchasing and followed up to make sure shipping was on time.
Aida
8/20/2023
Its been an year and the hitch has been well used. Great product, great fit.
by: Eamonn 05/25/2024
Great product and great service. I couldn’t ask for better.
by: Thomas06/21/2021
2013 BuickEnclave
I ordered this hitch receiver for my 2013 Buick Enclave to be mostly used for carrying multiple mountain bikes. The hitch arrived a few days earlier than expected which was a pleasant surprise. Very fast shipping. I got to installing it right away; the fit was perfect and the installation was...tricky.
I backed my vehicle up onto ramps which gave me plenty of room to work underneath. I removed the rear fascia covering. I sprayed the rubber supports which hold the exhaust in order to lower the dual exhaust pipes. With a bit of "back and forth" on the four supports I was able to release the supports and lower each pipe.
I first installed the two center bolts which went in with no problems. My vehicle does not have existing threaded bolts for the center attachments, so I used the "hook and pull" method as shown in the video to guide the bolts and the locking rectangular supports through the bumper to the existing holes. This was relatively effortless, but it would have helped if the wire guides supplied with the hitch were 12 inches longer. Placing the hitch in its proper position with the help of my daughter, I initially secured the hitch with the center bolts to then attach the four side bolts. Previously, I ordered the suggested nylon brush to clean out the existing threads under my car. I cleaned the threads out as directed in the video but, as it turned out, the cleaning needed to be much more extensive than I realized. After struggling to hand ratchet in the bolts I gave up and left the hitch bolted with only the two center bolts. I watched the video again and I noticed the installer in the video used a battery powered ratchet. Ah hah! To the hardware store I went to buy my own lithium ratchet. I figured it would come in handy to own this tool.
With my brand new ratchet charged and ready I went back to the task at hand. I liberally sprayed WD-40 in the holes and aggressively used the nylon brush on all four threaded holes under the vehicle. Then I eagerly attempted to use the power of the ratchet to finish the job. Well, shoot...the ratchet is too long. I then lowered the spare tire to get to the bolts and use my lithium ratchet. Well, even with my ratchet that has rated torque of 35ft-lbs, it couldn't get past the accumulated filth mucking up the threads, it would stall without cinching the bolts tightly against the washers. So, I then just used the lithium ratchet to pull the bolt "back and forth" (or up and down) which in theory would loosen the compressed and hardened thread blockage, and the bolts should go all the way in snug against the hitch. That worked! Whew. Finally. I then snugged and torqued all six bolts appropriately, buttoned up the exhausts, re-installed the fascia and it looks wonderful. Now I'm ready to go mountain biking again. Yay! Thanks etrailer!
by: EM03/27/2024
2015 Chevrolet Traverse
Great product, very easy to install. My 14 year old son was able to install it on his own with supervision.
Brooke M.
3/27/2024
Just 14? Wow, color me impressed! The most car related work I ever did as a kid was pick my dad up from Dobbs. Do you guys work on lots of projects together?
by: Alfred 05/25/2024
It wasn’t that hard to put on and everything was in the box that I needed to do the job. Thank you very much.
by: William02/24/2022
2014 GMC Acadia
I ordered on Tuesday and the hitch arrived on Thursday morning. I was shocked.
I installed the hitch on my wife's 2014 Acadia with dual exhaust. I did it by myself and did not have to drop the exhaust. It took about an hour, working at a relaxed pace. One of the fish wires gave me a lot of trouble and the other went right in. I did need to grind the rectangular hole to fit the carriage bolt in. I used a drill with a rasp bit. A die grinder or file would work as well. It was very little that needed to be ground down.
The hitch looks great. The original cover fit like it should. The hitch does not impede it at all. I had some black semi gloss Rustoleum in the cabinet and painted all of the bolts.
We plan to use it for a bike rack, initially. Eventually we plan to purchase a small RV (4000 lbs or so), install a wiring kit, a transmission cooler, and a tow switch. I am confident this hitch will do the job.
William
2/25/2023
We have had the hitch on the car for a year now. The hitch has been working out great. We only use it for a bike rack, so far.
by: Jason 02/08/2024
Easy installation. It just took a few minutes to install it.
by: Nicholas 09/08/2023
2015 Chevrolet Traverse
Fit perfectly on our 2015 Chevy Traverse. Have used it several times for a bike rack.
by: Douglas10/25/2022
2013 Chevrolet Traverse
Hitch went on really easy. They sent the wires that you could pull the bolt through the frame. Those are amazing. Hitch just looks good
by: Craig11/28/2020
Everything worked well and only took me about 45 minutes to install not counting watching the video which I did before purchasing. Very solid steel frame. I am primarily using it for bike rack and small trailers. The wire that comes in the kit to pull the carriage bolt and washer through the tube was awesome. I did have to jiggle it a little bit at first to get it to slide through.
by: Christopher06/07/2020
2017 Chevrolet Traverse
Install was very easy even by myself. Definitely had to remove 3 of the exhaust hangers and drop the muffle down onto a jack stand to get access to the bolts on the passenger side but that was not difficult. The fish wires for the center bolts worked great. Only trouble I had was cleaning out the holes on the drivers side. It took a lot of WD40 and an old brush to clean the holes out until I could get hit wbolts to thread all the way in. My wife is very excited to get the bike carrier installed and loaded up. Would definitely recommend this to others.
by: Johnnie 06/05/2024
2013 GMC Acadia
So far so good everything looked packaged well. Fast delivery.
by: Linds04/03/2019
2008 Saturn Outlook
I have a 2008 Saturn Outlook I got the hitch in the mail today. Installed the hitch in less than an hour. When installing the hitch use jack stands to hold up the hitch and the exhaust. And when taking out the exhaust hangers use a lubricating oil, like what it said in the video. If in the future i were to buy another vehicle and it didn't have a hitch i would buy it from etrailer.
25
487
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch
- Recommended 7-Way Wiring Harness for a 2011 Buick Enclave Yes, there is. You will need two separate wiring harness though since your 2011 Enclave does not have the towing package. The first one is the Curt Wiring Harness item # C56027. This harness is custom fit and plugs into existing wiring which is located either behind the driver's-side and passenger's-side tail lights or behind the rear bumper. The second harness you will need is the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The kit includes a pre-wired 7- and...
view full answer... - Proper Set-Up for Towing a Pop-Up Camper with a 2014 Buick Enclave AWDFor your 2014 Buick Enclave, I recommend the etrailer Trailer Hitch Receiver, # e98863. This is a matte black finished Class III hitch with a spec rating of 5,000 lbs. for max GTW or 6,000 when using a WDS. It has a tongue weight rating of 500 lbs. increasing to 600 lbs. when using a WDS. But always refer to your vehicle specific owners manual for the vehicles max specs for towing. It is a custom fit bolt-on model that comes with all needed hardware and lifetime technical support from...
view full answer... - Best Hidden Hitch And Wiring For 2014 GMC AcadiaOur etrailer Trailer Hitch Receiver # e98863 hides behind the plastic cover and is a fairly easy install! I'll include a video to show you how you can install it yourself. The wiring will be just as easy if not easier! Since you do not have the factory tow package, you'll need the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector Item # C56245 . This kit includes the fuses and replays to activate your tow package along with all the wiring you'll...
view full answer... - Can the Fascia Cover Be Re-installed on a 2013 Chevy Traverse When Not Using the Hitch?Yes, it can! For your 2013 Chevrolet Traverse LT, I recommend the etrailer Hitch item # e98863. This hitch is custom fit and bolts to your Chevy with included hardware. This is a class III hitch with a 2" receiver. Once installed it can be completely concealed by the rear fascia cover. I have linked an installation video below to help you get this hitch set up. If you are planning on towing you will also need a wiring harness item # C56245 and a ball mount kit item # C45534.
view full answer... - Will Yakima Skybox NX 16 Clear the Antenna On 2010 GMC Acadia?The Yakima SkyBox NX 16 Roof Cargo Box - 16 cu ft - Black Carbonite # Y95AV requires a hatch clearance of at least 47" in order to open the trunk; hatch clearance is the distance from the center of the front crossbar to the line where the roof meets the trunk. We can apply this to your antenna clearance; if you have at least 47" from the center of the front crossbar to the antenna then it will for sure clear the antenna, otherwise it may interfere. There likely won't be a shorter cargo...
view full answer... - Trailer Hitch, Trailer Wiring Harness and Towing Equipment for 2014 Chevy TraverseFor a Class III hitch that would work great with your 2014 Chevy Traverse, I'd recommend the etrailer brand # e98863. The hitch uses a durable matte finish that tends to blend in with the black trim used on many vehicles, making the hitch less visibly obtrusive as you can see in the linked installation video. To tow with the hitch, you'll also need a trailer wiring harness, the Tekonsha # 118270 which includes the fuses and relays necessary to activate the vehicle's electrical tow package....
view full answer... - Hitch Receiver and Wiring Harness for Electric Chair Lift on a 2017 Chevy TraverseI would be happy to help you find a hitch and wiring harness for your 2017 Chevy Traverse. For your hitch I recommend the etrailer Trailer Hitch Receiver item # e98863. This is a custom fit hitch that bolts directly to your Traverse's frame with included hardware. I have linked an installation video so you can see the process and what the final product will look like once installed. For your wiring harness you will want the Tekonsha T-One Vehicle Wiring Harness for Factory Tow Package...
view full answer... - Comparing Curt and Draw-Tite Trailer Hitch Receivers for 2017 Chevrolet TraverseThe only significant difference between the Draw-Tite # 75528 and the Curt # 13424 is the capacity. Since both of these far exceed the towing capacity of your vehicle that really doesn't make a difference. If I were to recommend a hitch for your 2017 Chevy Traverse it actually wouldn't be either of these. Instead, I would choose the etrailer Trailer Hitch Receiver # e98863. This hitch has the same design and capacity as the Curt. What sets it apart from the other two is the matte black...
view full answer...
- Does Wiring Connector Exist on 2017 Chevy Traverse Even Without Tow PackageYes, the connector to install the Curt T-Connector Vehicle Wiring Harness # C56245 will still be located on your 2017 Chevy Traverse even if you don't have the factory tow package. Basically if you had the factory tow package it would already have that connector PLUS it would already have all of the fuses and relays needed to provide power to your trailer light functions. In addition to the T-Connector I also recommend using mounting brackets # 18144 and # 18140 to keep the 4-Way next...
view full answer...
- Recommended 1 and 7/8 Inch Ball Mount With BallWhen it comes to getting the correct ball mount with a 1=7/8 inch ball i recommend the following parts: The Draw-Tite Ball Mount for 2 inch Hitches - 2-3/4 inch Rise, 4 inch Drop - 9 inch Long - 7.5K # 2753 1-7/8 inch Hitch Ball - 1 inch Diameter x 2-1/8 inch Long Shank - Chrome - 2,000 pounds # 19260 I attached a review video link below.
view full answer... - Trailer Hitch and 4-Way Wiring Confirmed to Fit a 2014 Chevrolet TraverseIt sounds like your 2014 Chevrolet Traverse has a separate wiring system. Since that is the case you need a powered converter module to safeguard the vehicle's wiring and to provide enough power for the trailer lights. The wiring harness you will want to use is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56181 which includes a powered converter. For a trailer hitch, I recommend the etrailer Trailer Hitch Receiver # e98863. This hitch has a bolt-on,...
view full answer... - 7-Way Mounting Bracket for Use with etrailer Hitch on 2015 Chevy TraverseI checked your order notes and it looks like you went with the Curt Easy Mount Bracket # C58000 for the 7-way part # 118271 which will work great with the etrailer.com hitch part # e98863 you have installed on your 2015 Chevy Traverse. I attached a link to an install video for the mounting bracket for you to check out when it's time to install everything as well.
view full answer...
- Trailer Hitch Receiver, 7-Way Wiring and Brake Controller Recommendations For a 2017 Buick Enclave Yes, you are able to install a trailer brake controller on your 2017 Buick Enclave that did not come with the factory tow package. First you will need a Receiver # e98863 to add to your Enclave. Next we have the 7-Way # 118271 which will allow you to plug into the factory harness and includes the fuses and relays you need to activate the harness. This will attach to the receiver using the Mounting Brackets # C57202 and # 18138 so you will not have to drill into your vehicle fascia. I...
view full answer... - Recommended Hitch and Wiring Harness for a 2011 Chevrolet TraverseI would be happy to help you set your 2011 Chevrolet Traverse up for towing. You are going to need a hitch receiver, a couple of wiring harnesses, a brake controller, and a ball mount. Let's start with your hitch receiver I recommend the etrailer Trailer Hitch Receiver item # e98863. This is a custom fit hitch that bolts directly to your Traverse with included hardware. It has a maximum gross trailer weight of 5,000 lbs and maximum tongue weight capacity of 500 lbs. I have linked an installation...
