Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
Item # C59236
Our Price: $78.53
Confirmed to Fit
2012 Honda Accord
Coupe
Sedan
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (979)
- Q & A (0)
- Photos
- Used (1)
2012 Honda Accord - Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- 4 Flat
- Trailer Hitch Wiring
- Converter
- CURT
Install a 4-way flat on your Honda Accord with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Ensures that your vehicle's wiring matches that of your trailer
- Works with 2-wire, 3-wire and pulse-width modulation (PWM) systems
- Connects directly to your battery to avoid overloading your vehicle's electrical system
- Constructed using surface-mount technology (SMT) for consistent, reliable performance
- Maximizes trailer light yield and intensity while producing minimal heat
- Ensures superior operation in rough road conditions
- Resists water and vibration thanks to potted enclosure
- Connects directly to your vehicle's wiring with the included quick-splice connectors
- Color-coded wires and wiring guide ease installation
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 5 amps per circuit
- Tail lights: 7.5 amps per circuit
- Limited 1-year warranty
Installation
To determine where to splice into your vehicle's tail light wiring, you will need to consult the included instructions. Use the quick-splice connectors to attach the input wires of the tail light converter to the corresponding wires from your vehicle. Once you've spliced in the converter, connect the included hot lead to the black wire and run it up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery.
Then locate a flat surface inside your vehicle near the tail lights and adhere the black converter box using the provided double-sided tape. Find a raw metal surface to use as a ground point and secure the white ground wire using the provided ring terminal and screw. Finally, secure the converter wires to your vehicle using the included cable ties.
It is recommended that you use a small amount of grease on the 4-pole connector to help prevent corrosion.
Powered Tail Light Converter with Surface-Mount Technology
Because most trailers run on a 2-wire system - wherein the brake and turn signals are carried on 1 wire - the signals from your vehicle may have to be converted to be compatible with your trailer's wiring. If your vehicle operates on a 3-wire system, which means that it has separate brake and turn signals, then those signals will need to be combined so that they run on 1 wire to properly activate your trailer's tail lights. This converter will also ensure that your trailer's lights illuminate fully, even if your vehicle has pulse-width modulation (PWM) wiring. Note: This will not affect how the tail lights on your vehicle operate.
This converter is a circuit-protected, battery-powered unit that bypasses the electrical routes that are used by a basic wiring harness. As a result, there is virtually no draw on your tail light circuits.
Curt builds each tail light converter using surface-mount technology (SMT). This method of construction involves soldering electronic components directly to the surface of a printed circuit board. SMT eliminates the need for leads, which are used in older through-hole technology. The result is a circuit board that is smaller yet provides more routing area and that offers superior performance, reliability and durability.
Circuit boards constructed using SMT have been shown to perform better under rough conditions with excessive vibration than those made using the through-hole method. And where would vibration be more likely to occur than in towing applications? Curt converters also produce less heat, leading to increased durability and longer life. In addition, lower levels of resistance ensure better performance, especially for parts that operate at higher frequencies.
Each Curt circuit board is made using high-quality components that are pieced together in the most technologically savvy fashion, leading to greater predictability and reliability in functioning.
59236 Curt Powered Tail Light Converter for 2-Wire, 3-Wire or PWM Systems - 4-Way Flat Harness
Replaces 59200
Compare to Tekonsha TK47FR
Installation Details
California residents: click here
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Too difficult to install
Customer Reviews
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector - C59236
Average Customer Rating: 4.7 out of 5 stars (979 Customer Reviews)
Install a 4-way flat on your vehicle with this splice-in harness. Powered converter connects directly to battery to reduce strain on wiring. Potted, SMT construction boosts water and vibration resistance. Works with 2-wire, 3-wire, and PWM systems.by: Steve05/08/2023
So, video left out removal of plastic trays behind each wheel well. A small torx is required.
Per video my wiring on left side is correct Red to the Yellow/Black, Yellow to the Blue/Green. Test tool (as seen in video) shows nothing when brake pedal pushed; brake indicators on tester both light up when running lights are on, but the running lights indicator does not light up.
Blinker indicators on tester are correct.
Have done the training cycle 6 times, slowly.
Steve B.
5/23/2023
Hi. Turns out the video for the 2013 x3 is correct, for my 2017. Brake and tail lights on separate wires.
by: Vic Smith02/18/2024
2021 Ford Mustang Mach-E
For my application, a 2021 Mach-e, this required cutting and splicing into the LED tail lights. I went back to the interweb and ordered one that was plug and play and did not require splicing. Yes, there is a video where a guy identifies exactly how to install this particular kit on the Mach-e, but it was just a bridge too far for me. The plug and play wiring works great and was easier to install. The plug and play wiring took about 80% of the installation time, the hitch itself took about 20% of the install time.
Katrina D.
2/27/2024
I am sorry that this harness was a bit more complicated than what was expected to get installed. I would go with the plug and play all day. Unfortunately, the only harness we have for your 2021 Mach-E that is a plug and play option is part # TK24VR, which is currently on extended back order. This means, that we are waiting, but do not have a date that our shipment will be in, so we took the part off of the site for now.
by: Allen03/06/2024
2022 Kia Soul
I'm sure the wiring is fine. However, I bought from etrailer because the product support was supposed to be great. We can't figure out which wires to attach to. Yes, I've read instructions. Yes, I've used a multimeter and test light. Yes, I've posted in forums. Yes, I've spent hours looking online. No dice. I even had an electrician give it a go to determine what to splice. I'm injured so can't walk, making some direct instructions on which wires to splice more important at this time. I can't keep removing the lights, etc. and reinstalling them when I can't ID the correct wires. I told them this on the phone when I ordered. They seemed supportive. When I repeatedly asked for which wires to splice the response was something akin to, "We don't know. Figure it out."
