Replaces the valve for your RV's holding tank. 2" Diameter passage allows wastewater to travel freely when valve is open. Valve body, seals, nuts, and bolts included.
Features:
To install, remove the broken waste valve and seals from your holding tank. Then place the included seals on the flange fittings and position the new valve body. Tighten the provided hardware to complete installation.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we'll to take a look at the Valterra 2" Bladex Waste Valve with the plastic handle. Now this Valterra Bladex 2" Waste Valve body comes with a nice stainless steel shaft. Has a plastic handle on the top. Now this handle is threaded, so it is made for easy replacement if it gets broken. The seals it comes with, chemically resistant seals. It is designed to fit the Bladex, the Valterra, the Bristol and the Anonda valves.
It includes everything shown here on the table. The waste valve, the two seals, the bolts and the nuts. So basically when you go to install this you just remove your own valve in your seal and then you place these new seals over the lip of your existing flange fittings, insert the new valve. You want to make sure you don't dislodge the seals. Once you get it in there, put your bolts and nuts in there and tighten it down.
You're all ready to do. Now when you pull your handle you can see it opens and then closes it. But that should do it on the review of the Valterra 2" Bladex Waste Valve with the plastic handle.
Average Customer Rating: 4.8 out of 5 stars (588 Customer Reviews)
Replaces the valve for your RV's holding tank. 2" Diameter passage allows wastewater to travel freely when valve is open. Valve body, seals, nuts, and bolts included.Excellent customer service. Katie D was Awesome to work with. Thank you so much, you’ve gained a new customer.
Product was perfect,so I ordered another one.
Installation was slightly challenging as the gasket kept moving around taking several attempts to fasten it without losing the alignment of the gasket to the piping. These types of valves seem prone to allow slight leakage through the part whenever the smallest interference is met. I have to hose the inside of the tube and part every time in order to make certain that the raw sewage didn't cause a leak in the valve. But, once the seal's made with the piping, it worked better but still leaks a little at the valve due to the nature of these types of valves.
A couple weeks ago I backed our travel trailer into a campsite and clipped a large rock with the waste tank drain system. The flange from the Y pipe was damaged so I needed to replace it and since the black tank valve may have been damaged, I decided to replace that as well. Etrailer had all the Valterra parts I needed and one important detail was that they were all identified with the Valterra part numbers eliminating any chance of miss-ordering a component.
Everything went together easily and the waste drain system on our TT is good as new. Thanks Etrailer!
Reasonably priced. They shipped and arrived promptly. Easy to install and have worked without issue for nearly a year. I would recommend etrailer and the Valterra valves.
Another quality part from etrailer fast service And the part fit perfectly install it within minutes of receiving it
I recommend a trailer highly the customer service representatives are fantastic and knew exactly what I needed to finish the job. Thank you, Trailer.
It was a hard to find item locally but not for Etrailer. The transaction was smooth and the delivery was fast. Exact replacement, great price!
Easy to install. Has a much better handle than the stupid plastic that came from the factory, that broke. Just be sure you drain the tank first
it was just what we was looking for fit perfectly on our portable waste tank thanks
Perfect replacement for the worn out original. Easy install and it still works smoothly and is tight after a year.
Easy to install, works fine.
Hard to find valve. E-Trailer had the inventory and quick service.
My motorhome dump pipes are pretty rigid, so I had a bit of a tough time removing the old valve and installing the new one. But once I had the new seals properly placed, I tightened the bolt/nuts and the valve works as it should with no leaks. The only downside is my fault. I was so concerned about getting new seals with the valve, I failed to note that there was a drilled stem with no handle.
Noticed the valves were leaking while winterizing. Won't replace them until we next travel. I've used Valterra in the past, and know of their quality.
Thanks for the email
I don't have much to say about the product. It is static in the open position 90% of the time.
I do appreciate how you at etrailer have kept me informed and asked questions, insuring that I am satisfied.
You may be able to tell from the attached photos, we are using these as gate valve for a fume exhaust system.
These are old photos. We have moved to a new facility, and the hoses are upgraded.
Exactly what I needed. Fit perfect. Quick delivery. Will definitely use this site again.
Great price and products. Could have been shipped quicker.
Converting airstream thetford valve to vaulters. The combination I chose dropped the drain 2” below the belly. I’ll have to install a grey tank to tuck everything up in my 73 Sovereign 31’ center bath rv.
Delivery was on time and installation was successful
Old valves were leaking and i was tired of always having a bucket to catch the leak when i opened the 3 inch cap.
2 down one to go as the black tank valve is holding strong.
There is nothing glamorous about buying 3" DWV fittings. But, etrailer made it easy with their great website and helpful videos. Was able to order all the fittings I needed to install a Sani-Con on my fifth wheel.
Used this to replace the old valve on my black tank. Works as advertised
It is the correct part and works well. Mo leaks.
Well I ordered quantity of 3, not sure what happened?
Original order # 115243947
Called in to change ship to address and guy changed to 1 I suppose??
Valves are great, disappointed that 3 day shipping for $20, took five business days, 6 days from order.
Very quick turn around. Thank you
Do you have a question about this RV Waste Valve?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.