To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.
Features:
Yakima CoreBars - 50" Long - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today on our 2017 Toyota Tacoma, we're going to be test fitting the Yakima JetStream roof rack system using the baseline towers. We're using the 50-inch JetStream bars, part number Y00425, baseline tower kit, part number Y00146, and we need two base clip sets, part number Y06145 for the front, and Y06128 for the rear.Now a measurement that we often get requests for is the distance of the crossbar from the roof of the vehicle. This can help you out with garage situations and things like that to make sure you have enough room. Basically from the top of our Tacoma to the top of our crossbar, it's about 4 inches. That's from the lowest point of the roof, not on top of the corrugated part.Now, each of our covers does have a hole for a lock. You can pick up the Yakima same key system, slide it in there and turn it, and turn the basic cover into a locking cover.Something I really like about the Yakima roof rack system here with the baseline feet is that any point of contact we have with our vehicle is going to be rubber coated.
So our foot packs, where they come down and make contact with our truck, we've got that nice rubber pad, and where the clips come around the edge, also completely rubber lined, all the way from this point all the way to the end of the clip. So any worries about damaging paint or scratches will be very minimal, especially if you take the time to clean off your roof before installing the system.You'll notice the design of this style bar is really sturdy. They've got the T-slot blocking piece in there so you can just push that down and slide your item into place. That's going to prevent you cutting this for every accessory that you might have. Also, you can see it's kind of in an H pattern.
That's going to give a superior strength and durability.Not only do we get questions about how it fits and how it looks, but also about how to put it together. We've already got the front crossbar on the vehicle. I've already got one side of our rear crossbar set up. We want to take just a second to look at the assembly process for the foot pack itself. We're going to start with our adapters designed for use with the JetStream bars.
We're going to place those in and push down until we hear the click. You can see that's going to allow a little bit of adjustability there. For our application, we want that to be set right in the middle, so both sides would be even. See the screw right down here That's for that, and then we also need to adjust the toe. See right here we've got a set screw, and for the rear crossbar we need that little tip that sticks up right here to be directly in the middle.
That would be what would be considered a B7.Next we've got our block that's going to slide right in. You see where that bolt comes up. That's going to thread right into the bottom. Going to use our provided tool and start to tighten that up. You can see we've got three notches here in the bottom where that screw is as well. We want this to be in that middle setting. That's where we had that level on the top. Then we're going to tighten that down until that metal portion becomes even with the black portions. You might leave it just a little bit looser than that, but not too much, about like that.Now we'll rotate that over. Typically, you're going to have the rubber gasket that's blocking our T slot there. We'll get that out of the way for now. We're going to slide that right into the T slot. May need to push in a little bit just to get it past that edge. Now we're going to slide it to the appropriate measurement. It's kind of tough to see, probably, on camera, but it's going to give us 1-inch increments right down through here, through the eighth inch. This needs to go to 36 and 7/8.Once we have that in position, we're then going to tighten down our other screw here. Now, the tool has a built-in torque limiter, so as we turn it, you want to have three clicks. It's kind of just like a gas cap there.Something else I want to mention while we're looking at the bottom side of this, it's going to be hard to see later. When we put in our fit clips, there's going to be clips. These come down, grab the roof line of the vehicle, and that's what's going to secure our rack. You can see the rounded portion here. As that goes in, it's going to fit in the gap right here. Between the tab that sticks up and the tab that's flat, there's a little notch for it to slide in. That can be really tough to see when we're doing it underneath the roof rack system, but this will slide in. That's going to come up like that. Then as we tighten that screw, that secures that or pulls that in.We'll make sure that we've got that loosened up, and we're also going to make sure that we have loosened up the other screw we can see right here on the end. That adjusts our bracket up and down, so we'll leave that loose initially, and then we can tighten it down once it's on the roof line.Last thing we're going to put on before we put it on the roof line of the vehicle is going to be the foot pack. You can see the notch there. That's going to go right down on the bar. Slide that in. There's an arrow. You want that arrow facing outward. We'll click it in position. Once your feet are in place here, you want to take the rubber stripping and you want to fill in these gaps. We want a piece on this gap, on the gap between both of our feet, and then also on the opposite end. What this is going to do, it prevents wind from getting in there, which could cause whistling or noise while you're at highway speed.Now we can place our crossbar up on our roof line. Now just for reference on the front measurement, you'll be 7 inches from the back edge of our windshield to the front edge of our foot pack, and we're going to go 32 inches from the center of our front foot pack to the center of the rear. We're going to do this on both sides of the vehicle, just to ensure we have our bars square with one another.Now we'll open both doors. We can open our gray cover. That's going to allow us to slide in our slide clips, just like I showed you on the table there. Let's get that done on both sides.Now we'll start by tightening down the upper screw, and you can see how that lowers this down slightly. We just want that to give us kind of a level clip coming up to the side. Do that on both sides. Now we can switch to the middle screw. You'll notice as we tighten this up, the gap between the clip and the vehicle is going to decrease. We'll just tighten these up so they make contact. We're going to tighten them up from side to side evenly. If we just bring that up so it makes contact here and we do the same thing on the other side, it should keep our bars squared from left to right.As we tighten this down, you'll see our foot pad. It's going to come down and it's going to rest right down there on the roof of the vehicle. And again, just a little bit at a time going side to side.Now, once we have both sides nice and snug, we'll come back to our first bolt. We want to get that tightened down until our wrench clicks. Then we'll do the middle one. Want to just pop that cover closed over the top. Go over to the other side and make sure we have the same tension.Now we've got our covers to go in place. See they've got the two little hooks. We've got one right here, one right here. Those are going to fit right down on the attachment points. Then we'll click our cover right in place there, do the same thing on the other side.Now, to get our end caps in place, just want to get them started. You'll push up on this tab on the bottom. Let me just give it a firm push in, maybe a tap to make sure it goes all the way down into place.Now you're ready to attach your favorite accessory and hit the road, whether that's a roof-mounted bike rack, cargo carrier, maybe even a cargo box.That's going to complete our test fit of the Yakima Roof Rack System with the baseline foot packs on our 2017 Toyota Tacoma.
