Parts to Install Inno Square Bar Roof Rack on 2023 Chevy Traverse Raised Rails

Question

Question:

I have an older set of square crossbars from Inno and I'd like to use them to get a roof rack on my 2023 Traverse with raised rails. What other parts do I need?

asked by: Kristen

0

Expert Reply:

The Inno square bar roof rack that fits the raised rails on your 2023 Chevy Traverse includes the following parts:

- 54" Square Crossbars # INB137
- Inno Feet # INFR

As long as your crossbars are at least 54" you just need the feet and you're good to go!

expert reply by: Jon G

0

Answer 1

I went out into our showroom and measured the dimensions of a set of discontinued Thule square load bars and found that they are 7/8 of an inch by 1-1/4 inches. This is identical to the Inno square bars like #INB137.

view full answer...

Answer 2

The Buyers Products Mud Flaps #337B1018LSP are considered a universal fit and so long as you have enough room to mount them, they will fit on your 2019 Chevy Blazer. The mud flaps are 10" wide x 18" tall x 1/4" thick so you…

view full answer...

Answer 3

For your 2015 Ford Fusion I do recommend the Inno roof rack because it's a great value. It will perform just as well as other options, but at a lesser cost. The correct fit for your '15 Fusion is the following: - Inno Aero Crossbars…

view full answer...

Answer 4

For your 2015 Toyota Tacoma Yakima has a round bar roof rack that is a confirmed fit but it uses the Baseline towers and not the Skyline towers so you would need the part #Y00409, #Y28TR, #Y03536, #Y06125, #Y06128. This is a 58 inch bar setup and…

view full answer...

Answer 5

We have a customer who was able to install the Draw Tite hitch part #DT54YR on their 2023 BMW X1 with the M Sport package but they did say it required some modifications: I had to trim the fascia, rear plastic sensor housing, heat shield. The…

view full answer...

Answer 6

Congrats on the new car and thanks for the picture! The Lockrack Adjustable XL Watersport Carrier item #LR54FR fits most aero crossbars on the market including factory ones. Looking at yours I would say this carrier and its clamps will work great…

view full answer...

Answer 7

We offer a number of roof racks for the 2011 Hyundai Tucson with panoramic sunroof. The racks that are compatible with your exact version of the vehicle will depend on its roof style. The link provided will take you to our fitguide page for Tucson…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

To add a roof rack to your 2022 Dodge Durango with no rails, I recommend the roof rack by Yakima which includes the following parts: Yakima BaseLine FX Roof Rack for Naked Roofs - Aero Crossbars - Black - Qty 2 item #Y39UV BaseClip Fit Kit for…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Your 2020 Chevy Traverse is prewired for a brake controller. Instead of a connector, there are 4 blunt cut tow package wires located under the dash below and behind where the headlight switch is located. These wires will directly connect with the…

view full answer...

Parts to Install Inno Square Bar Roof Rack on 2023 Chevy Traverse Raised Rails

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching