Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
7" Wide x 20" long x 6" tall. Excellent for your boat trailer, this aluminum, PVC-coated trailer fender can stand up to rust, corrosion, and scratches. Easily bolt fender onto your trailer.
Features:
Specs:
Rustproof Aluminum Construction
Aluminum offers excellent, long-term defense against rust and corrosion. It is naturally rustproof, unlike steel, which must be treated with a rust-resistant coating that can break down over time. Aluminum is lightweight yet durable, making it suitable for heavy-duty, outdoor, and saltwater applications.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everyone. I'm Ellen here at etrailer.com. We're going to be taking a quick look at the single-axle trailer fender. This protects your trailer and any cargo that you have in it from any rocks getting kicked up and debris getting slung onto that cargo. It also helps keep mud and water from spraying up also onto your trailer. It's going to be a nice diamond-plate design.
It gives it a rugged look. This is also made out of aluminum, so it should last for a long time and be very corrosion resistant.You can see that nice rugged diamond plate going all across the surface. This has a beveled design, or it has a radius on either side, so you will need to have some brackets to mount this in place. It does not come with any brackets, so you will need to purchase those separately. As far as the size of our fender, we go from edge to edge, it's about 20 inches long that over.
So you can see that 20 inches long going from outer edge to outer edge, and then seven inches wide and about six inches tall. It does just come as a single fender. You can use this on either side. It is covered by a one-year limited warranty, and it is made in the USA.That's about all there is to it for our look at the single axle trailer fender in diamond-plate aluminum. I hope this has been helpful in deciding if this is the right fender for you.
We do have a lot of other options available, though, here at etrailer.com, so check them out. Thanks for watching.
Average Customer Rating: 4.8 out of 5 stars (2479 Customer Reviews)
7" Wide x 20" long x 6" tall. Excellent for your boat trailer, this aluminum, PVC-coated trailer fender can stand up to rust, corrosion, and scratches. Easily bolt fender onto your trailer.These Trailer Fenders are a quality product which are "rust free". It's hard to find an 8" rust free wheel fender on-line. All stainless steel fenders listed on line require you to paint them so they will not rust. This is because since they were stamped/pressed via large machine press at the manufacturing plant, using a flat sheet of stainless steel. When the sheet is pressed it's damaged and will rust.
It was the full set of dimensions in the description that sold me as to what I needed. The steel fenders were short on finished dimension size.
Perfect fit.
Worked well replacing my plastic fenders
Super fast delivery and products were described perfectly
Very well made. I added some more bar tacks to bond the backing plate to the fender. It probably would have been fine as is, but for three minutes of effort I know that the two won't separate. I built a T out of 1" tubular steel to mount it to the trailer and there is no flex, once I welded it all together. Arrived clean enough to paint (but I still wiped it down with isopropyl alchohol before painting).Nice heavy gauge fender.
I used these steel fenders to replace aluminum fenders on my utility trailer after one had fallen off along the road somewhere. Prior to installing these I painted them with Krylon Fusion gloss hammered metal spray paint, which has held up well.
Great looking and functioning fenders. Really thought I would never find fenders for a 1993 boat mate trailer that would fit but these fenders fit great. Sure made my trailer look better.
These fenders were to replace the rusting out fenders on my Four Winns boat trailer. They really spruced it up! The only "modification" I had to do was add an extra 3/8 nut on both sides between the fender and the trailer frame to make it fit. I used all new stainless steel fasteners.
I put two of these fenders on my canoe trailer. Both broke before I'd gone 1,000 miles.
This is an exact replacement for another product that I previously purchased with a back plate for my father's homemade boat trailer. I lost the fender on a long haul of his boat, but not the back plate. I was able to bolt on the original back plate. I am completely satisfied with this product.
Two new fenders worked out fine. I had replaced the original new fenders on my trailer that I didn't like. I made and welded on my own inner fender out of 16ga material and 11ga floor plate for steps/gussets.
I looked at pretty much every source for purchasing utility trailer fenders in the size range needed. My concerns were tire coverage and fit on a 4x5 trailer. The rounded fenders are far more common than the Jeep style, I found. In the end, these were the best price and concurrently the best gauge of steel - weldable. They look solid. No issues once I laid eyes on the fenders.
Item arrived quickly, well packaged and in perfect shape! Worked perfect for my jetski trailer.
I purchased a setof Single axle trailer fenders for my utility trailer about a year agl. etrailer provided good measurements that I thought would fit the existing mounting brackets and I was happy to see that they were a perfect fit. I cleaned and painted the fenders before I mounted them and after a year they still look great. I am quite pleased with the purchase and the information provided by etrailer.
Worked great. snug but fits 275/75/r18 (~33in) tires so I can match my tow vehicle. overlanding trailer build. Originally done in exterior black semi gloss. After chipping following 3k mi swapped coating to primer + two coats of truck bed liner which has adhered really well. Durable. When well supported they can work as a step for me. I did mod them to bring them down in width to form better for my application (would have been too wide, extending 3in past the tire). Responded well to being trimmed. Applied typical rubber-coated 1/8in edge trim to cut side where that met the trailer wall. While not precisely the right item for my unique/custom application, its durability and workability to fit my project was great.
I welded and bolted it with mounting brackets on my tow dolly. I painted it with a primer and then a glossy black. Added tail lights and front markers. Good solid fender
Quick delivery. Solid metal fender. Easy install with screws or could use L brackets. Great value for price.
I’m very satisfied with the overall outcome of ordering my trailer fenders from the online order process to there timely delivery. Of most importance was the quality of the fenders. They were made of heavy gauge sturdy steel. I’ve been closed some photos showing the final product after painting. I would definitely order again if necessary. Thanks trailer.
Was told order would arrive last Friday. It partially did. Called and was told other fender would be shipped out of another location and would arrive by Tuesday. The first one came smooth, the second ribbed. Need this resolved so I have a match.
I really like the ribbed striations in the fender when I saw it in person. They add a little style to the part and they also add a little strength. I think they'll look very good when painted.
Four stars only because the fenders will need a little attention. The very ends need a little a few minutes of work to flatten them completely. That's a natural problem with rolled steel parts and it's easy enough to fix with a block of wood and a small hammer.
Most people wouldn't bother with this or might not consider it to be a problem at all but I'll square up the ends in just a few minutes before they get installed and painted.
The edges are sharp too. Again, a few minutes to dress them with a sander will get the sharp ends smoothed up. I've never seem a steel trailer fender that didn't need these two touch up items.
They're nice fenders but they aren't quite ready to paint as far as I'm concerned.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jerry
5/9/2024
Its been over a year now and Im 100 happy with this product. Trust me, this size fender is hard to find via true stainless steel this product will never rust.