Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness

See what our Experts say about this Peterson Flat Tow Wiring Harness

• How To Use 7 Way RV Connector To Power Lights And Charge Battery On Towed Vehicle
  I highly recommend installing Hopkins Endurance Multi-Tow Adapter # HM48470. This replaces your RV's 7 way and gives you a 7 way AND 4 way flat connection. Then you can hook upMagnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness # PE26UR directly to the 4 way flat provided on the adapter. These tow lights have a 20 foot long wiring harness; use 48" Long 4-Pole # HM47115 if you need 4 more feet of wiring. For the charge line going to the towed vehicle's battery, you...
  view full answer...
  
• Correct Base Plates and Other Parts Needed To Flat Tow a 2013 Mini Roadster
  The correct Blue Ox Base Plate Kit for a 2013 Mini Roadster is part # BX1307. I understand you are hoping to save some cash and make the Blue Ox Base Plate Kit part # BX1303 work but that is really just not feasible as these base plate kits are custom fit to exact vehicles. The mounting flanges are in entirely different spots so I can only imagine the amount of modifications needed would far exceed the value of cutting cost. That said, I don't have any tips for this process as this is just...
  view full answer...
• Are Additional Lights Required on Towed Vehicle When Using a Tow Dolly
  Generally, you don't need additional lighting when using a tow dolly that already has lights. However, it's not a bad idea to check with the local laws in the states you'll be traveling in and in Canada. Some people like to add additional lights just to make it easier to see the vehicle that's on the dolly. If you wish to add lights, you'll need to splice in a tow light kit, like # PE26UR, because the trailer connector on the back of your RV will already be in use with the dolly. Unless...
  view full answer...
• Trailer Hitch Wiring And Tail Light Kit For A 2014 Toyota Highlander
  For your 2014 Toyota Highlander, I recommend the -Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # 56042. This harness will simply plug into your OEM factory harness for your 2014 Highlander. Since you also mentioned you wanted to install lights for your bike rack, the -Magnetic Tow Lights # PE26UR will work great since it has a magnetic base it will stick to any metallic surface. Additional, these lights will plug into the 4-flat # 56042 wiring harness mentioned earlier,...
  view full answer...
• Can a 2013 Honda Fit Be Flat Towed
  I have a copy of the 2013 Honda Fit Owners Manual that I found online, and it states that both manual and automatic transmission equipped Fit models can indeed be towed behind a motorhome IF the specific procedures shown are followed. You can find this information by doing a Google search on '2013 Honda Fit Owners Manual'. Be sure to read the instructions carefully and completely, as they're pretty specific and if they aren't followed to the letter, you can damage the drivetrain of your...
  view full answer...
• Recommended Tail Light Solution To Attach To A Cargo Net
  While there is not an option like what you're looking for, I do have another solution. Take a look at the: -Curt Auxiliary LED Indicator Lights # C53201. These lights measure 7" long and will utilize the same 4-pin style like # PE26UR that you're looking at. These lights are not magnetic, however with the shape of the lights being a bar you could easily use some zip ties # DW05724-10 to secure it to your cargo net. If you wanted a more permanent mounting option, that is also available...
  view full answer...
• Will SMI Delta Force Portable Braking System Work on 2019 Honda Fit
  Yes, the Blue Ox Patriot item # BLU37TR will work perfectly on your 2019 Honda Fit. You will also need the # RM-88400. Whether or not a system like this will actually activate the brake lights when pressing down on the pedal depends on the specific vehicle it's being used on (how the tail lights function when in the correct mode for towing). Based on my research though the brake lights for your 2019 Honda Fit should indeed still illuminate when the Patriot 3 applies the brakes. This...
  view full answer...
• Magnetic Tow Light Kit that Uses 7-Way Connection to Tow Vehicle
