Exterior Evacuation Drain Trap for 2" Sink Drain Opening

Question

Question:

I am looking at Exterior Evacuation Drain Trap. According the the video, the treads on the bottom are 1.75. I have a sink with a 2 opening. Do you have a drain that fits these requirements?

asked by: Lance D

0

Expert Reply:

The Exterior Evacuation Drain Trap # 37295195 actually should work just fine for your application as the top has a 2-3/4" diameter when you include the flange. This is the closest thing we have to what you're describing.

Attached is a review video for you to check out.

expert reply by: Jon G

0

Answer 1

The Camco RV Drain Trap, part #CAM37262 is designed for 3/4 inch diameter drain hoses. The threaded inlet portion of the trap measures 1-3/4 inches at the threads as shown in the attached photo. If your drain hose is 3/4 inches in diameter I am…

view full answer...

Answer 2

The Camco RV Drain Trap for 3/4-Inch Diameter Drain Hoses, part #CAM37262, has a threaded portion for connection to your RV sink that measures 1-3/4-inches in diameter at the threads. The overall diameter of the mounting flange is 2-5/8-inches. The…

view full answer...

Answer 3

There are some wires that are hot all of the time which is why we usually try to emphasize that the brake controller, like the Prodigy P3 #90195, needs to be connected to the cold side of the stop light switch when installing the Kit #ETBC7.…

view full answer...

Answer 4

The 520EM925AWWKIT trim kit included with the High Pointe Standard RV Microwave #HP39ZR is approximately 20.75” W x 15” H.

view full answer...

Answer 5

Hey Doug! The Camco RV Drain Trap #CAM37262 can be paired with the Sink Strainer w/ Push-In Basket for 2" Drain #37295325 so you get a strainer with a great seal to the drain!

view full answer...

Answer 6

We have seen people mount storage boxes on either side of the nose of a V-nose trailer like what you see in the picture I attached. The part #DZ91717P would work well if you have room for it like that. The dimensions of the box are 36" long…

view full answer...

Answer 7

The closest match that we have is the Valterra #T1035-2 RV Sewer Elbow. The internal measurement on the spigot end is 3" and is meant for a glued connection rather than a push together connection with an o-ring.

view full answer...

Answer 8

I recommend the LaSalle Bristol RV Shower Drain w/ Strainer - 3" Diameter - Chrome #34433R450LES. It has a 4-1/4 inch flange and will fit fit a hole up to three inches.

view full answer...

Answer 9

Hi Joshua, The Valterra Threaded RV Sink Drain #A01-2012VP is designed to fit 1-3/4" diameter drains. You can more easily measure the drain hole from the bottom of the sink, but you might need to untighten the nut for the drain in order get an…

view full answer...

Answer 10

The Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4045KA is actually the same unit as the PD4045KV. The KV is just an alternate part number for the same unit so this is the one that you want for a replacement.

view full answer...

Exterior Evacuation Drain Trap for 2" Sink Drain Opening

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching