Replacement Jack Stand for Malone LowBed MicroSport Trailer

Question

Question:

I need a replacement jack stand for my Malone LowBed MicroSport, do you have this

asked by: Scott K

0

Expert Reply:

Yes, for your Malone LowBed MicroSport Trailer - 78" Crossbars # MPG464-LB, the correct replacement is the:

-Replacement Jack Stand with Crank Assist for Malone MegaSport Trailers # MPG538.

this kit also includes the necessary replacement hardware as well, if you need it.

expert reply by: Bryce D

0

Answer 1

You'll need to adjust the bunks on the Malone LowBed MicroSport Trailer #MAL25FR some to account for the shape of the pontoons but yes, this trailer will have no issues working with your Blue Sky Boatworks 360 Pro fishing kayak!

view full answer...

Answer 2

Excellent question, so I took a look and it turns out the "1" and "7" were backwards, so it should have been 217 lbs, which I verified with Malone. So here are the weights for both trailers: - 217 lbs: Malone MicroSport Trailer…

view full answer...

Answer 3

The Malone LowBed MicroSport Trailer #MAL25FR and Malone MicroSport Trailer #MPG461B2 are very similar as they are both built on the same platform. This allows them to both carry the same weight and size kayaks. The #MPG461B2 has a 30" height to…

view full answer...

Answer 4

For a Braxton Creek Bushwhacker Plus 15FK travel trailer I'm seeing an exterior length of 15'6". If this is the case for yours then I recommend the Classic Accessories Deluxe PolyPro III Heavy-Duty Cover for R Pod Trailer #CA80198. This…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 8

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 11

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 12

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Replacement Jack Stand for Malone LowBed MicroSport Trailer

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching