Roof Rack Recommendation for a 2001 Ford Escort 4-Door Sedan

Question

Question:

I am having trouble finding a clear answer if I can use Yakima Q towers on my 2001 Ford Escort 4 door sedan. I have seen clips available for the zx2 and earlier years of this make and model, but not my year. I was wondering if you could help clarify this for me.

asked by: Mike H

0

Expert Reply:

Yakima does not have a roof rack solution for a 2001 Ford Escort 4-door sedan, but Inno does. You can use the following parts to add a roof rack:

Inno Square Load Bars, # INB117
Inno Roof Rack Support Feet, # INSUT
Inno Roof Rack Fit Kit, # INK294

expert reply by: Michael H

0

Answer 1

The Thule DockGlide Kayak Carrier with Tie-Downs #TH896 will fit crossbars up to 4" wide x 1-1/2" tall so it will install just fine on your 1-1/4" square crossbars for your Malone MicroSport trailer. These have a weight…

view full answer...

Answer 2

Yes, I checked with Yakima and the Yakima BigCatch #Y04091 is a confirmed fit for the factory crossbars of your 2010 Toyota 4Runner.

view full answer...

Answer 3

For your 2005 Subaru Legacy Outback Wagon, I recommend using the: -Inno Square Crossbars #INB117, with the feet #INTR, and the fit kit #INTR104. This roof rack will easily and quickly attach your factory roof rails and provide an attachment point…

view full answer...

Answer 4

Thank you for all of the information! We do have a solution for you to carry a heavier fishing kayak, like the Old Town Predator PDL or the Hobie Outback, on the roof of your 2018 Subaru Outback Wagon Touring Edition. For your application I…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof…

view full answer...

Answer 7

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 11

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the…

view full answer...

Answer 12

The Rhino-Rack Heavy-Duty Roof Rack Roof Rack have specific C-channels that are designed to fit specific Rhino-Rack Heavy-Duty accessories, like the Rhino-Rack Hi-Lift Jack and Shovel-Holder Brackets #RRRCB-RSHB-RJHB as an example. That's…

view full answer...