B and W Biker Bar Tie Down System Recommendation for 2016 Harley Ultra Limited Low

Question

Question:

Does the biker bar work on a 2016 ultra limited low??

asked by: Kevin G

0

Expert Reply:

I spoke with a coworker of mine who is a Harley aficionado and he said your bike is build basically on a shorter version of the Touring frame so you need the part # BWMC2301.

expert reply by: Jameson C

0

Answer 1

You will need to pull down on the release handles of the B&W Biker Bar Motorcycle Tie-Down System #BWMC2304 which will allow the bike to be released from the mount and then you will be able to push the bike forward. See attached picture to see…

view full answer...

Answer 2

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 3

To install the Small Coin Pattern Vinyl Flooring #TS97FR with the RV Flooring Adhesive #TS76FR you just need to make sure that your trailer floor is a bare wood so you have the best bonding of the adhesive as possible. Be sure to sweep it out really…

view full answer...

Answer 4

The Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System #BWMC2302B is the replacement bar that fits H-D Dyna, Softail, and V-Rod bike frames. The #BWMC2301B is the Replacement Clamping Bar for B&W Biker Bar Motorcycle Tie-Down for…

view full answer...

Answer 5

I have a solution for you, but there is not an adapter that will allow you to mount the B&W Biker Bar #BWMC2301 to an e-track setup on a trailer. The Biker Bar does come with mounting plates/anchors that are mounted on the underside of your…

view full answer...

Answer 6

The Ventline Exterior Wall Vent for RV Range Hood, #V2018-01 does not have a screen. The vent is 11-1/2" by 5-1/2" with a 10 bolt pattern. Please note the linked product review video. the holes are set in from the edge by about 1/2" to…

view full answer...

Answer 7

I spoke with our resident Harley guy about what he thought of the B&W Biker Bar Motorcycle Tie-Down System for Trailers #BWMC2301 if he were to use it with his bike. Since the bike frame is designed to support not only its own weight but also the…

view full answer...

Answer 8

Thanks for the pictures. The tag does help narrow it down. It appears you have a pair of 2,500 lb axles on your trailer. This means we are likely dealing with an axle with a straight spindle that uses an Inner and outer bearing L44643 (1" inner…

view full answer...

B and W Biker Bar Tie Down System Recommendation for 2016 Harley Ultra Limited Low

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching