Quick Fist 3" Clamp - 2-3/4" to 3-1/4" Inner Diameter - Rubber - 50 lbs

Video Transcript for Quick Fist 3 Inch Rubber Clamp Review

What's up everybody It's AJ with etrailer.com. Today we're gonna be checking out the Quick Fist Clamp. So it's gonna be a rubberized clamp system where you can put an object in there, bring this around, and it holds it really tight. Let's check it out. We mounted it inside of an enclosed trailer today just to show you how it works. This is undoing the latch, now it will slip down at that point because it's not pushing in on it, but still has a good hold on it right away when you put that in there.

So you just wanna bend out the outside of the clamp to remove it. There's no moving parts, I like that. There's nothing that you have to add on to worry about breaking off. It's gonna be right here when you need it. So you can quickly just put your item right back where you got it, and then pull the strap over these notches, and that's what holds it in there.

Take a closer look at the clamp here. It's gonna be made out of a heavy duty rubber. It's really easy to remove the item or put whatever you want in there. Great for fire extinguishers or fuel canisters. Now you can also just pry the jaws apart when you go to put the item in there, and then you just pull the strap over the notches to tighten it up.

It's gonna be really easy to use, made out of a heavy duty rubber. Just pull the strap here out of the notches to release whatever item you put in here, and then you can just push the jaws apart to take it out. So we have a fire extinguisher in there right now, also will work with a fuel bottle. You just do it in the reverse order. Bring the jaws apart, they close in around the item already holding it tight.

Now it's still gonna slip until we take this strap, put it back in one of the notches to tighten it up. So we need to go just a little bit more. Goes in there really easy. I like that everything's contained. There's no moving pieces, no separate pieces, it's all right here. Now it's gonna work with objects that have a diameter from 2.75 inches all the way up to 3.25. Also has a safe working load limit of 50 pounds. It's gonna mount really easily to the inside of your trailer. You're gonna have to get your own hardware. So you're gonna to get your own screw and washer, and it's recommended to use that, that way it's spreads out and holds it tighter. If you're trying to just do it the screw, it's not gonna be sturdy enough. So with that in place, you can see this is me shaking it back and forth. It's not going anywhere. Overall, I really do like this system. The jaws hold the fire extinguisher really tight and keeps it in the same spot so it's not rolling around everywhere. Especially with something like this, you're gonna be able to get it out quickly and use it when you need it. Well, I think that does it. Thanks for hanging out and hope this helped.