To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
More reliable than a standard portable system, lightweight actuator attaches to brake pedal and driver's seat and removes for storage. Car brakes perfectly in sync with motorhome.
Features:
Specs:
Double-check that your vehicle is correctly entered in the Fitguide at the top of the page. If there's a custom seat adapter available for your vehicle, it will be listed as an accessory part on the search page.
A braking system is a must when towing a vehicle behind your motorhome. Without it, the weight of the towed car can create a safety hazard, strain your RV's brakes, and affect the warranty of both your car and motorhome. Most states legally require a supplemental braking system, so if you don't use one and you end up in an accident (which is more likely since your RV takes longer to come to a full stop), your insurance and liability headache just doubled. You also won't have any breakaway system; if there's an accidental disconnect, there's nothing to bring your car to a stop.
Roadmaster's BrakeMaster offers you truly proportional braking, meaning that when you apply the brakes in your motorhome, the braking system will engage the brakes of the toad (towed vehicle) at the same time, with the same intensity. Whether it's a gradual slow down to a red light or a sudden stop in an emergency, the toad and the RV will brake together.
This is a huge advantage over inertia-based systems, where the braking is triggered by sensing the forward momentum of your toad. While often effective, this method creates the potential for false braking, where something as simple as rough terrain can activate the system when it's not needed. Not only does this make for a rough ride, it can prematurely wear down your toad's brakes over time. With truly proportional braking, the system will only turn on when you need it.
To achieve proportional braking, the air compressor installed on the coach supplies the air pressure that will activate the braking cylinder. It connects to the proportioning valve (also installed on the motorhome), which measures the pressure with which the hydraulic brakes are applied in your RV.
The solenoid on the valve wires to your RV's tail lights; when it receives the signal that your motorhome brakes have been activated, it allows a proportional amount of air from the compressor to be released into the air line.
The air line routes back to a quick coupler on the rear of the RV, mirrored by a quick coupler on the front of the toad. The RV's coupler connects to the car's coupler with the included air jumper.
An air line then runs from the quick coupler to the reservoir of the breakaway system mounted under the hood. If there's ever an accidental disconnect, the breakaway system will trigger and send a reserve of pressurized air to the brake pedal and bring the car to a stop.
From there, another air line runs down to a quick coupler attached to a bracket under the dash. When you're ready to flat tow, attach the actuating cylinder to the driver's seat and the brake pedal, plug the cylinder into the coupler, and connect the RV and toad with the air jumper. Voila, the whole system is connected.
When you put on the brakes in your motorhome, the proportioning valve sends pressurized air almost instantaneously to the cylinder clamped to the toad's brake pedal. The cylinder actuates and presses the pedal down, braking the car at the same rate and with the same intensity as the RV.
The BrakeMaster is a hybrid between a portable system and a permanent system. Most of the components are permanently installed on the RV and in the toad, while the actuating cylinder is removable. Because it attaches to the driver's seat and the brake pedal, the actuator is more secure than a typical portable system and offers more accurate, reliable braking.
For the air compressor, you'll need find a good mounting location on your chassis, away from heat, moving parts, and the elements. You want it within 20' of the RV battery and somewhere you can easily drain condensation from the air tank as needed. The proportioning valve will also need to be mounted on the frame, and then teed into the motorhome's brake line.
The breakaway system installs under the hood of your towed car. It's best if the cylinder is mounted vertically so it's easy to drain any moisture that builds up over time, but it can be tricky to find a spot in the engine bay where you can access the drain valve on the bottom, so make sure you plan ahead. You also need to find a spot where it won't be exposed to any direct heat or moving parts.
To mount the actuating cylinder, you're going to need to install a custom seat adapter (sold separately). If there isn't one available for your year/make/model, you can use a universal floor plate (450650-01 - sold separately) instead.
Installing the BrakeMaster is a big undertaking, but once it's done, setup only takes a few minutes. To connect the actuator, just clamp it around your brake pedal and pin the other side to the bracket under your driver's seat, and plug in to the quick connect under the dash. Plug the patch cord into the quick couplers on your RV and toad, and you'll be ready to flat tow.
While this system is a more budget-friendly option, there are more connection points than comparable braking systems and they are more likely to develop leaks. It can also be difficult to find space in the engine bay for all the components, especially on newer models. The complicated installation requires careful precision, so you'll really need to know what you're doing. This is not for the casual DIYer!
Included with this system is Roadmaster's BrakeAway. A breakaway system is an absolute must for safe flat towing. In an emergency situation where the toad becomes detached from the RV, the breakaway switch will immediately activate the brakes and bring your vehicle to a stop.
The BrakeMaster also comes with an indicator light for safety and peace of mind. This light, which mounts on the dash of your RV, is easy to see while you're driving, and will light up when the brake pedal of your toad is depressed. This lets you know that the system is working and your toad is in fact braking.
Most supplemental braking systems have a method of letting you know you when they activate, but not all of them are checking if the toad is actually braking. There could be an error that causes the system to activate without actually applying the toad's brakes. Or your brake pedal might actually be continuously depressed when it shouldn't be. But unless you have a system that's monitoring your vehicle, you won't know it until the damage is already done.
