Roadmaster 6-Diode Universal Wiring Kit for Towed Vehicles with Separate Lighting
Item # 154-792-118158
Our Price: $192.60
Confirmed to Fit
2010 Dodge Grand Caravan
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (55)
- Q & A (0)
- Photos
2010 Dodge Grand Caravan - Roadmaster 6-Diode Universal Wiring Kit for Towed Vehicles with Separate Lighting
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
Connect your towed car's lighting system to your RV's to get the brake lights and turn signals required for towing. Designed for use with Dodge Grand Caravans that have separate brake and turn signals. 4-Pole flat loop and wiring converter included.
Features:
- Connects your RV's tail, brake and turn signal lights to your towed vehicle's lighting system
- Designed for use on towed vehicles that have a 3-wire system (separate brake and turn signals)
- Prevents electrical feedback and the damage it can cause to your towed car's electrical components
- Includes tail light converter to adapt your RV's 2-wire system (combined brake and turn signals) to work with the towed car's 3-wire system
- Contains everything you need to wire your car for flat towing
- 6 Hy-Power diodes
- Tail light converter
- 30' Long strand of 4-wire electrical cord
- 6' Long cord with 4-way flat connectors - both vehicle and RV ends
- Ring terminal and wire connectors
- 3' Long split-wire loom
- Limited Lifetime Warranty
Specs:
- Max amperage: 85 amps
- Max voltage: 24 V
Note: If your RV has separate brake and turn signal lights, you do not need to install the included tail light converter. However, you will need to replace the 4-way vehicle-side connector with one that is capable of carrying the separate signals.
The diagram below shows the installation of the 6-diode tail light wiring kit on a towed vehicle (or dinghy) that has separate turn signals (typically amber) and red brake lights. This kit will most often be used with a motor home that operates off of a 2-wire system wherein the brake lights do the flashing for the turn signals. The included tail light converter (118158) is used to convert the combined brake and turn signal lights to separate ones to match those of your towed vehicle.
154 and 792 Roadmaster Universal Wiring Kit with 6 Hy-Power Diodes and 118158 Tow Ready Tail Light Converter
Installation Details
Customer Satisfaction Score:
87% were satisfied with this product
13% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
- Did not fit
Customer Reviews
Roadmaster 6-Diode Universal Wiring Kit for Towed Vehicles with Separate Lighting - 154-792-118158
Average Customer Rating: 4.8 out of 5 stars (55 Customer Reviews)
Connect your towed car's lighting system to your RV's to get the brake lights and turn signals required for towing. Designed for use with vehicles that have separate brake and turn signals. 4-Pole flat loop and wiring converter included.by: Chris B03/25/2015
Subaru Outback Wagon
In ordering the parts I got a little confused as to exactly which kit I needed. My motorhome has combined brake/turn signal lights & the car ('03 Subaru Outback) has separate brake/turn/parking lights. Thought I needed the 6 diode kit (which I ordered) until I had all the parts here & read through the instructions for the umpteenth time (BEFORE cutting anything) & then realized what they were doing. Turns out all I needed was the 4 diode kit. Sounds like there won't be any problems returning the unneeded parts since they were never installed. Great service there!
Took a lot apart in the back of the car because of the lack of space behind the tail light assemblies, but it all comes apart pretty easily. Also allowed me to route the wiring along side the stock harness. Have a bunch of 1/2" split loom here & used it.
Thought I would have lots of wire left over, but I actually had to splice 2 cut offs to make a jumper long enough to get from 1 side of the car to the other. Glad the car wasn't any longer & I didn't have to make up 2 jumpers as with some of the kits!
Hardest part was finding a hole in the firewall & getting the harness routed under the dash so as to not tangle with the pedals, etc. I just don't flex like I used to.
Everything works fine although it was NOT a "5 minute job".
by: Rich L.03/05/2013
Chevrolet Volt
The diodes and wiring are good and worked well. But the 118158 converter produced a 3.5 volt drop such that the brake lights were as dim as the tail lights. And when a turn signal was triggered the brake lights dimmed even further. I ended up stringing a separate brake wire through the car and re-wiring my truck with a 5-wire connector.
by: Jerry B.08/04/2013
2013 Honda CR-V
Prompt deliver of product. We haven't gotten this part of our project installed, we are still watching YouTube videos and other info on procedure. Had very little difficulties installing base plate on our 2013 CRV this should go well also. Our lights are a little more complicated but once we figure out how to actually wire to them every thing we've learned so far is very straight forward.
by: Christopher03/14/2018
2012 Ford Five Hundred
I used this wiring kit on a 2012 Fiat 500 Sport. All of the components worked as advertised and I am really pleased with the result. I used the 6 diode kit so the FIAT's turn signals would work the same when it's being towed as when it is driven.
This was my first light wiring kit installation and it was quite a challenge on the small FIAT to fish the flat cable from the rear of the car to the front. I ran it along the drivers side - over the rear wheel well, along the rocker panel, and up over the front wheel well. The wheel wells were the most difficult part of the job. Running the cable from driver's side to passenger side along the rear bumper and running it from the front wheel well to the front of the car and installing a connector were straightforward.
One problem I ran into is the female disconnect terminals supplied with the kit that are used to connect wires to the diodes anticipated a thicker wire (16-14 AWG) than what the FIAT uses. A quick trip to a close by big box store was all that was needed to find the same connectors for a thinner gauge wire (22-18 AWG). You still use the supplied disconnect terminals with the flat cable connections to the diodes.
by: John J06/12/2016
Honda
I bought this wiring kit because I wanted to wire my 2013 Honda CRV myself. E-Trailer has a video that is helpful in its installation . What I later found out was you need to route the wires through some covers underneath the vehicle and unless you have some means to raise the vehicle pretty high that routing will be difficult. I went to the Honda dealer and several other auto places and no one would install this kit for me because of liability reasons so now I have a product of question. I ended up at a friends garage who had a lift and we routed the wire from side to side and from front to back in about 20 minutes. Once secured in place I took the car home to finish the diode installation. Using the video it was easy to install. The only problem I had was putting the rear tai lights back in. You will need the separate the diodes as the space between the body and light housing is very close. Other than that everything worked out well.
by: Dale H06/26/2020
2013 Honda Fit
An ingenious system that enables a combined break and turn signal set up on your RV to properly operate the separate turn signal / brake setup of your toad. Beautiful!
Dale H.
6/28/2021
Have been using the brake and turn signal system for over a year now, and it is still working flawlessly!!
by: Bill02/05/2018
Toyota Tacoma
I used the wiring harness on my Tacoma pickup in preparing to tow it behind our 40’ motorhome. The harness went on easily from the front grill to the rear lights, where I soldered and heat wrapped each connection. The instructions were ample and easy to follow.
It’s been a year since the installation, and the wiring has worked flawlessly!
by: ALEX A11/08/2016
The wiring works great, I got more in the KIT than I could possible use and I am sure I had to pay for the extras, but I got what I needed and am very happy.
Alex A.
11/8/2017
it is doing great
by: Jean C07/24/2019
Honda Civic
The Roadmaster Wiring Harness was installed easily by our mechanic and works perfectly with our Civic and RV. I'm certain we will use etrailer.com for our new dinghy towing requirements!
by: Ron B05/23/2017
2015 Fiat 500
The kit contained all you need to wire lights on a Fiat. The instructions were clear and concise. Excellent product and service as usual for etrailer.
Ron B.
5/25/2018
After one year this kit is still doing its job flawlessly.
by: Rich B.06/02/2012
2012 Kia Sportage
This harness was an excellent choice. It took about an hour and fifteen minutes to install. Everything is spelled out for you in the instructions and if all else fails, watch the online video. The hardest thing was removing the tail light on the Sportage. I has a ball joint connection that forces you to pull harder than you think you should. I was afraid I would break the light. But it popped out and the rest was easy. Very complete and works great! The connections fit like factory. Very Pleased.
by: David10/28/2017
2010 Suzuki Grand Vitara
A great product. Installed easily. Previous wiring experience would be good for somebody wanting to use this.
It has performed flawlessly over the past year. I’d recommend it.
