Single Axle Trailer Fender for Enclosed Trailers - Cold Rolled Steel - 8" Wheels - Qty 1
(2480 reviews)
Price: $19.21
In Stock
Single Axle Trailer Fender for Enclosed Trailers - Cold Rolled Steel - 8" Wheels - Qty 1
Item # HP39VR
Our Price: $19.21
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (2480)
- Q & A (0)
- Videos (1)
- Photos
etrailer Trailer Fenders - HP39VR
- 8 Inch Wheels
- For Single-Axle Trailers
- Steel
- 19-1/2 Inch Long
- Bolt-On
- Weld-On
- 5-1/2 Inch Wide
- No Step
- etrailer
5-1/2" Wide x 19-1/2" long x 5-1/4" tall. This sturdy, rounded fender has a flat back to mount flush with your enclosed trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.
Features:
- Rounded fender covers 1 tire on your single-axle trailer
- Blocks road debris from hitting other vehicles and helps protect your trailer's cargo
- Flat mounting flange on inner edge lets you mount fender flush with your enclosed trailer
- Close fit keeps dirt from building up between the fender and trailer
- 1" Wide outer edge is rounded
- Sturdy, 16-gauge, cold-rolled steel construction
- Prime and paint the fender to get corrosion protection and to match your trailer's finish
- Weld-on or bolt-on installation
- Requires drilling and purchase of mounting brackets (sold separately) for bolt-on installation
- Made in the USA
Specs:
- Application: single-axle trailers with 8" diameter wheels
- Dimensions: 19-1/2" long x 5-1/2" wide x 5-1/4" tall
- Quantity: 1 fender
- Weight: 9 lbs
- 1-Year limited warranty
Tips for Replacing and Installing Trailer Fenders
- Do your best to match the dimensions of the new fender to your old one.
- If a fender was damaged during a blowout, use the opposite fender to get the dimensions.
- As with all trailer maintenance, don't forget to chock your wheels before getting started.
- For a bolt-on fender, use your existing mounting hardware, if possible.
- The old mounting bolts or screws might be stripped or rusted, in which case you'll need to tap them out and buy new hardware.
- If removing an old, welded-on fender, either carefully chisel it off yourself or take your trailer to a weld shop to have the fender professionally removed.
- Don't forget to prime and paint the new fender to keep it from rusting (and to match your trailer's finish).
- Before you start drilling, position the fender where you need it and center it over your wheel well.
- Mark where you need to drill (measure twice, drill once).
- Don't tighten down the mounting hardware completely until you're sure the fender is mounted correctly.
MFS00006 Single Axle Trailer Fender - 90-Degree Back - Cold Rolled Steel - 8" Wheels - Quantity 1
Replaces F55X1925-1R
Video of Single Axle Trailer Fender for Enclosed Trailers - Cold Rolled Steel - 8" Wheels - Qty 1
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of etrailer Trailer Fenders - Single Axle Fender - HP39VR
Jeff: Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this etrailer Single Axle Steel Trailer Fender for eight inch wheels, for a quantity of one fender.Now, this rounded fender will cover one tire on your single axle trailer. This does act as a splash guard, keeps any road debris from hitting other vehicles and it'll help protect your trailer's cargo. Now, I wanted to zoom in and just show you the outer edge on this. Right here, you can see has a nice one-inch curve radius to it.
Gives a clean finished look and, on the inner edge, if you notice, it does have a 90 degree lip on it. And the reason they do that is it allows it to mount flush with your enclosed trailer.Now, this is a nice sturdy 16 gauge cold rolled steel construction. Nice raw finish. Now, this can be primed and then painted to provide even more resistance to corrosion and to match your trailer's paint finish.Now, this is a weld on or bolt on installation. It's not pre drilled.
The mounting brackets for a bolt on installation are sold separately. This part is made in the USA. A few specs on this. It is for one fender and the application is for single axle trailers with eight inch diameter wheels. The weight on this is only about three pounds.And the last thing we'll do is just zoom in and give you some measurements.
So, we're going to do the length from here to here. If we take our tape measure, it's going to be right at 19 and a half inches long. Overall height on this, it's going to be right at five and a quarter inches tall. And the overall width on it, is right at five and a half inches wide.But that should do it for the review on this etrailer Single Axle Steel Trailer Fender for eight inch wheels, for a quantity of one.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Single Axle Trailer Fender for Enclosed Trailers - Cold Rolled Steel - 8" Wheels - Qty 1 - HP39VR
Average Customer Rating: 4.8 out of 5 stars (2479 Customer Reviews)
5-1/2" Wide x 19-1/2" long x 5-1/4" tall. This sturdy, rounded fender has a flat back to mount flush with your enclosed trailer. 16-Gauge, cold-rolled steel is durable. Bolt or weld onto your trailer.by: Terry 09/28/2023
Very happy with the fit & easy to drill a few holes. GREAT price! Checked @ a local store & they wanted the same price for 1 fender & it had rust on surface new! Got mirror extenders off this company before & every thing has been good.
by: James06/15/2023
Bought these for my new log splitter they worked great just need pain now . Good product and really good service
by: Pete07/04/2019
Solid well made steel fenders
by: Ryan04/21/2016
Simple product that does the job. Easy to weld, easy to paint.
by: Curtis02/13/2024
by: Linford03/29/2024
by: al e02/11/2011
i thought they came in pairs,but they dont.so when you order ODER 2 !
by: Ramon 09/30/2023
by: Stanley 01/23/2023
by: James 05/04/2023
by: Walter 02/02/2023
by: Michelle 11/07/2022
by: David 01/14/2023
by: Alex07/10/2022
by: Bob 09/20/2021
by: al e02/05/2011
looks great
by: Donald05/29/2023
Very well made. I added some more bar tacks to bond the backing plate to the fender. It probably would have been fine as is, but for three minutes of effort I know that the two won't separate. I built a T out of 1" tubular steel to mount it to the trailer and there is no flex, once I welded it all together. Arrived clean enough to paint (but I still wiped it down with isopropyl alchohol before painting).Nice heavy gauge fender.
by: JO12/30/2022
I used these steel fenders to replace aluminum fenders on my utility trailer after one had fallen off along the road somewhere. Prior to installing these I painted them with Krylon Fusion gloss hammered metal spray paint, which has held up well.
by: Fredrick02/24/2024
These fenders were to replace the rusting out fenders on my Four Winns boat trailer. They really spruced it up! The only "modification" I had to do was add an extra 3/8 nut on both sides between the fender and the trailer frame to make it fit. I used all new stainless steel fasteners.
by: Joey03/13/2024
Great looking and functioning fenders. Really thought I would never find fenders for a 1993 boat mate trailer that would fit but these fenders fit great. Sure made my trailer look better.
by: Ryan R08/02/2023
I put two of these fenders on my canoe trailer. Both broke before I'd gone 1,000 miles.
by: Stephen01/13/2024
This is an exact replacement for another product that I previously purchased with a back plate for my father's homemade boat trailer. I lost the fender on a long haul of his boat, but not the back plate. I was able to bolt on the original back plate. I am completely satisfied with this product.
by: Matthew10/27/2023
Two new fenders worked out fine. I had replaced the original new fenders on my trailer that I didn't like. I made and welded on my own inner fender out of 16ga material and 11ga floor plate for steps/gussets.
by: Steven 04/26/2024
I looked at pretty much every source for purchasing utility trailer fenders in the size range needed. My concerns were tire coverage and fit on a 4x5 trailer. The rounded fenders are far more common than the Jeep style, I found. In the end, these were the best price and concurrently the best gauge of steel - weldable. They look solid. No issues once I laid eyes on the fenders.
by: Stanley02/10/2024
I purchased a setof Single axle trailer fenders for my utility trailer about a year agl. etrailer provided good measurements that I thought would fit the existing mounting brackets and I was happy to see that they were a perfect fit. I cleaned and painted the fenders before I mounted them and after a year they still look great. I am quite pleased with the purchase and the information provided by etrailer.
25
2471
Show More Reviews
See what our Experts say about this etrailer Trailer Fenders
- Replacement Fender Options for Choi Lee TrailerThe closest thing we have to an 18" long fender is the Single Axle Trailer Fender # HP39VR which is 19-1/2" long. The full dimensions are 19-1/2" long x 5-1/2" wide x 5-1/4" tall so it falls a little short on the width. If you're ok with a plastic fender you could also use the Fulton Single Axle Trailer Fender # F008550. This is 7" wide x 20-1/4" long x 6-1/4" tall. Without an exact match all you can do is try to get the dimensions as close as possible on new fenders.
view full answer...
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.