The indicator light that comes with the BrakeMaster connects directly to your toad's brake light switch. That way the indicator only lights up when your brake pedal is depressed and a signal is sent to the brake lights.
Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
To flat tow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flat tow braking system.
| For the RV | Between the RV and Towed Car | For the Towed Car |
|---|---|---|
| Hitch | Tow bar | Base plate |
| Wiring plug | Safety cables | Braking system |
| Wiring adapter cord | Wiring kit/diodes |
The custom-fit base plate installs on the frame of your toad so you can connect the car to your RV with a tow bar. Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
Alternate Instructions
Average Customer Rating: 4.7 out of 5 stars (128 Customer Reviews)
More reliable than a standard portable system, lightweight actuator attaches to brake pedal and driver's seat and removes for storage. Car brakes perfectly in sync with motorhome.Kit fits great! Hooked up a 2004 Workhorse to a 2002 Jeep Liberty. It might be preferable to be handy with some advanced mechanical skills and tools to install this efficiently. Directions are great but you do need to figure out your own locations for certain items like the break-away reservoir, compressor, routing lines and wires out of harms way, but not bad at all. Parts are great, everything there but added a couple different wiring splices of my own.
Your customer service leaves nothing lacking, and this follow-up from you is so out of character for the many web sites I have purchased from over the years. I am impressed by you and your company.
I bought the tow bar and the brake system for my Equinox, and installed them my self (I am 70 years old) - and with your provided instructions and video, I had no problems (even though I was surprised by the number of parts and detail that went into the assemblies).
Both systems have worked very well, with no problems. I am completely satisfied with them, and have told my friends and traveling acquaintances about your company.
Thanks for your follow-up!
Ordering was easy, I verified the seat bracket by telephone, and everyones I talked to was a pleasure, all my questions were answered in a professional manor. Price could not be beat anywhere else. My dealer could not beat the price, so I bought what I needed and then gave it to my dealer to install. I have now used it for about a week driving 1,000 miles and it works as advertised, even up and down mountains using the exhaust brake, everything worked better than I could hope. Thank you
Very knowledgeable company excellent service thank you so much for me guiding me into the correct equipment to tow my Jeep Wrangler!
Fast delivery in good condition .
recommend having it professionally installed or at least a advanced DIYer.
Parts arrived on a timely basis and were very well packaged. I have not started the install yet.
This braking system does what it's suppose to do, smooth proportional braking between motorhome air brakes and the tow vehicle. The only reason I did not rate at 5 stars is that there is a slight misalignment of air cylinder mounting bracket and 2022 Jeep Gladiator brake pedal.
The product shipped on time and has been worry free. etrailer gets 5 stars for customer service every time I order from them.
The install on my Ford Maverick is clean and functional, so this is more of a customer service review... excellent customer service!
During the 4-day towing set-up install, the forecast was for freezing temps and my rig was not winterized. I called in mid panic and the motorhome was moved indoors.
A few months after using the tow set-up, a minor problem developed. I called and the CSR apologized and said, I can see how that might be frustrating, and a replacement cable (slightly longer) was sent free of charge.
Well built brake system. Installation is better done by a mechanic. It took about 3 hours. In my opinion, an air system is the only way to go. Set up when you get ready to tow takes about 1 minute. Just pin the brake pedal clamp, pin the base of the cylinder and plug in the air line and you are ready.
Second set on second Jeep, Brake system works great, a bit of an install with the air lines and placement of the small tank in the crowded engine compartment BUT once it is in the setting of the brake peddle arm is easy!
Love the system better brake control than with other electric ones
works very good, did not come with indicater light or wire that tells you in the cab that the breaks have been activated
Make sure you order the plate needed for your vehicle. Had to wait a week until that came in to complete the installation. Plus if you are placing in a Ford Edge, there is a firewall access behind the battery. Knowing this makes it easier to do. Also on the Edge you have to make a small extension to get the connectors easier to disconnect.
For me it is the perfect towed braking system! Simple operating principle, easy installation, quick set-up and detach. Never needed for breakaway, but pre-trip test is always perfect functioning. Definitely saves on coach braking force needed.
(Installed on 2015 Itasca 34T DP w/2007 Toyota Tacoma)
This is a simple straight forward brake system.Had it installed in about a half day. The only thing that took the time was running the air line and wiring on my 40ft.rv.Had enough air line for the rv but had to buy more for the tow vehicle.No big deal.The brakemaster itself is really easy to install.Anyone with a little mechanical experience won't have a problem.Works like it should.Thanks e trailer!
Works as it should and easy to install and remove
it works great
Do you have a question about this Flat Tow Brake System?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Armand L.
8/13/2015
I installed on SENECA 2015 for towing JEEP WRANGLER 2012 ,and after one year I am very satisfy of this system.It is really a progressive braking system working smoothly and efficiency . PS : sorry for my english , I am a french speaker.