David
10/28/2018
Fantastic. No problems at all. Works as required every time I plug in.
by: Jerry07/29/2021
Ford Ranger
Install on a 2020 Ford Ranger. The product was excellent. The only problem I had was trying to remove the nuts holding the front bumper on. Ford has these bolts embedded in a hard plastic frame that spaces the three bolts on each side. In trying to remove the nuts I got them started then they would neither come on off nor reinstall. The nuts were spinning the bolts. After thinking about the fix I was in I decided to cut the factory bolts off and replace them with 1/2" x 1 1/2" bolts with fender washers. I tried a sawsall with a metal cutting blade and the bolts ate the teeth right off. I put on a Milwaukee thick metal cutting carbide tooth blade and that did the trick. Other than that, which is Ford's fault, everything went as the etrailer videos showed. If you are doing this make sure to spray the exposed bolt threads with WD-40 or something like before you try to remove the nuts.
by: Danny07/05/2014
2013 Chevrolet Sonic
I found the product to be of very high guality. I did not supply pictures as I would need to remove my taillights again. I had to covert a motor home that did not have separate turn signals to a Sonic that did. The materials supplied allowed me to just that. I do have two other comments-The instructions showed the wires on the car on the passenger side which is opposite from the Sonic and most others I would think. I had to reverse my thinking to do the correct procedure. Also, could you not supply unit specific instructions if the towing vehicle lighting arrangement and the towed vehicle was identified. This would eliminate the extra parts that I did not need and help the customer complete the task. Other than that, very good product. I guess it is better to have extra parts ratter than not having enough but I just thought this might cut the cost for some applications.
by: Dale05/06/2016
This is my second purchase of wiring kit for towed vehicle I have bought from Etrailer. I had some questions and Etrailer was able to answer every question I had. I will go back to Etrailer next time I need products such as this.
by: only1jerry11/05/2016
2005 Subaru Forester
I did a lot of research before buying. etrailer's prices and support are above average. I ordered the Roadmaster 913-1 baseplate, Falcon-2 towbar and 154 universal lighting kit. I was completely surprised by the fast shipping, all parts arrived 3 days before I expected AND the shipping was free!
Before I ordered I talked with etrailer support to ensure I ordered the correct parts. They were knowledgeable and helpful.
by: James04/17/2021
Works as advertised. Design of these wiring kits is based on converting the common 3 bulb brake/turn signal systems to a 2 bulb system. This makes them unnecessarily complicated.
by: John D07/29/2021
Was skeptical about using with led tail lights,but it all went well. The installation videos are spot on. After one year and about 12k miles traveled, no problems. My vehicle is a 2020 Ford Ranger.
by: Wayne06/06/2015
Product arrived on time.Online videos very well done.Katie D. provided excellent customer service on all the parts ordered.
Wayne S.
6/11/2016
very happy with product still working without any problems
by: Dave G.07/28/2015
2008 Honda Fit
Very complete, hi quality, reasonably priced kit for lighting my "toad". If you have combined lights on your RV and separate lights (brake and turn) on your "toad", this is the kit.
by: Mike03/29/2017
Nice set up. Instructions were spot on. The hardest part of the installation was removing car interior panels to get to the wiring. Would definitely recommend this product.
by: Dale P03/20/2019
Ford
I ordered a towbar and accessories through the Internet site. It was very easy and also very informative. The supplies were ordered and I receive them in a couple of days. It was a great price and I did much research before I ordered. We are planning to install the towbar on our Ford C-Max and tow it with our phoenix cruiser 3100.
by: Kevin 04/27/2021
Contained everything I required except the independent stop light switch.
by: Greg R.12/18/2016
Customer service was the best. Product delivered as expected. I recommend this wiring package. My towing safety comes first and Etrailer delivered.
by: Denny K.07/14/2016
2014 Fiat 500
a little bit hard to get all wiring in, because I want the wiring not to be apparent and not exposed to harsh weather( snow, salt ,etc). But this setup is ideal, works perfectly and very quick when you connect your car the the motorhome.
