Will the Yakima Load Warrior Fit on My 2018 Toyota RAV-4?

Question

Question:

Will this fit on my 2018 limited rav 4?

asked by: Sean F

0

Expert Reply:

Yes, the Yakima Load Warrior # Y07070-74 will fit on your 2018 Toyota RAV 4 Limited. In addition, you can also purchase the Locking Brackets with SKS Cores for Yakima Warrior Series Roof Cargo Baskets - Qty 2 # Y07064 to lock your basket to the crossbars. In order to transport the Load Warrior, you will need a roof rack system. The roof rack system that you need will be different based on if you have a bare roof or raised factory rails on your vehicle.

If you have a bare roof, I recommend the following setup:
- Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 # Y00421
- BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06180
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06169
- (Optional for extra security - includes locks for both the bars and the basket) Same-Key Lock Cores # Y07206

If you have raised factory rails, I recommend the following setup:
- Yakima CoreBar Crossbars - Steel - Black - 50" Long - Qty 2 # Y00421
- TimberLine Towers for Yakima Crossbars - Raised, Factory Side Rails - Qty 4 # Y33TR
- (Optional for extra security - includes locks for both the bars and the basket) Same-Key Lock Cores # Y07206

With either of these crossbar setups on your 2018 Toyota RAV-4, you will be able to attach the Yakima Load Warrier.

expert reply by: Bob C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Answer 8

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Will the Yakima Load Warrior Fit on My 2018 Toyota RAV-4?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching