bing tracking image
  1. Snow Plow
  2. Chevrolet
  3. Silverado
  4. 2000
  5. SnowBear
FITS 2000 Chevrolet Silverado
SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall

SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall

Item # SB324-080
Our Price: $2,273.81
Snow Plow
Confirmed to Fit
2000 Chevrolet Silverado

1500

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Call etrailer.com at 1-800-940-8924 for expert service. We are your Chevrolet snow plow experts, and offer a great price. etrailer.com carries a complete line of SnowBear products for your Chevrolet Silverado 2000. SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall part SB324-080 from SnowBear can be ordered online at etrailer.com. Complete snow plow installation instructions and technical support.
  • All Info
  • Reviews (7)
  • Q & A (0)
  • Photos

2000 Chevrolet Silverado - SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall

  • Vehicle Snowplow
  • Fits 2 Inch Receiver
  • Wireless Remote and In-Cab Switch
  • SnowBear
  • Adjustable Blade - 3 Angles
  • Steel Blade
  • Steel Cutting Edge

Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.


Features:

  • Hitch-mounted plow lets you clear parking lots and driveways with your vehicle
  • Plow sits close enough to vehicle to reduce leverage and strain on plow, mounts, and vehicle
  • Electric winch allows you to easily raise and lower plow
  • In-cab toggle switch lets you raise and lower the plow from the comfort of your vehicle
    • Includes a wireless remote control as an alternative to the toggle switch
  • Adjustable, 3-position blade can be manually angled left, right, and straight ahead
    • Manual release handle is easily accessible from front or back of plow
  • Sturdy steel edge scrapes over a variety of solid surfaces - not for gravel or sand
  • Skid shoes let you adjust plow height to prevent blade from digging into the ground
  • Strong rubber deflector allows for better visibility by directing snow away from your windshield
  • Red visibility markers help you see plow edges so you can steer away from obstacles
  • Rugged and durable, all-steel construction
  • Black powder coat finish provides corrosion resistance
  • Simple installation
    • Slides into your vehicle's 2" front trailer hitch receiver (sold separately)
  • ISO certification ensures consistent, quality manufacturing
  • Assembly required


Specs:

  • Application: 2" x 2" front trailer hitch receiver
  • Blade dimensions: 82" wide x 19" tall
  • Height adjustment: 9"
  • 3 Blade angles:<>
    • Left 22 degrees
    • Straight ahead
    • Right 22 degrees
  • Winch lift capacity: 3,000 lbs
  • Weight: 315 lbs
  • 1-Year limited warranty


Notes:

  • Due to the size of this item it ships via truck freight.
  • Bottom of 2" receiver tube must be 13" from the ground.

This Generation III Classic Personal snowplow is the most recent innovation from SnowBear. This plow conveniently slides into your vehicle's front-mounted trailer hitch (sold separately) for easy, convenient mounting. It has a remote-controlled electric winch that will let you raise and lower the plow without leaving the warmth and comfort of your cab. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain. Angled trip springs are also built in to help keep the blade from catching and tripping.


Simple, Hitch-Mounted Installation

HITCH MOUNTING

This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. Unlike a plow that attaches to custom-fit brackets, which ties you down to just 1 vehicle, this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.


To install the Personal snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately) . Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.


How to Plow

Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead or 22 degrees to the left or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or private roadway where piling the snow straight ahead would create a barrier.


To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote or the in-cab toggle switch, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the Personal snowplow.


When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.


Easy Lifting with Electric Winch

WINCH

The electric winch on this plow allows you to easily lift and lower the blade using a toggle switch that mounts in your cab. You can also use the included wireless remote control. The winch uses a durable nylon strap, which is much quieter than a chain, to raise and lower the plow.



324-080 Snow Bear Gen 3 Classic Personal Snow Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall

Installation Details SB324-080 Installation instructions


Customer Reviews

SnowBear Plow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall - SB324-080

Average Customer Rating:  4.1 out of 5 stars   (7 Customer Reviews)

Remove snow quickly from your driveway or parking lot with this residential, hitch-mounted snowplow. Pivoting, 3-position blade glides over uneven ground. Remote-controlled electric winch lets you raise and lower plow from your warm cab.

by:

This little plow has been perfect for a Jeep Wrangler. I used it all winter and it kept the driveway clear, no complaints.

Etrailer Expert

Brooke M.

7/28/2023

How cool is that?! Thanks for sharing the awesome photo!



by:

It would have been nice if the gentleman who sold me my snow plow would have told me that I needed a drop down hitch instead of a straight hitch, which makes a big difference when trying to plow.



by:

The plow works ok. It's easy enough to get on and off the vehicle. Fatal flaw is the winch strap. I have replaced 3 times in one winter of plowing. If you purchase this product be sure to order extra winch straps!



by:

Works well for the price.



by:
Honda Ridgeline

I love this plow. It works great for our long driveway. This was easy to assemble and easy to take on and off our Honda Ridgeline.



by:

etrailer has been a great!!! They have been updating me on all the shipments.



by:


7
7

See what our Experts say about this SnowBear Snow Plow

  • Recommended Snow Plow and Front Hitch for a 2024 Chevy Silverado
    Yes, you can so long as your 2024 Chevy Silverado 1500 has a front hitch like the Curt item # C22NR. The SnowBear Plow for 2" Hitches item # SB324-080 mounts inside a 2" front hitch receiver. The SnowBear item # SB324-080 is a 82" x 19" steel blade plow that has 9" of height adjustment. It uses an in-cab switch and also comes with a wireless remote control.
    view full answer...
  • Is Bumper Modification Required to Install a Front Mount Hitch on a 2003 Dodge Durango
    We have front mount trailer hitches available for the 2003 Dodge Durango as long as it is a 4WD model. At this time there are no front mount hitches available for the 2WD models. If you have a 4WD model, then I recommend installing the Curt Front Mount Hitch, # 31080. This has the highest vertical pull rating of our front mount hitches and it does not require any bumper modifications. The receiver will sit just below the front bumper fascia. I have attached the installation instructions...
    view full answer...
  • Which Front Hitch Fits 1998 Jeep Wrangler for Use with Snow Plow
    Since your goal is to push a plow with a front hitch for our 1998 Jeep Wrangler you'd want the hitch part # C31028 instead as the Draw Tite # 65048 puts the hitch opening too high for a plow like the SnowBear part # SB324-080 to be used. In the install instructions there's no mention of needing to remove tow hooks so you wouldn't need to remove them.
    view full answer...
  • Is Curt Hitch C31064 Same as FHK31064 For 2013 Honda Pilot for Snow Plow
    Yes, the Curt hitch part # C31064 that you referenced is the same as the FHK31064 that you mentioned from Meyer Plow. Curt front hitches are the most commonly recommended by plow companies and it's very common they'll slightly change the part numbers or rebrand them as their own which is what's going on in your case. With this hitch installed on your 2013 Honda Pilot you could use the Snowbear Plow part # SB324-080 which is 82 inches wide, 19 inches tall, and is easily controllable wirelessly...
    view full answer...
  • Does the SnowBear Personal Snowplow # SB32408031114 Have to be Manually Adjusted?
    Yes, you will have to manually adjust the blade on the # SB324-080 to set the position to the left, right, or center. It features a manual release handle that is easily accessible from front or back of the plow. It does use an electric winch to allow you to automatically raise or lower the plow from inside your vehicle.
    view full answer...
  • Are The Mounting Brackets The Same For DK2 And Snowbear Snowplows On 2002 Jeep Liberty
    The Snowbear and DK2 snowplows require different mounting brackets. For example, in order to mount the Detail K2 Summit II Snowplow # K2SUMM8826 you would need Custom Mounting Brackets # K284121. You could, however, install Curt Front Mount Trailer Hitch Receiver 2" # C31022 which could accommodate various snowplows from both brands. The Detail K2 Snowplow # K2AVAL8219 and SnowBear Personal Snowplow # SB324-080 would both would fit this 2" receiver.
    view full answer...
  • Front Hitch Recommendation for a 2002 Dodge Dakota 4x4
    For your 2002 Dodge Dakota 4x4 I recommend installing the Curt Front Mount Hitch, # 31080. This has the highest vertical pull rating of our front mount hitches and it does not require any bumper modifications. The receiver will sit just below the front bumper fascia. I have attached the installation instructions for you to check out. Once you have the front hitch installed, a plow like the SnowBear # SB324-080, will fit in the 2 inch receiver.
    view full answer...
  • Snow Plow Recommendation for a 2002 Jeep Wrangler
    Actually SnowBear does not list a max height range for their snow plows like the part # SB324-080. Since you have a 2 inch front hitch installed on your 2002 Jeep Wrangler it should work well for you. I attached a review video for this plow for you to check out as well.
    view full answer...
  • Front Hitch Recommendation for 2020 Jeep Wrangler for Use with Snow Plow
    Curt is the front hitch manufacturer that our snow plow manufacturers recommend with their kits so for your 2020 Jeep Wrangler you'd want the Curt # C31086 and you'd be set. This would work great with a hitch mounted plow setup like the # SB324-080.
    view full answer...
  • Front Hitch Recommendation for 2020 Ford F-150
    The front hitch I recommend for your 2020 Ford F-150 is the Curt part # C31083 as it has plenty of weight capacity and installs easily. Also, Curt front hitches are the ones our snow plow manufacturers recommend and test with so we know they are very solid when used with plows like the SnowBear # SB324-080.
    view full answer...
  • How to Install SnowBear Plow to 2021 GMC Sierra 1500
    To use a SnowBear plow with your 2021 GMC Sierra 1500 you'll need to install a front mount hitch like part # C31088 (does not fit a 2.7L Turbo) and then use one of their hitch-mount snow plows like the Personal Snowplow # SB324-080 which is 82" wide x 19" tall and comes with an electric winch to raise and lower the hitch. The last time SnowBear made a custom mount for their WinterWolf snow plows for a GM truck application was for the 2018 model year which is why you'll have to switch everything...
    view full answer...
  • Snow Plow For 2003 Ford Ranger
    We do have snow plow setups for your 2003 Ford Ranger like with the SnowBear Personal Plow # SB324-080 which installs in a front hitch like the Curt # C31063 which is a confirmed fit for your truck.
    view full answer...
  • Snow Plow for a 2005 Honda Pilot
    We have a plow for your 2005 Honda Pilot, but the Winter Wolf will not work. The 2005 Pilot is only compatible with front-mounted hitches. To use a plow on the Pilot, you will need the Snow Plow Personal, part # SB324-080, and the hitch for your vehicle, part # 33328. This particular plow is 82" wide and 19" tall.
    view full answer...
  • Comparing Snow Plows for 2017 Ford F-250 4x4
    For all of the plows you mentioned you'd need the Curt hitch part # C31078 installed on your 2017 Ford F-250 to use them. The winch style is the most common seen and is generally considered to be the most reliable and best option. If for nothing else the visibility is much better with them like on the part # SB324-080 over the # SB324-140 due to the actuating arm. The K2 plow part # K2AVAL8422 is a great plow, the Snowbears are a bit more popular and well-known, but this plow is solid...
    view full answer...
  • Plow Recommendation for 2008 Jeep Liberty with Curt Hitch C31020 Installed
    The Curt Front Hitch part # C31020 would be an excellent choice for your 2008 Jeep Liberty so that you can do some snow plowing. For a compatible snow plow that would do a great job and would be very easy to use I would recommend the Snowbear # SB324-080. This plow is super easy to use as it can be totally controlled from the interior of your vehicle. The blade is 82 inches wide and 19 inches tall which is a great size for your application.
    view full answer...
  • What Parts do I Need to Mount the SnowBear Plow # SB324-080 to My 2022 Jeep Wrangler?
    I have an answer for you to connect the Snowbear # SB324-080 to your 2022 Jeep Wrangler. In the video you are referring to for the Curt Front Hitch - 2" # C31086, that shows the installation of the hitch on a 2018 Wrangler. While we do not have the ground clearance height of the hitch installed on a 2022 model, it most likely differs within a couple inches. Also, since the receiver tube measures 2 inches from inside the top tube to the inside of the bottom tube, the ground clearance is...