25
55
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Parts Needed to Tow a 2009 Toyota Camry With a Fleetwood RevolutionIf your 2009 Toyota Camry has an automatic transmission, then it will require a tow dolly like the Roadmaster Tow Dolly, # RM-2050-1, that you referenced on our website. One advantage to using this tow dolly is that it already comes with brakes and lights which will minimize the amount of additional items you will need. In order to operate the electric brakes on this tow dolly, you will need to have a 6-Way round trailer connector on the motor home, and an electric brake controller. I...
view full answer... - Does Roadmaster 6 Diode Tow Bar Lighting Kit Fit 2018 Ford Taurus Yes, the Roadmaster 6-Diode Universal Wiring Kit # 154-792-118158 that you referenced will fit and work well for your setup. We confirmed with Roadmaster that the kit is a fit for your 2018 Ford Taurus and it is designed to work with LED taillights so you are good in that regard as well.
view full answer... - Parts Needed to Flat Tow a 2017 Mini Cooper 2-Door S Model Behind an RVIn addition to the base plates # RM-521882-5 for you 2017 Mini Cooper 2-door S model you will need a compatible tow bar, safety cables, lighting, and supplemental braking. For a tow bar I recommend the Falcon 2 # RM-520. It is the most popular compatible tow bar and I have linked a video review of it for you. For safety cables use # RM-643. The coiled design helps keep the cables off of the ground. For lighting the recommended kit for your Cooper is the 6-diode kit # 154-792-118158 and...
view full answer... - Recommendation On Using A RoadMaster 7-Wire to 6-Wire Flexo-Coil Kit on a 2016 Ford Focus Hatchback Yes, it is possible to use a 7-way to 6-way coil cable to connect between your RV and your 2016 Ford Focus Hatchback. You will need the Roadmaster 7-Wire to 6-Wire Flexo-Coil Kit, # RM-146-7. Once you have the Roadmaster Universal Diode Wiring Kit, # RM-154, installed, the front 4-flat plug can be cut and removed. The 4 wires are then wired into the 6 pin connector. The connector is installed on the front of the focus. The Flex-Coil cable can be installed between the 6 pin connection and...
view full answer... - Base Plate Kit for Flat Towing a 2012 Ford Edge with Eco BoostThe correct base plate kit for towing your 2012 Ford Edge with Eco-Boost is the Roadmaster XL Base Plate Kit, # 4408-1, if your vehicle does not have Adaptive Cruise Control. If your 2012 Edge does not have the Eco Boost option, but does have adaptive cruise control, then you would want # 524426-1. If your 2012 Edge has both Adaptive Cruise Control and Eco-Boost, we do not have a base plate install kit that will work on your vehicle. I do not believe both options are available with the...
view full answer... - Converter Needed When Towing Vehicle with Separate Wiring System Behind RV with Combined SystemIt sounds like you are needing to properly activate the signal lights on your Scion xA, which features a separate wiring system, while it is being pulled behind your Sprinter 3500 that has a combined system. The Curt Vehicle to Vehicle Tail Light Converter # C56196 that you referenced is indeed the correct part for this application. The converter is specifically designed to separate out the combined signals on your RV so that it works with the light functions on your Scion xA. To complete...
view full answer... - Tow Bar Wiring Recommendation for a 2002 Chevy TrackerWhat you need for your 2002 Chevy Tracker is tow bar wiring to allow a tow vehicle to control it's taillights as it is being towed. For that you would want the Roadmaster diode kit part # 154-792-118158 that has been confirmed as a fit for your Tracker. I attached an install video for you to check out as well.
view full answer... - Parts Needed to Flat Tow a 2011 Mini Cooper Base ModelFor your 2011 Mini Cooper hardtop base model the correct Blue Ox base plate kit is the part # BX1307 which is a confirmed fit. Next you will need a compatible tow bar. The tow bar I recommend the most is the Alpha, # BX7380. This tow bar does include another item you will need, safety cables. I have linked a video review of the tow bar as well. Next you will need lighting. For lighting you have some options. If you want something that installs quickly and does not splice into the vehicle...
view full answer... - Parts Needed to Flat Tow a 2014 Honda CR-V Behind a Motor Home with a Stowmaster Tow BarThe correct base plates for the 2014 Honda CR-V are # RM-521567-4 and they are compatible with the Stowmaster tow bar. The base plates you referenced, # 521190-1, are for a Honda Fit and would not work on your CR-V. The Honda CR-V is one of the more popular vehicles to flat tow. Just be sure to consult the vehicle owners manual for specific information on flat towing it. In addition to the base plates and tow bar you will also need safety cables, # RM-643. The coiled design helps keep...
