To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Inno Square Load Bars - Black - 54" Long:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today in our 2016 Ford Focus we're going to be test-fitting the Inno Aero Crossbar roof rack system, consisting of part numbers INXB130-138, these are the Inno Aero Crossbars 51 and 54 inches long. Part number INXS250, this is the Inno through feet for the Aero crossbars. And part number INK528, which is the fit kit for the Ford Focus. The Inno aero roof rack system is great for carrying a wide variety of accessories on your roof while freeing up space inside your vehicle. Both bars have a combined carrying capacity of 120 lbs, although you always want to double-check with your vehicle's manual to make sure it can withstand those weights. With the end caps, once you remove those, you can see it has a rubber strip in the center here.
Now that combined with the aerodynamic shape of the bar is going to cut down wind noise and drag while you drive. Also, since it has this rubber strip, you can use this with t-track accessories. Instead of having to cut the strip to length and put it around them, you simply just push it down and slide your accessories into place. Also, on each end with our feet here, they are lockable, so once you install this onto your roof it's going to be secure to your roof as well. Now that we've gone over some of the features of this roof rack system, let's go ahead and show you how it installs. We have our rear bar partially assembled on our table here, and next we'll take our through foot and put it onto the end here. We go to the end of our bar here, and slide this piece here all the way out so that bracket is sticking out.
Then we'll take our inner bracket, which comes with our foot kit, we'll push that into place like so, and it will fit properly. We'll push it back in til it gets to that point, then we'll take this top portion of our foot, we'll stick it into this portion here, they'll fit in together like so, and then you push them into place. The next step is we'll take a measurement to get the proper spread between our feet. Measure it out . looks good. Then we'll take our included Allen tool and tighten down our bolts in the center here.
Get that nice and tight. Next we'll install our fit kit, which is going to consist of the rubber pad here and our clamp. These are numbered, so always double check and make sure that they're going to the proper foot. Looking at the bottom of our rubber foot, we can see that it matches up with our foot here. That'll just push into place. Finally, we'll install our clamp.
Remove the screw at the end here, place our clamp on, and just reinstall the screw loosely, and now we're ready to set it on the roof of our vehicle. With the bar set in place, now we'll measure for our rear crossbar, and that's going to be from the center of our doorjamb to the center of the bar. You'll find this measurement in our instructions. It actually looks pretty much on spot there. Repeat this on the other side. With our measurements done, now we can start tightening them down. We'll get them snug up against the door first, then we'll tighten them down completely. Once you hear those clicks, it's completely tightened down to your roof. Our next step is to insert this foam piece here to the end to take up the space underneath to help out with wind noise and drag. Then you would cut it to length. But for demonstration purposes, we'll have to leave that out. Our final steps are going to be to install our end caps to our bars, which just push into place like so. Then our locking end caps, which insert like so as well. Once these are installed, we can install our accessories and hit the road. There you have it for our Inno Aero Crossbar roof rack system on our 2016 Ford Focus.
Average Customer Rating: 4.6 out of 5 stars (368 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.This is the first time I’ve installed anything like this and it went so much better then I thought it would!! I have a cargo basket
I’ll install later. Very highly recommend this!! etrailer was
Easy to work with and they shipped it out quick and arrived in great condition!!
Perfect fit for my car, well packaged and detailed instructions. Easy order process and fast shipping. Will buy from etrailer again. Thank you
Worked great! Held up a roof top tent all summer. No bending or damage from use.
This model is not the most stylish and sleek roof rack but its sturdy and made with quality materials. Easy to set up and its even easier to put on the vehicle and take off the vehicle. I only put the rack on my Ford Focus when I go kayaking. Great bang for buck!
Work exactly as described and after a year, still in great condition.
I am writing this review in the context of an owner of a Yakima roof rack system with round crossbars from a vehicle many vehicles prior to the 2021 Hyundai Tucson on which I just installed an INNO roof rack system with the INSUT Feet, INNO NB137 crossbars and 2 INNO INA391 roof bike racks. The INNO crossbars are rectangular in profile, rather than round, but with a grooved top that mates with the INSUT feet, the crossbars should stay firmly put where they are set in the feet. They do not weigh much, but feel pretty solid given their light weight and relatively thin metal walls. One change I would suggest to INNO is to put a factory mark on the center of the crossbars rather than supply a flimsy little decal for the user to measure and place on the crossbars. I never bothered to try to exactly center the round crossbars on my Yakima system, but it is important, at least on the naked roof of the 2021 Tucson, to properly space the feet from the center of the crossbars. I will probably eventually just put a dab of white touch-up paint to mark the center point.
Fantastic customer service.
Andrea is great.
Thanks for your help!
Pretty bendy, could be a bit more solid. But they do the job
Easy to install and very sturdy. Might be more expensive than others on Amazon but trust me spend the money on these.
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
Good quality rack system, easy to assemble and install, works well, looks good, fair price, I'm very satisfied with this purchase. I appreciate the guidance I received from William B. at the beginning of my search for a roof rack to carry a canoe on my 2015 Honda Civic. Two thumbs up for this purchase.
Easy to install and have worked great so far!
Package arrived quick one problem thou blue box inside big brown box which held the roof rack bars was damaged and when i opened it up the rubber end caps are missing is it possible u can send them to me i would appreciate it Thank you
Super easy to install and remove. Lock feature is great
Works well, has stayed attached with no issues. We've used them (plus the bars) to keep a canoe and a rocket box on the car at different times throughout the year (not at the same time, it's on a tiny golf).
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
My order just arrived this afternoon and I have not yet looked at everything by I am upset over the rails falling out of the box as it is damaged. I will be looking to make sure all parts are contained but so far not thrilled with the condition of the materials as delivered.
Perfection!!!
Perfect fit.
Worked great! Traveled with a carrier on these racks from Chicago to Seattle. No issues, would buy again!
I have two standup paddle boards that literally live in the racks, and have since day one.
The racks are awesome.
Really great value! No need to spend a lot on Thule. Even those these are square shaped I actually don't hear much road noise. Besides, you're gonna have music playing or riding with the windows down anyway. I would definitely buy these again.
Very noisy, had to take them off when not in use.
Waited till I put the new rack to work before review. Used it the first time today and it worked Great. Seems like a very durable rack system. Love that everything is rubber coated so it doesnt scratch the paint on your car. Installing instructions where a little confusing but found YouTube videos from etrailer on how to install exact rack system.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.