Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle

See what our Experts say about this Timken Trailer Bearings Races Seals Caps

• Determining Bearings For 2021 Rice Car Trailer
  Hello Jeffrey, While I'm sure we have a bearing kit for your car trailer, we don't have any way of knowing off-hand or cross-referencing what bearings you need. You mentioned you have them out, so you should be able to see the part number stamped directly on them, and you can use that as a guide for what to get. For example, if you have bearings L68149 and L44649 you would use the 3,500 lb Timken Bearing Kit # TMK52VR I have added a link below to our entire selection of bearing kits...
  view full answer...
• Bearing Kits that Could Fit 2021 Keystone Cougar 22MLSWE
  If your 2021 Keystone Cougar 22MLSWE had 2,000 lb axles the part # TMK54ZR would be correct for it but I do not believe that is what you'd need although I was not able to verify the axle capacity of the trailer. A more likely axle capacity you have is 3,500 and the correct kit would be the part # TMK52VR.
  view full answer...
• Replacement Bearings, Seals, Hubs For 2021 Riverside Retro 135 With 3,500 lb Axle
  Hey Rob; thanks for the photos and it was actually the one with the hub number that did it. That's a BD 545 which is an AxleTek 3,500 lb hub and drum like the Trailer Hub and Drum Assembly # AKHD-545-35-K. The 35 on the axle sticker was a good indicator it was a 3,500 lb axle, but the hub number verified it. So you can use that hub and drum, and for a bearing kit use Hub Bearing Kit # BK2-100 or for Timken parts the Timken Bearing Kit # TMK52VR. Both kits come with the bearings, races,...
  view full answer...
• Bearing Kits For Lippert 3,500LB Trailer Axles
  You are going to want either our Bearing Kit # BK2-100 or the Timken Kit # TMK52VR. Both of these kits will give you the inner/outer bearings and races along with a grease seal and cotter pin/D-washer for one hub. You always want to replace the race when you replace the bearing since they ride on the race and will prematurely wear your bearings if they are even slightly distorted from the previous bearing set. Here is a list of tools you may need if you are doing the work yourself. Race...
  view full answer...
• USA Made Bearing Kit For An AL-KO 4,400 lb Axle
  The ALKO 4,400 lb axles use the same bearing sizes as the standard 3,500 lb alxes. If you want USA made bearings, I recommend the Bearing Kit # TMK52VR. This kit comes with the Timken brand bearings which are all made here in the USA.
  view full answer...
• Timken Bearing Kit Fitment for a 3,500 lb Axle
  Yes, the Timken Bearing Kit # TMK52VR will fit your 3,500 lb axle as it fits an standard #84 spindle. The only time this kit won't fit with a 3,500 lb axle is if the trailer/axle is made before the 2000's since that's about the time that axle parts started to become standardized.
  view full answer...
• Can Bearings Be Packed with Grease From Small Side
  As long as you're seeing grease pushing out the larger end of your Timken Bearing Kit # TMK52VR when you pack the bearings you'll be good to go! We typically go from the larger end just because it's easier to pack the bearings that way, but the main thing is making sure the bearing is full of grease for the best trailering experience. If you have any other questions about bearings please feel free to reach out, William!
  view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?