Which Torklift Glow Step for Bumper Height of 32 inches

Question

Question:

How do you know whether to order 3 or 4 steps? We have a 2016 Arctic Fox 996 truck camper. From the top of the bumper to the ground is 32 inches. Thanks!

asked by: Lee L

0

Expert Reply:

For your bumper height of 32 inches you'd want the 4 step version part # TLA7844 as it has a bracket height of 35-3/8 inches.

The 3 step version part # TLA843 has a bracket height instead of 27-7/8 inches so it would not be an ideal fit.

expert reply by: Jameson C

0

Answer 1

It is too small of a space to fit the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375lbs - Black Bracket Item #TLA7834 but you can instead mount it to the bumper of your camper like in the attached picture.

view full answer...

Answer 2

If you're having trouble getting access into the bumper when installing the TorkLift GlowStep Stow N' Go Scissor Steps part #TLA7834 you'll simply need to drill an access hole large enough to fit the bolts through and then you…

view full answer...

Answer 3

The bracket on the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear - 4 Steps - 375 lbs - Black Bracket #TLA7834 has holes spaced 9-3/4" apart horizontally and 2-1/2" vertically. The bolt holes are 3/8" in diameter.

view full answer...

Answer 4

I spoke to TorkLift about the issue you're having with the TorkLift GlowStep Stow N' Go Scissor Steps part #TLA7834 and they informed me to inform you to tighten the hinge tension on the side that's sagging. I have attached for you below…

view full answer...

Answer 5

The TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7834 only comes in the silver color with the black brackets. The overall folded dimensions are 14" High x 23-1/4" Wide x 11" Deep which includes the bracket and…

view full answer...

Answer 6

The Torklift steps part #TLA7834 would be your best option. These steps have a height of 35-5/8 inches from where they mount down to the ground when folded out so this would match your 35 inch dimension perfectly.

view full answer...

Answer 7

The Brophy Camper Scissor Steps - 4 Steps in aluminum, #AS04 has a shipping weight of 21 lbs. The Brophy Camper Scissor Steps - 4 Steps - Steel, #SS04 is 34 lbs.

view full answer...

Answer 8

Depending on where you wanted to mount the Aluminum Scissor Steps, #AS03, you would use the included mounting bracket, which you can see in the fourth picture on the product page. Click on it to enlarge the picture. The bracket attaches to your…

view full answer...

Answer 9

The Brophy Camper Scissor Steps for truck campers, #AS04, are intended for an entry height of 31" to 40". If your camper door sets within that 31-40' range then yes this will fit your rig. Please see attached image for measuring points…

view full answer...

Answer 10

The bracket of the Aluminum Scissor Steps #AS04 that you referenced stays attached to the camper, but the steps themselves get removed while traveling. Check out the review video I attached for these steps as well.

view full answer...

Answer 11

I may have different installation method for you, but there is not an extended bracket made to push the TorkLift GlowStep Stow N' Go Scissor Steps w/ Landing Gear #TLA7843 away from your camper to clear your bumper. It may be possible to have a…

view full answer...

Answer 12

The TorkLift GlowStep Stow N' Go Scissor Steps #TLA7844 is going to extend out roughly 38 inches from where it installs. I say roughly since it's a scissor step and how far the steps extend changes the distance they stick out.

view full answer...

Which Torklift Glow Step for Bumper Height of 32 inches

Product Page this Question was Asked From

Continue Researching