Will a Draw-Tite Trailer Hitch Fit a 2012 Hyundai Elantra Touring
Question:
will this part fit the 2012 touring model
asked by: Jenn
Expert Reply:
If you have a 2012 Hyundai Elantra Touring Hatchback, the Draw-Tite Trailer Hitch, # 24844, will fit. I have included a link to the installation instructions for you. I have also included a link to all of the hitches that fit the Touring Hatchback model.
If you plan on doing some towing, this is a Class I trailer hitch with a 2,000 pound gross trailer weight capacity and 200 pound tongue weight capacity. You will want to consult the vehicle owners manual to determine the towing capacities of the car and stay within the limits of the lowest rated component.
For a ball mount, the correct part is # 3594 and you can use a 1-7/8 inch ball, # 19256, or a 2 inch ball # 19258. For a hitch pin and clip use # PC2. And for trailer lights, use # 118473. I have included a link to the installation details for the wiring as well.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Pin and Clip for 1-1/4" Hitches - 1/2" Diameter
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 1-1/4 Inch Hitch
- 1/2 Inch Diameter
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: air bags
- Q&A: How Many PWM Filters Is Needed if Furrion Camera Has Multiple Cameras Newer GM Truck
- Shop: 12V PWM Filter for RV Backup Camera Systems - Hardwire
- Shop: Towing Mirrors
- Shop: Suspension Enhancement
- Shop: Longview Custom Towing Mirrors - Slip On - Driver and Passenger Side
- Video: Voyager RV Backup Camera Systems 12V PWM Filter Installation - 2018 Forest River Grey Wolf Travel Tr
- Search Results: vgr64vr
- Q&A: No Signal And PWM Fix For Furrion Vision S Camera System Connected To 2022 GMC
- Video: Voyager RV Backup Camera Systems 12V PWM Filter Installation - 2021 Thor Coleman Motorhome
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Shop: Trailer Hitch
- Q&A: SumoSprings or Timbrens for a 2024 Chevy Silverado 1500 4x4
- Search Results: air lift
- Shop: Trailer Wiring
- Article: Best Air Bag Suspension (2023)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Shop: Timbren Suspension Enhancement System - Rear Axle
- Search Results: air suspension compressor kit
- Q&A: Recommended Brake Controller For A 2024 Chevy Silverado 1500
- Video: Review of Longview Custom Towing Mirrors - Slide-On Mirror - LO54FR
- Search Results: sumosprings
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Front Hitch for 2024 Chevrolet Silverado 1500 Diesel
- Shop: Fifth Wheel Hitch
- Shop: Air Lift Union Tee for 1/4" Air Lines
- Search Results: timbren
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