view full answer... - Parts Needed to Flat Tow a 2011 Ford Explorer Behind a Motor HomeYou should not have to drill new holes in your 2011 Ford Explorer to install base plates # 4427-1A. But there are some holes that will need to be enlarged, a bracket that will have to be modified, and some fascia trimming to complete the installation. I have included a link to the installation instructions for you to view. In addition to the base plates you will also need a compatible tow bar, safety cables, lighting, and supplemental braking. For a tow bar I recommend the Falcon 2, #...
view full answer... - Recommended Tow Bar Wiring For 2013 Honda Fit Being Flat-TowedThe Curt T-Connector Vehicle Wiring Harness, part # C56011 is designed to work with your Honda Fit to tow a trailer behind the vehicle. This harness is not designed for operating the lights on your Fit while it is being towed. For that you would need tow bar wiring. When you flat-tow your Honda, you will need kit like part # 154-792-118158. This is a diode kit and includes the converter needed for your Honda with separate wire(meaning the brake light bulb is separate from the turn signal)....
view full answer... - Parts Needed to Flat Tow Behind Motor HomeThere are several items needed to flat tow your vehicle. Flat towing is easiest with a vehicle with manual transmission. Additionally, as a general rule, the tow vehicle should weigh twice as much as your towed vehicle. You will want a tow bar for the vehicle you will be pulling. Base plates are vehicle specific. To give you an idea, if you will be flat towing a 2005 Subaru Forester, I recommend the Blue Ox Base Plate Kit # BX3612. This base plate has removable arms so that the base plate...
view full answer... - Parts Needed to Flat Tow a 2014 Ford C-Max Energi Behind a Motor HomeWhen a vehicle is new manufacturers do not have easy access to all models of that vehicle. If they cannot test it then they have to say items are not a fit until they can test it. Roadmaster has since tested base plates # 524432-1 on all models of the 2013 and 2014 Ford C-Max and they do fit all models included the hybrid and Energi models! Next you will need a tow bar. I recommend the Falcon 2 tow bar, # RM-520, since it is one of the most popular compatible tow bars for Ford C-Max owners....
view full answer... - Flat Towing Set Up for 2013 Fiat 500I would be happy to help you set up your 2013 Fiat 500 for flat towing. You can only flat-tow your Fiat if it has a manual transmission. If you have an automatic transmission you will need the Demco Kar Kaddy X Tow Dolly w/ Disc Brakes - Tilt Bed Frame - 4,800 lbs - Wide Tread item # DM9713093. You are going to need a tow bar, base plate kit, wiring harness for lights, supplemental braking system, a battery charge line, stop light switch, and potentially a high low adapter. If you don't...
view full answer...
- Complete Flat Towing Set Up for a 2021 Mini Cooper 4 Door I would be happy to help you set your 2021 Mini Cooper 4 door up for flat towing. To start out with you're going to need a base plate kit. You will want the Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM-521884-5. This fits the convertible and hardtop - S models and the base model. The hidden bracket design provides improved aesthetics compared with standard brackets. I have attached a picture below of what this base plate kit will look like with the arms removed. Next...
view full answer...
- Parts Needed to Flat Tow 2003 Toyota Tacoma 4WD Manual Behind Class C MotorhomeFlat towing a vehicle behind a motorhome, safely and legally, requires a number of components which include the tow bar, safety cables, a wiring/lighting kit of one type or another, base plates and a braking system for the towed car, and often also a high/low hitch adapter and wiring extension. All of these items are covered in the linked article on flat towing and additional articles on braking systems and high/low adapters are linked too. I also suggest you check your Tacoma owner's manual...
view full answer... - 7-Way to 4-Way Round Wiring Adapter to Flat Tow a 2001 Honda CR-VWe do indeed carry a 7-Way blade style to 4-Way round adapter. It is # HM47043. This is a coiled cable that can stretch to 8 feet long. The 7-Way end plugs into the RV and the 4-Way end to the vehicle. The diode kit you mentioned is # 154-792-118158. For a 4-Way receptacle to mount on the front of the CR-V use # PK11410. It looks like you will have to pull fuses to flat tow the CR-V. Consult the owners manual to confirm. To avoid having to pull a fuse every time you can install a fuse...
view full answer... - Parts Needed to Flat Tow a 2014 Jeep Patriot Behind a Motor HomeAccording to the owners manual for the 2014 Jeep Patriot in the recreational towing section, you can only flat tow the vehicle if it has a manual transmission. If it is an automatic it cannot be towed with all 4 wheels on the ground. It can be towed on a tow dolly, such as # RM-2050-1, with the front axle on the dolly. This only works for front wheel drive models and would work with manual or automatics. And of course, the third option is to tow the vehicle on a trailer with all 4 wheels...
