To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.
Features:
Yakima HD Crossbars - 55" Long - Black - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. It's Angelina here etrailer.com. And, today we are looking at our Yakima roof rack system with baselines towers and jet stream crossbars, here on our 2021 Honda accord. On your Honda accord, If you want to carry around a safe bike racks or roof basket, but you don't have a hitch you can pick up a roof rack like this from Yakima. And this works for naked roofs. Just like what we have here on our car.
It has a custom fit hook that way when you install it and tighten it down, you can even slam your doors on it without having to worry about it denting or scratching your car. This roof rack system comes with jet stream crossbars which I really like since they're Yakima's aerodynamic crossbar options. They come with T track channels, and this can be used with your T-track accessories at mount straight into there. And that don't need to be clamped around, which I like since that allows you to use the full crossbar space. This has 165 pound weight capacity.
So, when you do have this loaded up also make sure to follow whichever is lower whether it's your crossbar capacity or your brief weight capacity. These are the 50 inch crossbars here on our accord, which I like cause they have minimal overhang with a smaller car like this is nice because then you're less likely to bang your head against longer crossbars, which I've learned the hard way. So, we'll take some measurements. This has an overhang of an inch from the tower to the end of the bar before the end cap but you can also pick up longer bars, If you want that overhang. Let's also take some measurements for clearance purposes.
Your distance between the bottom of the bar to the top of the roof at the closest point is three and five eighth. As for the height of the roof rack from your roof it sits at four and a half inches. These are baseline towers with the option to lock them. So, if you purchase four locking cores, you can pop those in and make sure that they are key to like with your other Yakima accessories. You are limited by how this system is measured.
So, you do get a crossbar spread of 32 inches. So, just keep that in mind when you're thinking about roof baskets or cargo baskets. So, I already installed the front bar and we're gonna install the rear bar together. Now, what you first have to do is set up your crossbar. You have to take out the strip that is inside and then cut it later to fit, Once you have your towers installed. And from here, you have to install your towers. You're going to first installed these steel plate that slides into your crossbars. So, on underneath your tower there will be this tab you have to open. So, open that up. That tab is right over here and that will allow you to tighten it down with the included tool. So, just put that steel piece right on that bolt and then tighten it down to attach it. Just make sure it's loosely attached loose enough that you can still slide it into the crossbar but tight enough, that is attached to your tower. And once that is in place you can then slide your tower onto your crossbar. There you go. Here on your crossbar, You're also going to loosely tighten it down but just enough so that it doesn't come off your crossbar. We'll also check it later to make sure you have it in the right position before you tighten it down fully. Now, your fit kit comes with different foot packs. Now, you have to make sure you're using the right foot back for the right cross bar. Sometimes, it's different for the front and the back. Here on the back, we have a different size from the front. So, we're having this on the rear crossbar, just pop it onto your tower and you can do it with the tower on or off. I like to do it with it on the crossbar just so we get faster. There's an arrow underneath the foot pack and make sure that it's facing the outside of the crossbar or away from your vehicle. Now, you're gonna hook your hook onto your tower. Now, see that tab inside your tower. You're going to have that inside and that's what your hook attaches to and then down. So, once that's in place, you can tighten it down just enough to keep it in place but loose enough to attach your car. From here, you're gonna put it on your vehicle. And I recommend having a friend help you grab the other end as you put it on your roof, just like that. And then place it loosely, before you take measurements to find out it's exact spot. The instructions on your fit kit will have instructions for where you will place the towers. Here on our 2021 Honda accord for measuring eight inches from the end of the glass to the front of our tower. And from that front tower, we're going to measure 32 inches from the front of the lead crossbar to the front of the rear crossbar. So, this needs to be 32 inches away. So, I'm going to move my tower over a little bit towards the rear. Once your crossbars are 32 inches apart to the edge of the crossbar, right over there, you can then tighten down your tower underneath, and this will tighten down the hook and keep turning until it clicks twice, like a gas cap. There we go. Once you have it tightened down, you can then put that lid into place and then put your front cover on make sure to hook it in from underneath right there and it pops into place. And that's it for the install. My final thoughts about this whole system is I do like how it is a nice streamlined look on my vehicle. It has minimal overhang and it looks very sleek and minimalistic. One thing though it was kind of difficult to get it all lined up. So, be sure to double check your measurements and make sure you follow the instructions or else just a little bit of a change here and there may make it a lot more difficult to install it tightly and securely. But, once you have it all down I think it's a great roof rack that gives you the opportunity to carry around all that you need for your adventures on your Honda Accord. Also, I like to use my Moki doorstep just to give me a little extra height and leverage as I get up there. And that was in look here at our Yakima roof rack system with baseline towers and jet stream crossbars, here on our 2021 Honda Accord..