  For a magnetic tow light kit that would use a 7-way you'd want the Peterson kit part # PE26UR with the 7-way adapter # HM47365 which you'd plug into the 4-way of the light kit which would then plug into the 7-way of your tow vehicle.
  view full answer...
• Using Peterson Tow Light Kit, # PE26UR, with a Tow Dolly Already Connected to RV Trailer Connector
  The Roadmaster Tow Dolly with electric brakes, # RM-2050-1, also already has lights on it which is why they did not provide an additional socket for lights. It also has a 4-Way flat trailer connector with extra blue wire for the electric brakes and not a 7-Way. Since your RV has a 7-Way, what I recommend is to change the connector on the tow dolly to a 7-Way, # PK12706, and then you can use the Hopkins mutli-tow adapter, # HM47570. This connector will allow you to plug in the 4-Way on...
  view full answer...
• Will Magnetic Tow Lights Work With Chrysler Town And Country Minivan
  The Peterson Magnetic Tow Lights, part # PE26UR are led lights and have a 20 ft long cord that has a 4-way trailer connector. These lights are designed to work with any towed vehicle, and you use the magnetic bases to attach these lights.
  view full answer...
• Recommended Lights For Signaling With Bikes Blocking Tail Lights On A 2014 Kia Sorento
  Since you're trying to display your braking and turn signals utilizing your 4-pole connector your best bet is to use a simple magnetic tow light like the Peterson Magnetic Tow Lights # PE26UR. Since your 2014 Kia Sorento is a crossover SUV the magnetic lights will be high enough above the bikes to display. These are a very simple install; the lights have magnets to stick to your vehicle's roof and come with a 4-pole connector cable to make installation take less than a minute. We also carry...
  view full answer...
• Are Lights Required At Night For The MaxxTow Wheelchair Carrier In California?
  I have found a couple California Laws regarding lights on trailers/accessories. 24600: During darkness, every trailer shall be equipped with taillights, stoplamps (24603) license plate light (24601) and turn signal lamps (24950). 24604: Whenever the load or trailer projects more than 4 feet behind the tow vehicle or obstructs the taillights, the projection must be equipped with taillamps. (magnetic lights are OK 24605) That being said, The MaxxTow Wheelchair Carrier MT70106 sticks...
  view full answer...
• Will Peterson Tow Light Kit Fit At Top Of Rear Hatch On 2015 Subaru Outback Being Towed
  The Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness # PE26UR should work well for you. The TPeterson lights should securely attach to the top of your car with the strong magnets. This would put the lights above the bikes you are carrying as you want.
  view full answer...
• Can a 2011 Ford Fiesta Automatic be Flat Towed Behind a Motor Home
  I did some checking and it looks like a 2011 Ford Fiesta with an automatic transmission is good to tow as is. However, you should check with the owners manual to check for any limitations or recommendations. You will need a few things to accomplish this, the first thing being a Roadmaster EZ2 Base Plate Kit, part # 524425-1. This will install onto your Fiesta and be the attachment point from the tow bars. Next, you will need a RoadMaster Sterling All Terrain Tow Bar, part # RM-576 and...
  view full answer...
• Magnetic Tow Lights Stay on When Connected to 4-Pole Connector on Tow Vehicle
  It sounds like you have already been doing some troubleshooting which helps to narrow down the possibilities for us. What I recommend doing is testing both sets of lights with another vehicle. Even though it is unlikely that 2 sets of magnetic lights would be malfunctioning the exact same way at the same time, it is not impossible. You can verify that the lights are working properly by performing this test. If they need to be replaced, we have the Peterson Magnetic Tow Lights # PE26UR...
  view full answer...
• Parts Needed to Flat Tow 2017 Honda HR-V Behind Class C Motorhome
  We can help you equip your 2017 Honda HRV for flat towing behind your motorhome, and there are a number of different parts you will need in order to do this. For base plates I recommend the Roadmaster EZ5 kit # RM-521570-5 that you referenced. This bracket will accommodate any Roadmaster motorhome-mounted tow bar. I recommend their Falcon 2 tow bar # RM-520. For safety cables use # RM-643. For a lighting kit I suggest an inexpensive magnetic light kit like # PE26UR or # TL21RK; these...
  view full answer...
• Parts Needed to Tow a 2013 Kia Optima on a Tow Dolly
  I checked the online manual for your 2013 Kia Optima and didn't see anything about recreational dolly towing, only emergency dolly towing. While the manual didn't give any distance restrictions for dolly towing it is always best to confirm whether it is safe or not with a Kia dealer. If it is okay then you simply need a tow dolly and then some lights. Tow dollies tend to have lights on them but it helps to have some extra lights to make sure people around you can tell what you are doing. For...
  view full answer...
• Parts Needed to Flat Tow a 2014 Hyundai Accent
  I did some checking and it looks like the 2014 Hyundai Accent is only flat towable if it is the manual transmission model. The 2014 Honda Fit can be flat towed with either transmission style but it is not recommended to exceed 65 miles per hour. I would recommend consulting the owners manual of either vehicle or contacting a dealership to be sure. We only carry base plate kits for the Hyundai Accent though. So that might be the deciding factor. If you were to get a manual transmission...
  view full answer...
• No Splice Flat Tow Wiring Solution Recommended for 2019 Jeep Cherokee
  I do have a wiring solution that won't require you to cut or splice into your Jeep's electrical system, however, there isn't a plug and play harness that will allow you to use your Jeep's taillights. Your best option is to go with a set of magnetic lights, like part # PE26UR. This light kit simply plugs into your existing 4-Pole Flat trailer connector and can be easily mounted to any metal surface on your 2019 Jeep Cherokee Overland. Keep in mind that even if you were to use a hardwire...
  view full answer...
• Parts Needed to Flat Tow a 2013 Honda Fit Sport Automatic Behind a Motor Home
  The best place to check to see if a vehicle can be flat towed behind a motor home is the owners manual. I found one online for the 2013 Fit from Honda and it states that you can tow the vehicle behind a motor home. There are special instructions for the automatic transmission you will want to look at so be sure to check your owners manual. You will need 5 items to flat tow your fit. First you will need base plates, # BX2253. These provide a safe mounting location for a tow bar. For a compatible...
  view full answer...
• Which Style of Tow Bar Lighting is Easiest to Install and Use
  When flat towing a vehicle magnetic tow lights like the Peterson kit part # PE26UR really are the easiest solution to deal with. It's just a matter of plugging them in and setting them on a metal surface that's visible and you are good to go. I attached an install video for these for you to check out as well.
  view full answer...
• Installing MaxxTow # MT70097 Magnetic Mount Tow Lights Permanently on Vehicle
  The Peterson # PE26UR Magnetic Tow Lights could be modified by doing some cutting and splicing to work as you describe. You would attach the connector of the wiring harness at the front of the vehicle and run the wiring under the vehicle. Following the frame member or an existing wiring harness works best. Run the wires to the rear of the vehicle, being sure to avoid any suspension and steering components that might move or anything hot like the exhaust system. Under the vehicle at the...
  view full answer...
  
• Can a 2013 Honda Fit with Automatic Transmission Be Flat Towed
  I did some checking and it looks like your 2013 Honda Fit with an automatic transmission can be flat towed as long as you keep it under 65 mph. I would recommend you consult your owners manual as well to confirm this. For a base plate kit you would want the part # 521190-1 which is a confirmed for your vehicle. In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible...
  view full answer...
• Recommendation for a Towing a 2015 Honda Fit with CVT Transmission
  I did some checking and it looks like the CVT transmission 2015 Honda Fits aren't recommended for flat towing with all 4 wheels down on the ground. You can check with your local Honda dealer or the owners manual for more info on this. A tow dolly like the Roadmaster Tow Dolly part # RM-2050-1 would work well.
  view full answer...

Do you have a question about this Flat Tow Wiring Harnes?