Average Customer Rating: 4.8 out of 5 stars (212 Customer Reviews)
These crossbars combine the strength of steel with an aerodynamic shape to create a heavy-duty yet quiet roof rack for your vehicle. Full-length bars maximize cargo carrying capacity and work with most clamp-on accessories.From start to finish, the folks at etrailer -- and I spoke to several people there, so it was a consistent corporate vibe -- were fantastic to deal with.
There were delays in getting my product that were on the supplier side and out of etrailer's control, yet etrailer folks kept me up to date and also worked on a customized solution.
My goal was to be able to carry my surfboard on the roof of our 2019 Hyundai Santa Fe to the beach more than 3 hours away. But the particular model we had had no existing racks, no recessed areas, nothing to fix racks to. Not even the dealer had a solution. I was sh*t out of luck.
But etrailer hooked me up. The racks did take me a while to put on, but most of that time was fine tuning to reduce “hum” while driving. I’m very happy with them.
Thanks to etrailer, I have gone surfing and can go surfing whenever I'd like to.
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
Follow the instructions, and you can't go wrong on the self installation
I've just recently installed this setup on my 2015 Toyota Camry.
etrailer - Shopping for this rack was fairly simple, and the shipping from etrailer was quick and reliable. I received the rack in 2 different shipments but they both arrived at the same time. etrailer made sure the all the contents were available. They also have several resourceful videos on their YouTube page, which was helpful while shopping for the rack and during a few trouble shooting items while I was installing.
Yakima Core Bar - Overall a quality product. Everything necessary was supplied, including a handy measuring tape and some very well written instructions. The fit is clean and very sturdy. The only qualm I have is that the hex hole in the large anchor bolts are a bit larger than the supplied hex driver. Toward the end of the installation, the tool was worn and ended up turning inside the bolt itself (not due to over torquing whatsoever). I ended up having to use a hex set I had in my toolbox to complete the installation because the provided tool was starting to strip out the anchor bolt. With that said, the kit is still a great kit that meets my expectations.
Wind noise is quieter than my OEM VW bars on my 2017 Volkswagen GTI. It's noticeable, but nothing extreme - I believe that's just the price you pay when adding crossbars to a vehicle.
Verdict - etrailer has definitely met my expectations, and the Yakima kit provided is a well designed kit that fits well!
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
As described! Quick delivery!
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
Great product great service
Very good product. The Yakama towers and cross bars feel very solid and appears to be high quality. Very easy install. Others have complained about the instructions, but guess I'm a visual person because the pictures all seemed very clear to me and the install was very easy. They do sit higher than I expected. After adding a Rhino Rack cargo basket, we only have about 4-5" clearance below the garage door.
Solid build quality and easy installation on my '21 Mazda CX-5.
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
These crossbars feel like they are well made and sturdy. It took less than 30 minutes to install with the Ridgeline Towers. I love the look of the bars! Can't wait to load the Kayaks up and get out on the water.
Well packaged and on time
Should include extra end caps just in case they fall off.
Roof rack fits and works as advertised. Over the phone customer support for sales and install directions were very helpful and thorough. Geoff is an excellent brand ambassador who goes above and beyond to fulfill customer expectations. I will definitely be shopping at etrailer for my future vehicle needs. Well done!
Timely delivery of my order, as usual! Easy to install on my 2015 4Runner. After I had the mounts ready and put on both bars, I installed the front one and fine-tuned it, the second took even less time then. I now have the ability to carry up to 3 kayaks, perfect! etrailer is a great company!
My experience with etrailer has been excellent. There was going to be a potential delay in one of the products, but their customer service promptly informed me, half the price of some of their competitors so can't really complain. In the end they got the part ahead of schedule and was able to ship in a timely manner. I will definitely keep them in mind for future purchases.
Very sturdy, well made. The assembly instructions are not too good but if you call Yakima they will provide additional instructions.
Customer service was excellent, they called me to tell me one item was backordered and how long it would be. Package was shipped with enough packing material. Install was pretty easy, some of the Yakima measurements in the manual are a couple inches off but no big deal. This will be used to carry a box for when the family takes trips. Can pile all the luggage up top and have more room in the car. I would recommend the Yakima corebar roof rack and etrailer! Their price was lower than 2 other sites I checked.
Roof rack parts were ordered correctly and shipped quickly.
I am thrilled this got delivered sooner than anticipated! It was quite easy to install once you started actually putting it together and measuring everything out. I like that this can easily be removed and installed onto the vehicle.
Very happy with the Yakima roof top rack kit for my 2017 Ford Edge with glass roof. The instructions were a little confusing at first, but after reading through them a couple of times while working with the product they became much clearer. The Yakima fit site was helpful as well. After the initial cross bar mounting measurements and set up, attaching and detaching the racks from the roof is a very simple process.
Wonderful service from Kimberly at etrailer.com. I had ordered a roof rack in December for I car I had on order. Ultimately I purchased a different vehicle more than 3 months later and the roof rack and mounting parts were not compatible. I had no problem returning the unopened products and just needed to pay the postage. Kimberly made the process easy and seamless, making sure to send the new Yakama cross bars and necessary parts. It fits beautifully on my new car and setup was fairly simple with video support and step-by-step instructions.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.