view full answer... - Wiring Instructions for SMI Stay-IN-Play DUO on 2008 Jeep LibertyThe SMI Stay-IN-Play DUO Supplemental Braking System # SM99251 referenced in your question does not require separate brake and turn signals to operate properly. However, if you want to use the separate turn signals on your 2008 Jeep Liberty, then I recommend installing the Roadmaster 6-Diode Universal Wiring Kit # 154-792-118158 to connect the Jeep's lighting system to your RV's. To let the Jeep's system operate the brake lights, the red wire coming from the converter on this wiring kit...
view full answer... - Components Needed To Flat-Tow 1993 Mazda Miata Behind MotorhomeYou sure can flat-tow your 1993 Miata behind your motorhome. Since we only offer Roadmaster base plates for your vehicle you have a couple options. I recommend the Roadmaster XL Base Plate Kit, part # 711-4. If you decide you want to go with the Blue Ox Alpha Tow Bar, part # BX7380, you will need the RoadMaster Base Plate to Blue Ox Tow Bars Adapter, part # RM-033. Then you will need the Roadmaster Tow Bar Quick Disconnect Kit, part # RM-201. If you decide this is too many components...
view full answer... - Parts Needed to Flat Tow a 2006 Honda Element Behind an RV with Roadmaster Eagle 8000 Tow BarYes, the Eagle 8000 tow bar is compatible with the MX base plates # 1541-5 for your 2006 Honda Element. The tow bar arms will connect directly to the MX arms without using the Eagle's base bar. If you don't already have safety cables you can use # RM-643. For lighting you can use a simple magnetic kit such as # RM-2120. For a more permanent lighting solution I recommend the 6 diode kit # 154-792-118158. You may also need a high/low adapter to keep the tow bar level. I have linked a help...
view full answer... - Parts Needed To Flat Tow 2005 Jeep Liberty with Blue Ox Rangefinder II Two BarIn order to tow your 2005 Jeep Liberty with your Rangefinder II BX4322 tow bar, you will need to use Roadmaster base plates, such as the EZ4 Base Plate Kit # RM-521423-4, with the Blue Ox Rangefinder II to Roadmaster Bracket Adapter # RM-037. This setup is needed because Blue Ox does not offer a base plate kit for the 2005 Liberty that is compatible with the Rangefinder II tow bar. You will also need a light kit for the Liberty. For a temporary lighting solution you can use the Magnetic...
view full answer... - Do The Towed Vehicle's Turns Signals Get Used With the Roadmaster Hy-Power Diode KitThe Roadmaster Universal Hy-Power Diode Wiring Kit part # RM-154 will use the brake light bulb to display both the brake and turn signal circuits. The turn signal bulb will then not be used while the vehicle is in tow but it would still work as normal while driving the vehicle. That said, if you want to use the turn signal bulbs on the vehicle while in tow all you need to do is use the Roadmaster 6-Diode Universal Wiring Kit for Towed Vehicles with Separate Lighting part # 154-792-118158...
view full answer... - Parts Needed to Flat Tow a 2014 Chevy Spark 1LS with Manual TransmissionI spoke with my contact at Roadmaster and the base plates # 523174-1 will fit your 2014 Chevy Spark 1LS with manual transmission. For a compatible tow bar I recommend the Falcon 2, # RM-520. For safety cables use # RM-643. The coiled design keeps the cables off the ground. For lighting if you will not be towing very often I recommend a magnetic kit # RM-2120. With this kit you will not have to cut into the vehicle wiring for installation. If you plan on towing the Spark often then I recommend...
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Sue W
Written by:
Lindsey S
Updated by:
Adele M
Updated by:
Rachael H
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Isabelle B
Video by:
Andrew L
Video by:
Alan C
Video by:
Chris R
Installed by:
Cole B
Installed by:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jerry B.
2/2/2015
So far, so good. Weve only towed the car one way from KS to Fl. Everything working great. Thinking about adding a receiver hitch but, will take it to the dealer as we sold our farm, and our tools and have the grandsons arent available to do the hard work.