MORryde StepAbove RV Steps for 27-3/4" to 30-1/4" Wide Doorways - 3 Steps

MORryde RV and Camper Steps

Sturdy RV steps adjust to rough terrain, eliminating the springboard effect and providing a wobble-free step into your camper. Easily detach for parking in a tight spot. Fits a threshold-to-ground height between 34" and 36".

Features:

• Entry steps make it easy to climb in and out of your travel trailer or 5th wheel
  • Easily fold down for use and fold back up for travel
• Triple steps mount, stow, and lock into place behind the entry door
  • Keeps the steps protected from the elements
• Detachable so you won't get locked out if you park in a tight storage lot where you can't fold the steps down
  • Just remove pins from hinge plate to disconnect steps so you can access your door
• Stable design is bounce- and wobble-free
  • Legs extend and individually adjust for maximum ground contact, even on uneven land
• Safety features provide traction and reduce the potential for slipping in wet conditions
  • 10-5/8" Deep top step provides a bigger surface area for your foot when exiting the camper
  • Textured step surface and non-slip tread tape help keep you from slipping
• Lightweight construction makes lifting and lowering the steps virtually effortless
  • Aluminum step platforms are rustproof and scratch resistant
  • Powder coated steel frame resists corrosion
• Pre-assembled steps come with mounting hardware to ease installation
• Made in the USA

Specs:

• Application: travel trailers and 5th wheels
• Entry height (from ground to threshold): 34" - 36"
• Doorway width (from inside flange to inside flange): 27-3/4" - 30-1/4"
• Step dimensions: 23-1/2" wide x 8" deep
  • Top step depth: 10-5/8"
• Mounting bracket dimensions: 26-1/4" wide x 3-3/4" tall x 10" deep
• Height (in travel position): 40"
• Drop/rise: 9"
• Leg extension length: 1" increments for a total of 13"
• Weight capacity: 500 lbs
• 1-Year limited warranty

Why Fold-Down Steps are Right for You

If you've ever stepped into a camper that has standard metal steps, you've probably felt that scary springboard effect that makes you reach for the handle. That bounce occurs because those pull-out steps never touch the ground. Fold-down steps have adjustable legs that steady the steps on the ground, so you can feel safe using them. Also, fold-down steps store behind your camper door, which means they aren't left out in the elements to rust or warp like factory steps.

MORryde StepAbove vs. Lippert SolidStep

But what makes these MORryde steps different from other fold-down steps, like the Lippert SolidSteps? The StepAbove has a couple advantages over the SolidStep.

First, the MORryde steps can be detached when you need park your camper in tight spots. If you have to park close to another vehicle in a storage lot, for example, there might not be enough clearance to deploy your steps. With SolidStep, this means that you can't deploy the steps and now they are blocking your entryway. MORryde steps can be easily detached by sliding the pins out of the floor hinges, which allows you to lift the steps out of the doorway so you can slip inside if needed.

Second, unlike the SolidSteps which have a solid backplate on the top step, the StepAbove has no backplates blocking the gaps between each step. This makes it easy to sweep the steps free of dirt and debris before folding them up in your doorway, so you aren't stuck cleaning up your entry after every hike or trip.

Will MORryde StepAbove Entry Steps Work for You?

Fold-down steps are typically installed on travel trailers and 5th wheels. The fold-down steps from MORryde install inside your camper's door frame and lift up to latch into the doorway for storage. To ensure that you choose the correct size for your application, follow these 3 easy steps:

Step 1: Measure the Entry Height

Measure from the doorway threshold on your camper to the ground. For these steps to work, you will need an entry height between 34" and 36".

If you find that you have a smaller or larger entry height, there are other step assemblies that fit entry heights ranging from 25" to 42". (See table below.)

Step 2: Measure the Doorway Width

Measure from the inside of your door flange to the inside of the door flange on the opposite side. Your doorway will need to be between 27-3/4" wide and 30-1/4" wide for these steps to work.

If it turns out that you have a wider or narrower doorway, there are other step assemblies that fit doorways ranging from 21-3/4" wide to 30-1/2" wide. (See table below.)

Step 3: Measure the Threshold

Measure the rise of your threshold. The distance between the floor and top of the threshold must be between 5/8" and 3/4". If the height of your threshold is outside of this range, the doors may not close properly.

To allow room for the hinge plate, there must be a gap of at least 3/8" between the threshold and the bottom of the entry and screen doors. If the gap is too narrow, the doors may not close while the steps are down.

Find the Step that Works for You

If, after taking your camper's measurements, you find that these steps will not work for you, use the table below to determine which part number you need.

*Strut-assist model

STP-209 Second Generation MORryde Step Above Fold-Down Steps for 27-3/4" to 30-1/4" RV Door Frames - 9" Drop

Installation Details 

Alternate Instructions