T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

• Class V Trailer Hitch for a 2014 Ram 1500
  Yes, you can install a Class V trailer hitch on your 2014 Ram 1500. Curt hitch # C15572 is rated a Class V, but it has a 2 inch receiver. The tongue weight capacity is 1,500 pounds, and the gross trailer weight capacity is 15,000 pounds. You will need to stay within the capacities of the truck though since it is rated lower than the hitch. I have included links to the instructions and a video showing a typical installation for you. I also recommend etrailer ball mount kit # EBMK2416. it...
  view full answer...
• Adding 4-Way Flat to 2000 Chevy Silverado with Factory 7-Way
  Since your 2000 Chevy Silverado is equipped with the factory 7-Way connector all you will need to add a 4-Way is the Tekonsha T-One Wiring Harness # 118384. This will plug right in-line with the 7-Way (no splicing, cutting, etc) to provide you with a 4-Way flat that you can use for your new light bar. Because of how it installs it will also retain function of the existing 7-Way. I have attached an installation video that you can use for reference as well.
  view full answer...
• Trailer Hitch and Wiring Recommendation for 2002 GMC Sierra Without Factory Tow Package
  Hitches for your 2002 GMC Sierra are offered in several classes and sizes and the correct fit will depend on the exact version of the truck that you have. The link provided will take you to our main page for hitches for the 2002 Sierra; you can use the Select Vehicle Style drop-down menu to choose the version you have and see hitches that will work for you. For example, if you have a 1500 series you can use Curt hitch # 13322. An install video for this hitch is linked. Again for example,...
  view full answer...
• Does The Draw-Tite Max-Frame Trailer Hitch 75713 Come With Mounting Hardware?
  They actually are not, but fret not! The Draw-Tite Max-Frame Trailer Hitch # 75713 will utilize existing bolts on your 2018 Dodge Durango. If you watch the install video I have included below, it will show you exactly where these bolts are located. It's a total of 4 bolts (2 bolts on each side of the vehicle), so it will be a pretty quick and straight forward install as well. Install instructions are also included below. Just as a side note, if you will be towing with this hitch, you...
  view full answer...
• 4-Way to 7-Way Trailer Connector Adapter for a 2012 Toyota Tundra
  If trailer brakes are not required and you do not plan on getting a brake controller any time soon, you can just use # 37185. Plug the 4-Way into this adapter, ground the white wire and you will be able to plug in the 7-Way and you will have ONLY lighting functions. If the trailer requires a 12 volt circuit, trailer brakes, auxiliary power, or reverse lights they will not function. If you decide that you do want all of those features in the future. You would need the follow items to complete...
  view full answer...
• No Trailer Brake Lights or Turn Signals on a Trailer Towed by a 2004 Nissan Titan
  The first thing you will need to do is determine if the problem is on the truck or the trailer. Start by disconnecting the trailer and using a circuit tester like # PTW2993 if needed to test the trailer connector on the vehicle. Have someone sit in the vehicle cab and go through each function while you test the pins on the trailer connector with the circuit tester. You can use our wiring FAQ article as a guide to what the functions should be, see link. If all of the functions are working...
  view full answer...
• Fuse Location for 12-Volt Accessory Power Feed to Trailer on 2012 Dodge Ram 1500
  This typically occurs because of a blown or missing fuse in location J01 in the TIPM box located near the battery. The fuse is a green 40 amp cartridge type fuse. If the existing fuse is blown, be sure to check the power feed circuit on the trailer, making sure that there aren't any shorts in that wiring run. Also check the trailer connector on the tow vehicle and on the trailer itself. Check the pins and sockets for corrosion, sometimes corrosion can spread to the interior of the plug...
  view full answer...
• Will TowReady 4-Pole Trailer Adapter for Trucks w/ Factory 7 Way, Part # 118384, Work on 2010 F-150
  The TowReady 4-Pole Trailer Adapter for Trucks w/ Factory 7 Way, Part # 118384, is an adapter that is designed to provide a 4-pole trailer connector on vehicles that have a factory 7-way. This Y-shape harness plugs into the existing 7-way and provides both a 7-way connector and a 4-way. This enables you to add the 4-way connector without losing the 7-way, giving your F-150 the ability to tow trailers with either type of connector. If your 2010 F-150 has the factory tow package (but no...
  view full answer...
  
• How to Troubleshoot Factory Trailer 7-Way Plug for Power
  The first place I would check is your 2004 GMC Sierra's fuse panel. Look at all fuse locations labeled trailer or tow to double check if any fuses are missing or blown. If the fuses are intact, I would still check each fuse for signs of corrosion. Fuses that have been in place for 10 years could easily have developed a white or green film that could interfere with contact. There may be a wire under the hood that requires connection to activate the 12V circuit. The linked FAQ illustrates...
  view full answer...
• No Power on the Running Light Circuit on a 2000 Chevy Silverado z71 Towing a Boat Trailer
  There is a possibility of a relay or fuse related to tow package wiring either in the power distribution box or in the in-cab fuse panel that you can check. Look in the vehicle owners manual for all fuse and relay locations and check those. If the running light circuit shows no power on the 7-Way on the truck then that does eliminate the problem as being with the trailer. On the chance that it may be related to the trailer, it would most likely be a ground issue. You can check all the...
  view full answer...
• 4-Way Recommendation for 2012 Jeep Liberty with 7-Way
  Since you have a 7-way installed already on your 2012 Jeep Liberty I have a much easier solution for a 4-way but the part # 118554 would technically fit and work. Instead the part # 118384 would be much easier to install and use. This will plug in line with the 7-way at the rear of your Liberty and then will provide you with a 4-way.
  view full answer...
• Installation of Draw-Tite Trailer Hitch # 75578 On A 2009 Jeep Liberty
  On your 2009 Jeep Liberty, the Draw-Tite Trailer Hitch # 75578 is a compatible fit and will extend past the rear fascia of your vehicle as shown in the graphic I have provided. The measurement from the center of the hitch pin hold to the outer edge of the bumper is approximately 2-1/2 inches. Regarding the trimming of your bumper, there is no trimming necessary while installing this hitch on your vehicle. I have provided links to the installation instructions for this product as well as...
  view full answer...
  
• Adding a 7-Way Trailer Connector to a 2012 Dodge Ram 2500 Big Horn With Flatbed
  If your 2012 Dodge Ram 2500 came with a factory tow package that included a 7-Way at the back of the vehicle, you can use 5th wheel and gooseneck in-bed wiring harness, # 50-97-410. This harness plugs in line with the factory wiring harness under the truck and provides a 7-Way in the bed area. If the truck did not come with a factory tow package that included a trailer connector, you will have to hardwire one in starting with a 4-Way using # 119178KIT. A T-connector is not available. Once...
  view full answer...
• Drivers Side Brake and Turn Signal Lights Not Working on a 2012 Ram 3500 4x4 Cummins Diesel
  When a light is only working periodically that is usually an indication of a weak ground connection or a loose wire. But on a newer truck like your 2012 Ram 3500 this does not seem likely. The trailer connector having power is not surprising. That means that the trailer wiring is independent of the truck lights. I would start at the front and work my way back. You could have something going on with the fuse and/or relay (if equipped) on that side. Use the truck owners manual to find all...
  view full answer...
• Troubleshooting a 7-Way Install on a 2012 Jeep Grand Cherokee, Brakes Work but no Turn Signals
  It sounds like you may not have the tow package on your 2012 Jeep Grand Cherokee, you should head to your dealer and have them reflash your bcm so that you have all functions of your trailer connector. If you do have a tow package the first thing you will want to do is use a circuit tester like our part # PTW2993 and test the functions of the 7-way to determine if the problem is on the vehicle or the trailer side of the setup. Check out the video I attached that shows how this is done. If...
  view full answer...
• Can The Curt C62VR Wiring Harness Be Used On A 2018 Jeep Grand Cherokee With Factory Tow Package
  Though it is perfectly fine to use the Curt # C62VR even if your 2018 Jeep Grand Cherokee has the factory towing package, I don't necessarily recommend it. Reason being, if your vehicle was set up with that package, it will have wires run that are specific to it. These tie into the vehicle's computers for diagnostics and other technical what have yous, but they are there to make life easier. Something like the Tekonsha # 118384 (whos harnesses I prefer due to them lasting longer) will plug...
  view full answer...
• Troubleshooting Stoplight Circuit of 2011 Toyota Tacoma Trailer Wiring Not Functioning
  It does sound like the converter box has shorted out and you would need to replace it with the part # 118496 which is correct fit for your 2011 Toyota Tacoma. If the blinker circuits are still functioning on the trailer wiring but the brake light circuit is dead then that would indicate the circuit board isn't functioning properly and would need replaced.
  view full answer...
• No Power on Tail or Brake Light Pin of Part # 118384
  If you are using the # 118384, and are not getting any signal on the connector for the brake or the tail light, you most likely have blown or missing tow package fuses. These fuses are typically located in a fuse box under the hood, but their location can vary according to the year, make and model of your truck. Your owners manual should have a fuse diagram showing which fuses protect which circuits, as well as the location of the fuses.
  view full answer...
• Recommended Hitch and Towing Accessories for 2011 Jeep Grand Cherokee
  For your 2011 Jeep Grand Cherokee, I would recommend the Curt Class III Receiver, part # C13182. The hitch uses tubular steel for the crossbar, and in the opinion of many people, is more attractive than the square tube steel. The # 13251 would bolt into a reinforced tubular steel cross member welded to the frame of certain Jeep and Dodge Ram vehicles. The reinforced cross member was essentially a pre-installed hitch without the receiver. Beginning with the 2011 model year, Jeep discontinued...
  view full answer...
• Availability of Wiring Harness for 2013 Volkswagen Tiguan
  There is one confirmed fit for a 4-pole trailer wiring harness for your vehicle and it is the custom harness # CU26FR by Curt. This T-connector plugs directly into existing wiring. It has a powered converter that reduces strain on the wiring system and is made using SMT to ensure superior performance. I have included a FAQ article to help with the wiring.
  view full answer...
• Installing 4-Pole Trailer Connector on 2002 Chevy Silverado with No Trailer Connector
  If your Silverado has the factory plug located above the spare tire, the easiest way to install a 4-pole would be to use the Tow Ready # 118384. Simply remove the protective cap covering the plug, plug in one of the connectors on the Tow Ready Harness and run the 4-pole to the desired location. If there is nothing but the harness above the spare tire with no plug on it, the wiring from the 4-pole like part # 18002 would connect to the factory harness color for color, yellow to yellow,...
  view full answer...
  
• No Power on 12-Volt Accessory Pin on 7-Way of 2005 Chevy Silverado
  How to proceed will depend on what you meant by not getting any power to my trailer. If the 12-volt accessory power pin that's in the 1:00 position on your 7-way isn't active, you'll want to check the fuse in the power distribution box on the inside drivers side fender in the engine compartment. Remove the cover, and locate the two studs on the inboard side of the fuse block. The stud closest to the front of the truck should have a wire with a ring terminal fixed to it. If not, you'll...
  view full answer...
  
• Installing the 4-Pole Trailer Adapter # 118384 on a 2010 Chevy Avalanche
  The 4-Pole Trailer Adapter for GM trucks with Factory 7 Way, # 118384, is meant to plug in line with the factory wiring and provide a 4-Way flat connection. The 4-Way will provide left and right turn signal functions, brake light functions, and running light functions. The reverse light circuit will not be used or needed. I have included a link to the installation details below. If your 2010 Chevy Avalanche does not have a factory connector, you can add a 7-Way by using Twist-in, 7-Pole,...
  view full answer...
• Using 4-Pole Trailer Adapter Part # 118384 for Tailgate Light Bar on 2008 Silverado
  You are absolutely correct. The 4-Pole Trailer Adapter part # 118384 would plug inline to the connector for your existing 7-way trailer connector. If you need a mounting bracket for the 4-Pole, we offer part # 18144. To see the installation instructions for the Adapter, click on the link below.
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?