Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Add a tie-down point to a truck or trailer with a Snap-Loc E track anchor. Made of 3.5-mm steel, the low-profile tie-down anchor is unfinished and ready for custom paint colors. Bolt on wherever you need a strap-down point. Hardware sold separately.
Features:
Specs:
Great for contractors, movers, motorcyclists and anyone who tows. The Snap-Loc bolt-on anchor lets you install a permanent tie-down point wherever you need it, so you can securely strap down your equipment or supplies. Just bolt the anchor onto any smooth surface in your trailer, truck or garage, and it's ready whenever you need to tie down a load. Put the anchor on your trailer floor and you can strap pallets directly to it, or attach an anchor to your trailer wall to provide a strap-down point. Mount the Snap-Loc anchor to the ceiling so you can secure ladders or other long loads above the cargo that's on the floor.
Snap-Loc anchors have a square-hole design that allows for easy one-person installation using Snap-Loc carriage bolt hardware (sold separately). There's no need for another person to hold the bolt to keep it from spinning as you install the nut. The square-shaped underside of the carriage bolt fits snugly into the square hole of the Snap-Loc, which prevents the bolt from turning. This makes it much easier to install in a trailer wall or floor.
E Track accessories, such as cargo straps (sold separately), snap securely into the anchor slot using a spring-loaded mechanism. Just pull back on the E Track attachment's lever, put the end into the slot, and then release the lever.
Use the anchor with a Snap-Loc Loc-Ring (sold separately) to tie down equipment or large loads, secure your camping supplies, or trailer a motorcycle.
The Snap-Loc has a low profile, so it fits in places that other anchors don't - even on the side of your open tailgate. You can still close your tailgate as usual with the anchor installed. The streamlined fit also keeps the anchor out of your way when it's not in use. And if you need a recessed tie-down point, this single E Track anchor can be installed upside down - your E Track accessories will still lock into it securely.
The single-slot anchor also gives you a cleaner look for a more economical price than heavier 2' or 6' long E Track sections. Made of 3.5-mm steel, this low-profile tie-down anchor is unfinished and ready for your custom paint color. Bolt on wherever you need a strap-down point.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Snap-Loc E-Track style anchors. They're available in 4 different styles. This is our stainless steel version. That's part #SLSS. We have a zinc plated metal version. This is part #SLSZ.
We have an unfinished metal version. This is part #SLSU. And there is even a weld-on application available, part #SLSW. These anchor points are going to provide a great solution for our cargo management issues. As you can see any E-Track accessory is going to clip right into there giving us a good, secure anchor point for whatever it is that we need to store.
This is just a simple ring connection point. They've got straps. They've got bars that can run across. So, it's just a really good solution. These can be mounted just about anywhere as long as you get a good sturdy surface to screw it into or drill a hole, put a carriage bolt ...
these are square holes so you can but a carriage bolt right through there and bolt it right onto your trailer. As we said, there's a weld on application. It can be welded right onto the trailer or wherever else you want it during production and painted right over to match your finish. Again, the E-Track style, you just pull that lever toward you. Slide it up and then as you slide it down, that lever is going to click into position and it's going to hold that in place, no matter what.
I really like that for the straps because once the strap is in there, you don't have to worry about it coming unhooked. It's going to hold it's position until you can get over and make your other connection. You see we've got a connection made here on our 2 outside anchor points. We're just going to be securing a set of ramps here. Place them right into position. Then, it's just a matter of bringing one of our straps out. We can make our connection and snug it up. It's really all there is to it. This gives us a nice secure connection point that we'll not have to worry about. Again, available in 4 different styles. The "SLSS" is a stainless steel. The "SLSZ" is the zinc plated. The unfinished version, the "SLSU". And even the weld on application part #SLSW. .
Average Customer Rating: 4.9 out of 5 stars (241 Customer Reviews)
Add a tie-down point to a truck or trailer with a Snap-Loc E track anchor. Made of 3.5-mm steel, the low-profile tie-down anchor is unfinished and ready for custom paint colors. Bolt on wherever you need a strap-down point. Hardware sold separately.Fast shipping and great price. Although I haven’t hauled with it yet, it seems to be well made and better than traditional straps. I should have used all grade 8 hardware but that will have to wait for now. The hardware needed was 1/4” bolts. I used 2 1/2 “ length for my trailer that has standard 2x6 pressure treated lumber.
The Snap-Loc e-track single anchor is even better than I imagined. This is one heavy duty tie down for e-track that fits nicely in tight spaces like corners or where you don't really need a full length of e-track. I am not normally overly impressed with most products, and expect them to function as advertised. However, I believe you would break the mounting bolts or strap before these anchors would fail! The price was competitive and customer service was exceedingly nice (thanks Melinda E).
This is the second time I ordered E-track parts from etrailer.com . The product quality is great as is the price, I purchased the single e-track tie downs un-painted because I will be painting the trailer once the new mounting points are installed. I will purchase from this company again.
I have no complaints with this product. The design is so simple yet functional. I use this to anchor my cooler in the back of my side by side. Keeps from having really noisy tie downs. When not in use I can throw things on top of it and don’t have to worry about bending/braking them.
These work wonderfully. I mounted them to the side of my tailgate on my truck so I can strap things down with my tailgate down. The tailgate still shuts perfectly.
Put on the inside wall of the enclosed car trailer. Stuff inside now organized.
These single e-track tie downs are the real deal. High quality, well made and the right size for the rest of the common e-track accessories
This is going to be fantastic for me and the intended use. Shipping was fast, everyone was very helpful. I will be using etrailer more in the future. The only minor issue is that the product shown has square edged holes and the ones I received were round holes. Definitely not a deal breaker. A great product. Thanks!
Great system for tie down in our new construction trailer
They are great for organizing trailers.
Fast shipping and at a fair price. These work great bolted to the top rail on my utility trailer.
Product welded very nicely and we where 11.00 pieces short when we received the order. I contacted Etrailer and they shipped them out to us the same day.
Works great with the e-track horizontal 2 ft section mounted on my floor.
Best idea ever just put them where you need them.
quick shipping and good quality. Exactly what we needed to get the job done
Good for strapping in a certain place
GR8 product... easy to use and very good product...
Works great
will work very well
Items seemed to be as ordered and pretty much on time for scheduled delivery.
Exactly what they show! Great products. Thanks
Do you have a question about this E-Track?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Mike
11/27/2023
I like the single e-track, makes set up very versatile