TPMS monitors your RV's tire pressure and temperature and uses Bluetooth to wirelessly send updates to your smartphone. Waterproof sensors have 3 pairing methods to make it easy to set up. App lets you set tire pressure and temperature settings.
Features:
Specs:
Note: Do not put the sensors in contact with tire sealant or other chemicals. By doing so, you could damage them and prevent them from working properly.
While on the road, it is very important to regularly maintain your tires and make sure they're inflated correctly. If your tires are underinflated or overinflated, they'll develop irregular tread wear and become prone to overheating and blowing out. The iN-Command TPMS helps protect your investment and keep your family safe by monitoring your tires and alerting you of any signs of danger before disaster strikes.
The iN-Command TPMS app is free to download and use. For Apple smartphones, it's compatible with models iPhone 6S and newer; for Android smartphones, it's compatible with models Android 8.0 and newer. Once the app has been successfully downloaded, select your vehicle, RV, or trailer configuration and the locations of the tires you want to monitor. The tire locations can be changed at any point, even after the sensors have been installed and paired. And with the purchase of additional sensors (sold separately), this app lets you monitor up to 22 tires, which is perfect for a fleet.
This TPMS includes 2 sensors that let you individually monitor each tire on your application for changes in pressure and temperature. These durable sensors are waterproof, which means that they can be used on boat trailers and other marine applications.
Using Bluetooth, the sensors will then send that information directly to the iN-Command TPMS app on your smartphone. The sensors will also check the strength of the Bluetooth signal as well as the status of the batteries.
There are 3 easy methods for pairing the sensors to the app on your smartphone: deflation, manual, and QR code.
For the deflation method, first install the sensors onto the valve stems. Then select one of the tires in the app before slightly deflating it on your vehicle. The air pressure from the tire will activate the sensor, and then the sensor ID number will appear on the app. Once the numbers have appeared for all sensors, re-inflate your tires.
For the manual method, first select the tire that the sensor is going on in the app. Then manually enter the ID number, which can be found on top of the sensor.
For the QR code method, first select the tire that the sensor is going on in the app. This will automatically activate the camera on your smartphone, which should be aimed at the top of the sensor. A red perimeter box will then come up and scan the QR barcode, causing the sensor ID number to appear on the app.
The app on your smartphone will provide you with visual and audible cues to warn you of dangerous changes in tire pressure and tire temperature, as well as alert you of changes with the sensor battery and sensor signal.
The app allows you to choose from multiple audible alarm tones, depending on your preference. You're also able to set the minimum and maximum tire pressure anywhere from 0 psi and 217 psi, as well as set the temperature as low as 100 F (38 C) to as high as 257 F (125 C). You should set the tire pressure and temperature settings based on the recommendations of your vehicle or tire manufacturer. Once these settings have been chosen, you will be alerted when the pressure or temperature falls outside of those perimeters. You can change these settings at any time.
The app also stores the history of your tires' air pressure and temperature. This allows you to look for patterns and determine if there are any extensive problems with one of your tires.
The sensors are easy to assemble and install. This TPMS includes 2 locknuts, 2 lithium batteries, 2 anti-theft attachments, and a wrench. Use the wrench to remove the sensor covers and then insert the batteries. Once the covers have been re-installed, fasten the anti-theft attachments to the bottoms. Remove the cap of your valve stems, thread the locknuts onto the valve stems, and install the sensors. Then secure the locknuts against the sensors with the wrench. These sensors will work with most types of valve stems, but it is recommended for you to use them with metal valve stems or T-Valve stems. The sensors are slightly more effective when used with these types of valve stems.
California residents: click here
Average Customer Rating: 5.0 out of 5 stars (5 Customer Reviews)
TPMS monitors your RV's tire pressure and temperature and uses Bluetooth to wirelessly send updates to your smartphone. Waterproof sensors have 3 pairing methods to make it easy to set up. App lets you set tire pressure and temperature settings.I am very pleased with the accuracy and ease of use of this product.
Still doing a good job. I would buy aga in.
Do you have a question about this TPMS Sensor?
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.