Replacement recess-mount roller helps to ensure that your RV's slide out rolls in and out smoothly. Includes single gray nylon conveyor roller and zinc-plated mounting bracket.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everyone, I'm Ellen here at etrailer.com. Today we're taking a look at the replacement roller for RV slide outs. This is going to be a recessed mount roller, so as it sits there it's going to be kind of hidden and only a little bit is going to be rolling out at the top, so it's going to keep that nice and protected. Our bracket is made out of a zinc plated steel and then our roller is made out of a nylon construction. As far as the measurements go from side to side, it's about three inches wide and then about four and a half inches long, although if we go to the end of the bolt and the nut there holding everything together, it's about five and a quarter inches long.The little channel that our roller sits in is just about an inch and five eighths wide, and then it's about one and half inches tall. We go to the top of the roller, to the bottom of the housing there, maybe about one and nine sixteenths, if we get real exact with it.
Each of our mounting holes has a conical design, so that'll work with a counter sunk bolt for one of those flathead top bolts. The distance between those mounting holes, center to center from one side to the other is roughly three and a half inches in between each one. It's about one and three quarter inches. The distance between them side to side is roughly two and three eighths inches and that's pretty much all there is to it. For our look at the replacement roller for our RV slide out with a recess design.
If you need a different configuration of roller, we have a lot of options available here at etrailer.com, so definitely check those out and hope to get you rolling out on the road soon. Thanks for watching, we'll see you next time.
Average Customer Rating: 4.4 out of 5 stars (9 Customer Reviews)
Replacement recess-mount roller helps to ensure that your RV's slide out rolls in and out smoothly. Includes single gray nylon conveyor roller and zinc-plated mounting bracket.Etrailer was great, fast shipping. The part is well built for it's intended purpose.
Thank you for the Recess Roller. I have removed my RV carpet and installed luxury vinyl plank flooring. This roller will help carry the weight of the slide out and not scratch the new floor.
Excellent customer service and excellent shipping time. I will absolutely continue to use etrailer for all my camper needs. Thanks etrailer!
They worked great. Slide works like new again.
Great rollers very tough and will last longer than the originals
Do you have a question about this RV Slide Out Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.