How Far Apart Are Mounting Holes For Erickson Horizontal E-Track EM19147
Question:
Hi, I am going to purchase the e-chock and e-rail. I will be mounting the rails to my flatbed trailer with 2 thick wooden planks. What size of screws do you recommend I use to mount the e-rails? How far apart do you recommend I place the screws? Do you sell the screws and washers?
asked by: Robert M
Helpful Expert Reply:
The mounting holes are 2 inches apart, and to ensure its full capacity we do recommend screws in every mounting hole for the Erickson Horizontal E-Track # EM19147.
While we do not have the mounting hardware, the mounting holes are 1/4" diameter, so that's the size you'd want, with the correct length depending on how thick your wooden planks are; just be sure to get wood screws which I'm sure you knew but I just wanted to be thorough for you.
This will work great with the Erickson E-Chock Wheel Chock # EM09162 and if you also need a tie-down I recommend the Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet # EM58523.
Products Referenced in This Question
Erickson E-Chock Wheel Chock for E Track - Powder Coated Steel - Qty 1
- E-Track
- E-Track Wheel Chocks
- Erickson
more information >
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1
- E-Track
- E-Track Rails
- Horizontal
- 5 Inch Wide
- 2000 lbs
- 4 Feet Long
- Erickson
more information >
Product Page this Question was Asked From
Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs
- Car Tie Down Straps
- 1 Strap
- 11 - 20 Feet Long
- Ratchet Strap
- 851 - 1200 lbs
- Erickson
more information >
Continue Researching
- Shop: etrailer Horizontal E Track - Black Powder Coated Steel - 2,000 lbs - 94" Long
- Video: etrailer Horizontal E-Track Review
- Shop: Erickson E-Chock Wheel Chocks for E Track - Powder Coated Steel - Qty 2
- Shop: Erickson E Track Tie-Down Kit w/ 4 Ratchet Straps with Roller Idlers and 2 Wheel Chocks - 1,100 lbs
- Article: Basics of Tie-Down Anchors
- Shop: Erickson Adjustable Wheel Net with E-Track Fittings - 1,166 lbs
- Shop: Erickson E Track Strap with Ratchet - 2" Wide x 12' Long - 1,165 lbs
- Shop: Pack'Em Wheel Tie-Down Kit for Truck Beds and Trailers - 30" Tires - 800 lbs
- Shop: Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs
- Video: Optronics Trailer Lights - Clearance Lights - MCL48AB Review
- Video: CargoSmart E-Track or X-Track System ccessory Bar Review
- Q&A: Adding a Battery on an Enclosed Trailer to Power Interior Lights
- Q&A: What is a Good Galvanic Isolator to Use When Installing the etrailer E Track On my Aluminum Trailer
- Q&A: Slot Dimensions of the E-Track
- Article: Troubleshooting Brake Controller Installations
- Search Results: e~track ring
- Search Results: e~track accessories
- Search Results: backer plate
- Search Results: 3605
- Search Results: back plate
- Search Results: e~track hook
- Search Results: em09162~2
- Shop: Brake Controller
- Video: Review of K Source Blind Spot Mirror - Convex - KS53MD
- Q&A: How To Power Furrion Backup Camera On 2021 Chevy Silverado 3500 With 7-Way That Has Low Voltage
- Q&A: Should 12 Volt Hot Lead on 7-Way Trailer Connector Be Hot All the Time, WIll it Drain the Battery
- Q&A: Is Diode Needed to Prevent Trailer Battery from Backfeeding to Breakaway System
- Q&A: Connecting Deep Cycle Battery to Enclosed Trailer to Power Interior Lights
- Video: Trailer Brake Controller Installation - 2012 Chevrolet Silverado 90195
- Article: Determining Trailer Tongue Weight