Average Customer Rating: 4.8 out of 5 stars (227 Customer Reviews)
Heavy-duty crossbars mount to Yakima towers to create an aftermarket roof rack. Top and bottom channels let you add channel-mount accessories. Tie-down points in endcaps let you easily secure cargo.
Works perfect for our SUP with the tie down loops. Great for building materials as well. Looks great as well.
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
I ordered the Yakima roof rack for a 2019 Hyundai Ioniq. I went with the heavy duty one for extra strength but it is quite a bit thicker, likely increasing wind noise. So I might have chosen the aerodynamic lighter weight one if I was to do it again. Also, I needed to get larger bolts for my kayak holder to get around the crossbar. The instructions and video on website were very helpful but they did not explain well how to adjust the toe and pitch. For the toe adjustment, you have to push the metal post with the tool before tightening. That was not obvious. For the pitch, it helped to do that once the towers are attached to crossbar. Then you can tilt tower while cross bar is laying flat (upside down). I ended up having to add tilt on both front and back crossbars for them to be flat when installed. Website said only front one would need to be pitched. I am very pleased with the look and sturdiness of the product. My Hyundai Dealer had zero options for this car.
etrailer was a great place to order, quick and easy. Yakima products however are over priced and overly complicated.
Follow the instructions, and you can't go wrong on the self installation
You sold me used equipment at new prices. What a rip off. Your company is a joke! No worries, you’ll not have to worry about screwing up another order for me in the future. I’ve learned my lesson not to deal with your customer service.
These adapters were easy to install and made my system fit together nicely.
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
The design of the connection seems a little sketchy to me. Hopefully I'm wrong and the design engineers have it figured out. etrailer's selection process, delivery ann installation help both online and on the phone was excellent
The customer service in ordering theses par tea was amazing!! I spoke with a wonderful specialist named Kate F, and she was super helpful and patient answering all my questions and helping me make sure I had the correct parts I needed for my type of car. The bars are very sturdy and have proven very worth the money!!
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
I had a difficult time identifying whether these were the correct adapters for the rack towers that I was purchasing to fit my tracks but that has more to do with yakima doing everything a-la-cart instead of having kits that include everything you need if I hadn't already had the HD bars on my other rack and wanted to be able to transfer them to this rack I probably wouldn't have went to this expense because I think they are overpriced.AS far as etrailer is concerned I always receive great service and products and they are always well packaged and never damaged by poor delivery care and always fast delivery speed.
Your service is nothing short of excellent! Thank you
Great product and even better was the service with etrailer! These guys make it happen and delivery was super fast. Thanks for a fantastic experience, will be a return customer.
Yakima HD bars 60”
2018 Ford Expedition
Solid build quality and easy installation on my '21 Mazda CX-5.
The Yakima products are doing great. Just got home yesterday from a 18 day trip using them in Michigan's upper peninsula. Love them. Great products. Thanks again.
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
Well packaged and on time
Easily supports the RoofNest! The Customer Service with Roger was Excellent!
Required for Yakima HD crossbars using timberland tower system.
Great company. Fast delivery.
They fit perfectlly and solidly on my 2021 Toyota Highlander. The instructions are clear and entirely accurate.
etrailer installation videos were very helpful in selecting the product and first installation, although in practice, minor adjustments to method were required. Now after more than a dozen set ups, mounting the crossbars takes 15 minutes, and taking them off, 10. The system is well made, and when mounted, precise, strong, and reliable. Expensive perhaps compared to alternatives, but well worth the money. Used to carry a 50# sailboard 40 miles to the beach on weekends. ('11 Honda Fit)
One minor shortcoming: rubber sheet glued to base clips where they touch the car body have torn and moved sideways 1/16", but expect will be easily replaced with readily available 1/16" sheet rubber (e.g., shower pan liner) when the time comes.
Used in rain at least once, (sustained 60mph), with no leaks.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.