    view full answer...
  • Snow Plow That Fits a 2019 Toyota Tacoma
    While there are snow plows that fit your 2019 Toyota Tacoma, the SnowBear you referenced not a fit; also keep in mind the only plows that fit your Tacoma do require you to have Curt Front Mount Trailer Hitch Receiver # C31075. - SnowBear Personal Snowplow for 2" Hitches - Electric Winch - 82" Wide x 19" Tall # SB324-080 or 84" Wide x 22" Tall # SB324-081 You an also use the
    view full answer...
  • Snowplow for a 2000 Jeep Wrangler with Front Receiver Hitch in Bumper
    The first thing you will want to do is check to make sure that you can use a snow plow with the front mount bumper hitch on your 2000 Jeep Wrangler. The hitch will also need to be rated for the weight of the plow itself. Snowbear plow # SB324-080 is a great option. It comes with its own winch to raise and lower the blade. The blade is 82 inches wide and 19 inches tall and there is no restriction on hitch receiver height. This plow weighs 315 pounds. The large holes in the A-frame winch...
    view full answer...
    Image 1 for Image 2 for
  • Snow Plow for 1993 Jeep Wrangler with 18 inch Front Hitch Height
    The SnowBear personal snow plow part # SB324-080 would be a great option for the 2 inch front hitch you have installed on your 1993 Jeep Wrangler. It would work well with your 18 inch hitch height as well since this hitch does not have a hitch height range requirement. It uses an electric winch and in-cab controls to allow you control it easily.
    view full answer...
  • Dimensions of SnowBear Snowplow Replacement Scraper Blade
    The Replacement Scraper Blade # SB324-065 is 82 inches long and about 2-1/2 inches wide. It's a direct fit for the following snowplows: SnowBear Personal Snowplow # SB324-080 SnowBear Proshovel Snowplow # SB324-168 SnowBear Winter Wolf Snowplow # SB324-166
    view full answer...
  • Front Hitch for 2018 Jeep JL Wrangler Unlimited with No-Drill Installation
    For your 2018 Jeep JL Wrangler Unlimited the front-mount 2-inch hitch I recommend is the Draw-Tite # 65079. Installation requires no drilling and all hardware is included. We have not had a chance to make an installation video for this item on your specific vehicle but the written instructions are linked for you. Minor fascia trimming and skid shield removal will be required. With this 2-inch hitch installed you will easily have the weight capacity for using accessories such as a hitch-mount...
    view full answer...
  • Recommended Snow Plow For A 1994 Jeep Wrangler
    I can definitely point you in the right direction. If you are looking for a hitch mount plow we have the # SB324-080 from SnowBear. This is a 82" x 19" steel blade plow that has 9" of height adjustment. It uses an in-cab switch and also comes with a wireless remote control. Please note that the bottom of your receiver tube must be at least 13" from the ground in order to use this plow. We also offer the Detail K2 elite series plows for your 1994 Wrangler. I recommend the # K2RAMP8219ELT...
    view full answer...
  • Snow Plow Compatible with 2003 Jeep Grand Cherokee Laredo
    There is not a bracket kit that fits a Laredo model. You will need to use the Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # C31048 and then use either 82x19 inch snowplow # SB324-080 or # SB324-081 for 84x22 inch snowplow.
    view full answer...
  • Correct Replacement Winch for SnowBear Personal Snowplow for 2" Hitches - 82" Wide x 19" Tall
    The correct replacement winch for the SnowBear Personal Snowplow for 2" Hitches - 82" Wide x 19" Tall part # SB324-080 is the Replacement Single Speed Electric Winch part # SB263-282. There is not individual replacement parts for the winch unfortunately.
    view full answer...


< Previous



Do you have a question about this Snow Plow?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Wilson B
Updated by:
Wilson B
Employee Sabrina W
Updated by:
Sabrina W
Employee Amanda M
Written by:
Amanda M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.