Replacement Angle Cylinder for Western Hydraulic Snow Plow - 10" Stroke - Single Acting

Video Transcript for SAM Snow Plow Parts - Snow Plow Replacement Parts - 3371304202 Review

Speaker 1: Today, we're going to take a look at the replacement one and a half inch by 10 inch single-acting angling cylinder for Western snow plows. Now, this part will replace the single-acting angling cylinder on a Western snow plow. It is designed to replace the Western part number 56614.Now, the rod on this is a one and a half inch diameter rod. If we take our ruler, you can see, there's your one and a half inch diameter. That rod is 10 inches long, so it gives you a 10 inch stroke with a single-acting angling cylinder. The base right down here, diameter is one and three quarter inches, and the pin size, these holes here that the pins go in, the diameter on those are going to be three quarters of an inch.Now, the center to center dimension from this center of this pin hole to this one when it's retracted like it is now, 17 inches.

When it's extended out, the center to center measure will be 27 inches. Now, the port type right down here is a number 6SAE size and a location is 90 degrees.But, that should do it for the review on the replacement one and a half inch by 10 inch single-acting angling cylinder for Western snow plows.