What is Needed to Mount Inno Feet to 2019 Mazda CX-5 With Bare Roof

Question

Question:

I have 2 long Thule cross bars. My 2019 cx5 that I now drive has a sunroof and no rails. I want to use my Thule bars to carry my two very light weight Hornbeck kayaks 10 pounds each and would prefer not to install rails. Does this product give me everything I need to accomplish this? INSUT

asked by: Bill Q

0

Expert Reply:

For your 2019 Mazda CX-5 with a bare roof, you will also need a fit kit to mount the Inno Feet for Square Crossbars # INSUT.

Fit kits are designed to conform to specific vehicles and give the feet a mounting point, which is why they are needed, and the correct kit for your '19 CX-5 is the Custom Fit Kit for Inno XS200, XS250, and INSUT Roof Rack Feet # INK497.

expert reply by: Kyle S

0

Answer 1

For you older version of the Thule Hullavator 897XT the only way to attach it to the top channel of aero bars is with the part #TH56JV. The #TH24BH is the channel adapter for the current version of the Hullavator part #TH898.

view full answer...

Answer 2

Since your Yakima Crossbars have 1" thick bars, and the inner diameter of the Replacement Roller #753-3006 is 1", this will work with your rack just fine. This part is actually supposed to be a replacement for the Thule Hullavator…

view full answer...

Answer 3

In order to install your older Thule Hullavator TH897XT the Thule aero WingBars, you are correct that an M6 x 30 is needed, as well as the nut and a washer. The exact parts are as follows: - Replacement Socket Head Cap Screw - M6 x 30 #TH919063054 -…

view full answer...

Answer 4

No type of adapter will be necessary to use the Thule Hullavator #TH898 with WingBar Load Bars, as they will fit into the channels of those bars. For your 2011 Audi Q5 you can install the Thule WingBar Crossbars #TH711220 (Black) or #TH711200…

view full answer...

Answer 5

According to the instructions for the Thule #TH897XT Hullavator, the kayak carrier is compatible with Thule square crossbars, Yakima round crossbars or Thule AeroBlade and WingBar crossbars that have the channel running across the top. It won't…

view full answer...

Answer 6

Yakima has their JetStream roof rack part numbers #Y00428, #Y64AR, #Y39AR that fit the flush rails of your 2022 Mazda CX-5. This does connect to your roof using the door mounts though but there isn't a different style of rack available.

view full answer...

Answer 7

I'm not quite sure what you're asking, but let me see if I can clear some things up for you. The Thule Hullavator Pro Kayak Roof Rack and Lift Assist w/ Tie-Downs #TH898 is compatible with both the Inno Crossbars #INB137 you were looking at…

view full answer...

Answer 8

The old Thule Crossroad 450 Feet were compatible with the Thule square crossbars that were a whole all the way around. The new Thule SquareBars have a slit in the bottom so they only fit the standard Thule feet and aren't compatible with the…

view full answer...

Answer 9

So your Thule Hullavator carriers 897XT weigh right at 20 lbs per carrier. So you'd have 40 lbs of carrier and 120 lbs of kayaks. That would mean you'd have 5 lbs of capacity to spare and would be technically safe. Since Thule now uses a…

view full answer...

Answer 10

Yes, there is a roof rack that will fit your 2023 Mazda CX-5. This mounts directly to the side of your roof without drilling and has more than enough capacity for a bike rack. You will want the roof rack by Rhino Rack and it includes the following…

view full answer...

Answer 11

The older style of Thule square bars are no longer made but I do have a solution for you. The Inno square crossbars are the exact same dimensions and will fit your Thule feet so you'd want the #INB137 for a set that is 54 inches long. The new…

view full answer...

Answer 12

Yes, you can reuse your Thule SquareBar item #TH712300 with your 2023 Mazda CX-5 but they will be 3" shorter than the item #TH712400 that is recommended to be used. Since you'll be reusing the same bars the Thule Hull-a-port carriers will…

view full answer...

What is Needed to Mount Inno Feet to 2019 Mazda CX-5 With Bare Roof

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching