To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima 60" JetStream MD - Black:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2013 Mazda CX-5, we're going to be test fitting the Yakima CoreBar Roof Rack System consisting of part numbers y00421. These are the Yakima CoreBar cross bars, 50 inches long, part number y00148. These are the SkyLine Towers for the Yakima cross bars for fixed mounting points, part number y00233. These are the landing pads which the SkyLine Towers will sit on. Now we already have the front one installed. The bars themselves have a nice aerodynamic shape to them and that's going to cut down wind noise and drag while you're driving.
They're constructed of steel and they have a carrying capacity with the other bar of 220 pounds. That packs a little bit of extra weight that you can put on top of your car. Although you want to double check to make sure your car can withstand that weight. Let's go ahead and show you how the rear one goes on. We'll start with the landing pads first, which these 2 pieces here are the landing pad. You open up the cover here and we'll start our rubber pad on the bottom, which just snaps in to place.
Once that's together, we'll take our bolt, our washer, and plastic washer, put them through the top and install it onto our fixed mounting point on our Mazda. Okay. You'll see the fixed mounting point towards the rear here. We'll kind of line it up, and then we'll get our Allen tool and tighten it down. Once you take the roof rack and CoreBars off, you can take this piece here, pop it into place, and you can leave these on at all times. Next we'll go ahead and assemble our SkyLine Tower System for the bars.
Now, this plastic piece here, and this piece that will fit along the bar itself, that comes with the bar. We'll go ahead and pop that plastic piece onto the top of our tower. We'll make sure that our bracket here's facing the right direction, and we're going to install that to the screw at the top of the tower here. Then take our included tightening tool and tighten it down to the tower itself. Now the best thing about this tightening tool is, you're going to hear 3 or 4 clicks once it's tightened down, therefore you know you haven't over tightened it, or under tightened it.
Slide this on to our CoreBar. Now before we actually took some measurements, and this is kind of a trial and error part of it. You want to measure from the edge here to the end of the bar, and you want it to be equal on both sides when you place this onto your vehicle. We'll take our measurement real quick. All right. Then we'll make our adjustments as needed. Now that we have everything adjusted, we'll tighten this center screw here until your hear those pops. Do this on both sides. All right. Now we'll finally close up our clamps here and secure it down. You can take out these plastic pieces here and replace it with the Yakima Same Key System for additional security to lock your roof rack to your vehicle. Finally, we'll put on our end caps, and I think we'll be good to go. There you have it for the Yakima CoreBar Roof Rack System on our 2013 Mazda CX-5.
Average Customer Rating: 4.8 out of 5 stars (158 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.Fit our Subaru Forester perfectly. Install was a breeze. For the money I wish they came with the core locks.
Very nice quality towers. Very heavy duty! They have a cool "snap" on / off mechanism for quick removal and installation.
Parts arrived as advertised for the model
Car so happy to find the right fit
But super pricy for some plastic.
You guys provide great products and excellent customer service.
Thanks
Easy to install. It probably took 45min. I bought them for my 2024 Expedition to haul a canoe. I have not done that yet but I expect no issues.
At first, a little tricky to install, as the kit comes with hardware for a variety of applications (different length/size bolts, etc). But after a quick look at the directions and identifying which bolt to use for my car, install was a breeze. I love this Yakima setup because I can remove the bars/towers and leave the landing pads with a cap. Makes it great for taking the canoe out on weekend trips, but not taking the fuel-economy hit during the weekday commute to work.
These crossbars were easy to install and adjust. Be sure to get all the pieces you need. There is no mention of the Landing Pads necessary to use these.
product was just what I needed The folks at etrailer were extremely helpufl!!
Yakima SkyLine Towers are well-designed and well-executed. They easily fit into the Yakima Landing Pads and form a tight fit when closed. And they also fit nicely into the Yakima JetStream Crossbars when following the Yakima instruction manual and various YouTube videos. I did run into a snag at first where I found the rubber seal on one SkyLine Tower getting caught on the JetStream Crossbar track, but after that I was careful not to let that happen with the other towers.
I find the appearance of the Yakima SkyLine Towers to match their level of quality in materials and design.
Love it! We've made several long trips with full luggage loads.
Great company. Fast delivery.
Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.
Easy to order and quick to ship. Took a bit of time to get these installed correctly so they fit just right.
1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.
Great! Easy to install!
Great service and great staff. They will have all the technical information you need.
These really look so much better then the factory racks! Easy to install. Easy to order! Great product!
SIMPLE & EASY1
Very sturdy hold with a matte look and fine textured feel. Very light making for easy install.
High quality bars that were easy to install to the Skyline towers and work great with our Yakima JayLow kayak carriers.
I got my new landing pads the day they said it would arrive. The pads were in their original yakima packaging, properly packed and overboxed. I work for a logistics company so I know the importance of getting product to a customer on time and exceeding their expectations. Very well done etrailer.com! The landing pads is just part of what I needed, and with the discount code included for my next purchase, I will be back. Thanks again.
They work as advertised and have been holding up great.
I had a need for the Yakima Crossbars and Towers for my Expedition. With a short delivery time frame, I contacted etrailer knowing they are the best. Justin B. worked with me to get the correct parts then made sure that the products arrived in time, it did. The Towers, Bars and overall excellent customer service from etrailer made for a great experience. Thanks again for exceeding expectations etrailer!
Simple installation to vehicle with supplied hardware and tools. Once these bases are installed to the vehicle, it is simple for a single person to install and remove crossbars and towers in just a couple of minutes.
All aspects of the purchase and installation were great. Based on the information provided on the etrailer.com website, I had a high level of confidence that I was purchasing the correct product(s) for my vehicle. The installation was relatively simple and straightforward and the rack is rock solid on my roof. It appears that I did a great job of following the directions :)
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.