Can the B&W Biker Bar be Mounted on an Open Trailer

Question

Question:

Can you use it on a open trailer

asked by: Donald V

0

Expert Reply:

Yes, the B&W Biker Bar Tie-Down System Base with Anchor Plates, # BWMC2300, can be mounted and used on an open trailer.

The base plate's dimensions are 25 inches long x 6-3/4 inches wide.

This product is not the complete Biker Bar unit. The # BWMC2300 is only the mounting plate. The complete units are, # BWMC2301 for Harley-Davidson Touring models, # BWMC2302 for H-D Softail, Dyna, and V-Rod models, # BWMC2303 for the H-D Sportster, and # BWMC2304 for H-D with 1-1/2 inch custom frames.

I have attached a couple videos on the B&W Biker Bar for you to review.

expert reply by: Jared P

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Hi Tyler, When adding in air springs on a lifted vehicle the proper way to determine the correct sized spacer is to first install the upper and lower brackets and then measure the distance between them and subtract the height of the air spring…

view full answer...

Answer 3

The answer to your question will depend on how you use your truck. Vehicle-based systems like the RoadActive Suspension system or air bags will work just fine with a weight distribution system, but they work best to suspend weight being hauled in…

view full answer...

Answer 4

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the…

view full answer...

Answer 5

The Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR is an excellent choice to tow any trailer that has between 1 to 3 axles (6 brake assemblies). The main feature is the control knob that mounts in dash or other easily accessible area, it…

view full answer...

Answer 6

The only thing I can think of that could cause an issue like this is that you have indicator light wired incorrectly to something that has power when not connected to the motorhome. In the typical setup you would connect the power for the indicator…

view full answer...

Answer 7

The Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System #BWMC2302B is the replacement bar that fits H-D Dyna, Softail, and V-Rod bike frames. The #BWMC2301B is the Replacement Clamping Bar for B&W Biker Bar Motorcycle…

view full answer...

Answer 8

When measuring the pin box height you'll need to have the trailer level and the measure from the ground to the base of the king pin (pictured below). I recommend rechecking this measurement yourself since the dealership probably has zero…

view full answer...

Answer 9

The B&W Biker Bar Motorcycle Tie-Down System for Trailers #BWMC2301 and #BWMC2303 will use the same base so will attach to the trailer the exact same way, but it is the actual bar that attaches to the frame of the bike that will be different.…

view full answer...

Answer 10

For a 2012 Harley Davidson Ultra Classic the correct Biker Bar is the #BWMC2301 that you referenced.

view full answer...

Answer 11

If you're looking for wall storage, then the CargoSmart X-Track Trailer Shelf Bundle - Matte Black - Steel - 667 lbs - 5' Long #3481788-T would be the correct solution and it will give you the ability to hang some hooks; if you can…

view full answer...

Can the B&W Biker Bar be Mounted on an Open Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching