Replacement Bearings, Seals, Hubs For 2021 Riverside Retro 135 With 3,500 lb Axle
Question:
Hi, Im trying to identify an axle on a 2021 Riverside Retro 135 camper. There is a sticker which I can send a photo of with what looks like a model number 35-SB-82-64-33836. There is also a serial number but since I dont know the manufacturer I cant use a lookup site. On the outside of the brake hubs there is a marking of Axle Teknology but I cant find any information on that manufacturer. Im hoping you can help me identify the manufacturer so I can get the specs for any parts Ill need along the way. I can send a picture of the label and/or brake hubs when you respond if that helps. Thanks, Rob
asked by: Rob M
Expert Reply:
Hey Rob; thanks for the photos and it was actually the one with the hub number that did it. That's a BD 545 which is an AxleTek 3,500 lb hub and drum like the Trailer Hub and Drum Assembly # AKHD-545-35-K.
The 35 on the axle sticker was a good indicator it was a 3,500 lb axle, but the hub number verified it. So you can use that hub and drum, and for a bearing kit use Hub Bearing Kit # BK2-100 or for Timken parts the Timken Bearing Kit # TMK52VR.
Both kits come with the bearings, races, and seal needed for one hub (so for both hubs you would need two kits).
(click to enlarge)
(click to enlarge)
Products Referenced in This Question
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Bearing Kits
- Standard Bearings
- Bearing L44649 and L68149
- Race L68111 and L44610
- Timken
more information >
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Video: TruRyde Bearing Kit for #84 Spindle Installation
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Wire Loom 1/4" Diameter, 10' Long
- Shop: Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber Lens
- Shop: Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Shop: Timken Replacement Trailer Wheel Bearing - L44649
- Shop: Kodiak XL ProLube Oil Bath Hub Body and Cap - 1.98"
- Article: Most Popular Wheel Bearings
- Q&A: Need a Grease Seal With Inner Diameter of 1.845 Inches and Outer Diameter of 2.442 Inches
- Q&A: Installing Suspension Kit By Jacking and Supporting One Side of Trailer at a Time
- Q&A: Distance Between Axles When Using Dexter Equalizer Kit # K71-359-00
- Q&A: How to Pick Out Replacement Trailer Bearings for EZ Loader Boat Trailer
- Q&A: How to Determine if Dexter Heavy-Duty Suspension Kit Will Fit Suspension on 2003 Carson Trailer
- Q&A: Bearing, Race and Grease Seal Kit for 3500 lb Axle
- Search Results: dexter equalizer upgrade kit
- Search Results: dexter equalizer
Rob
3/5/2024
Thanks Kyle! I also received a response from Riverside RV in which they told me the axles were manufactured by Liberty Wheel End LLC. The part number is 35-SB-82-64, D3500 HF=82 5-4.5 SC=64 US Leaf Spring. As far as I can tell these are not available to the general public if they are even made anymore. -Rob