view full answer... - Will Trailer Hitch Receiver From 2013 Chevy Traverse Fit Honda Pilot?The # e98863 is not compatible with a Honda Pilot. It is only compatible with the following: *2007 - 2016 GMC Acadia *2017 - 2017 GMC Acadia Limited *2008 - 2017 Buick Enclave *2007 - 2010 Saturn Outlook *2009 - 2017 Chevrolet Traverse *2018 - 2018 Chevrolet Traverse Limited You may be interested in the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98840 which is a fit for 2016-2020 Honda Pilot models.
view full answer... - Higher Capacity Trailer Hitch for 2011 GMC AcadiaThe etrailer Class III hitch part # e98863 is a really great option for your 2011 GMC Acadia. It has the higher tongue weight capacity of 600 lbs and 6,000 lb trailer towing capacity when used with a weight distribution system and 500 lbs and 5,000 lb without wd. I attached an install video for this for you to check out too.
view full answer... - Trailer Hitch and Wiring Harness and Towing Accessories for 2014 Chevrolet TraverseCertainly, I'd be glad to help with that. In addition to the # e98863 etrailer brand Class III hitch, to complete your towing set-up you'd need the # 118270 wiring harness, which includes the fuses and relays to activate the tow package lighting circuits. You'll also need a ball mount like # C45010 and for a 1-7/8 inch trailer ball, # 19260 or for a 2 inch ball, # 63845.
view full answer... - Most Hidden Trailer Hitch that Fits 2006 GMC Sierra with Roll Pan BumperSounds like you have a roll pan bumper installed on your 2006 GMC Sierra based on what you described which we have hitch fits for like with the etrailer part # e82AR which will fit behind the rear license plate bracket of the roll pan bumper like the picture I attached.
view full answer...
- Is Towing with 2015 Chevy Traverse Safe If Towing Under Weight CapacityAs long as you stay under the towing capacity of any vehicle including your 2015 Chevy Traverse you will be totally safe and not have to worry about any damage in the short term or long term. You'll need a hitch like the # e98863 installed, trailer wiring like part # C56181 and a ball mount kit like # 989900 and you'd be set.
view full answer... - Trailer Hitch and Wiring for 2017 Buick Enclave Towing Cargo TrailerWe have everything you'll need to tow a small cargo trailer with your 2017 Buick Enclave. The first thing you need is a hitch like the etrailer # e98863 which has the 5,000 lb trailer weight capacity you are wanting and is also hidden behind the rear bumper cover when not in use. Then for trailer wiring the Tekonsha kit part # 118270 is the best option as it installs easily and is very reliable. I attached an install video for this and the hitch for you to check out as well. Since you...
view full answer... - How Much Can a 2016 GMC Acadia TowThe towing capacity of a 2016 GMC Acadia is 2,000 lbs for models without the factory trailer towing package (V92 Trailer Towing Package) and 5,200 lbs for models with the factory trailer tow package (V92 Trailer Towing Package). If you don't have the factory trailer towing package but still need to tow a trailer, you can do so with a trailer hitch the etrailer Trailer Hitch Receiver part # e98863 and a wiring harness the T-One Vehicle Wiring Harness part # 118271. Furthermore, if the...
view full answer... - Towing Capacity of 2012 GMC Acadia DenaliI looked up the towing capacity of your 2012 GMC Acadia Denali and it looks to be 5,200 lbs. If you need a trailer hitch we have the etrailer.com hitch part # e98863 and for wiring part # C56056. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If...
view full answer... - Recommended Hitch and Towing Set Up for a 2015 Chevy TraverseI would be happy to help you set your 2015 Chevy Traverse up for towing. For a hitch you will want the etrailer trailer hitch item # e98863. This hitch is custom fit and bolts directly to your Traverse with included hardware. It has a clean post install look that has the receiver sitting behind your rear bumper and not hanging down below your vehicle. To control your trailer's brakes you will need a 7-way connector. If your Traverse has the factory tow package all you will need is the...
view full answer... - Parts Needed to Tow Trailer with 2015 Buick EnclaveWe do have all of the parts you're going to need, so never fear! For a hitch I recommend using the etrailer # e98863, which has a nice, durable powder coating that will hold up to the rigors of towing. This is a custom fit hitch so there's no need for drilling to install. You'll also need a wiring harness, so I recommend using the Tekonsha # 118271, which will give you the 7 way plug you need to tow your trailer with brakes. For a brake controller I recommend using the Tekonsha Prodigy...
view full answer...
Do you have a question about this Trailer Hitch?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Updated by:
Wilson B
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Bradley B
Video by:
Jonathan Y
Video by:
Michael B
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Scott
7/20/2023
Awesome. Perfect fit for my vehicle.