Two thumbs down. Received great support from a different online supplier.
by: Luke06/07/2024
After one year of use, the hitch receiver continues to hold up great. No rust, flaking, or any other signs of damages.
Install took longer than I was expecting, but doesn't it always?
by: Mark 05/10/2024
Kia
Installed easily. Kia should have a plug in option so that you don't have to run wiring all the way to the battery. But installed fine, well detailed by etrailer.
by: Jerry K03/16/2024
This works great and people can see the brakes turn signals and tail lights when we have the bikes on the back of the car. We put this on so we could plug a portable lighting system in for our bike rack.
by: Michael 04/26/2024
Buick
I have a small convertible Buick. Almost no one would put a trailer behind this car. But I use it to pull my jet ski. It was great to have this connector. It works perfectly.
by: Chris03/22/2024
Terrible job packing hitch. See pics. Hitch has deep scratches through paint. Won't purchase from trailer again.
by: Robert 04/24/2024
Your installation video was great. I don't think I could have found the correct wires without it. The Curt instructions were not clear in determining which wiring scheme the Pacific has. I still don't know what PS stands for in their chart, but your video explained it nicely.
by: Gale 05/10/2024
I had this wiring harness professionally installed. Works as it should.
by: Scott 05/20/2024
Overall easy to install. Takes a few hours. The instructions could use updating. Vehicle years and trims (bulbs vs led) had wire colors that didn’t match any instructions or videos.
by: Lisa 06/18/2024
We had to ask a friend for the correct testing equipment, to locate the wires.
It took us about 3 hours to do it properly, without any experience.
I do wish there was a better video with better directions. But we figured it out.
by: Dave N10/29/2023
2024 Kia Telluride
The wiring harness doesn't quite work as advertised. I followed the provided instructions. Now when I turn on the left turn signal on my 2024 Kia Telluride, the left side trailer running lights also flash with the turn signal. The right side turn signal works correctly. Harness installation was a huge PITA. I blame Kia for not having a plug and play like my 2022 Santa Fe had. I had to remove both tail lights, splice into the factory wiring then run a power wire from the rear to the car's battery in the front. Again, a huge PITA but that's Kia's fault, not etrailer. Except for those things, I would've given more stars.
Jenny N.
11/2/2023
Yes, I would say powered hardwire harnesses are a tough install. I want to help do little trouble shooting with you. Can you check the area where you grounded the wire to make sure that it is to bare metal. If it is a clean, metal location already, disconnect the ground wire and attach it to a long piece of wire. Run this wire to the vehicle's negative battery terminal for testing purposes. If this solves the issue, the ground wire can be permanently run to the negative battery terminal or moved to a new location. I am hoping that this will stop the left turn signal from flashing on the trailer.
by: Daniel 05/14/2024
The product works great but the instructions were a little hard to follow for a newbie. I did eventually get it going but I needed to consult my mechanic (YouTube) to get it all figured out.
by: Mark N02/04/2024
What a great experience. The wiring harness kit was easy to install, and the people at etrailer were courteous and happy to answer my questions. They got right back to me and saved me lots of time. It’s very rare to get service like that anymore.
BTW, the unit works very well.
Thanks etrailer.
by: Cynthia02/29/2024
2018 Volvo XC60
My son said this is the part I needed so I guess it's good but my son, the mechanic said it's not what I needed. I guess it was too much so need to return.
Katrina D.
3/7/2024
Sure! I've got your information sent over to customer service to get the return processed. Yeah, that is the only confirmed universal option that we have for your 2018 Volvo XC60, I wish it was a bit less expensive and that there was an easy plug and play option for your vehicle. Some mechanics do carry some OEM parts for trailer wiring for vehicles; maybe see if your son is able to help you find an OEM harness. It may be a bit expensive, but you could always reach out to a Volvo Dealership to get an OEM harness.
by: John 03/10/2024
It’s a great product. We pull the small trailer from California to Missouri. No problems at all just like factory.
by: Mike 01/22/2024
Mercury
I received the Trailer hitch, and I was able to put on my 2011 Mercury
Marqui all by myself with the assistance of three jacks. I completed
the job in my garage at home. I did watch the videos on u-tube about
6X. I am very happy with the trailer hitch.
by: Paul 04/29/2024
Honda Element
Worked as advertised. Used on a Honda Element. I would recommend to others.
by: Alexander 02/14/2024
Kia
If you need something trailer/towing related, e trailer has always been great for me. This product worked great for my 2024 Kia telluride xline trim.
by: Robert04/27/2023
2023 Hyundai Palisade
2023 Hyundai Palisades are unique. Your website indicates that this item works for the 2023 Palisade, but according to a lady in your office, it only addresses the lights on the trailer, but does not disconnect the automatic braking system built into the Palisade in the event of a rear end collision that applies the brakes when it senses an obstacle (read boat trailer). Very frustrating!
Jenny N.
4/28/2023
I have a fix for you. All you need to do is turn off that feature in the vehicle while towing. I have a Hyundai and you will just need to play around in the vehicle menu system to find it and turn it off. I recommend reading up in your manual the section on towing. There may be other features you have that you will want to disable.
by: Bill04/28/2024
Fantastic and great video by on how to B install
by: Philip 03/19/2024
2019 Ford Ecosport
A little tricky to install, but the videos they provide do a great job of explaining what needs to happen. (2019 Ford EcoSport.) The wire clips are a little finicky... had issue with one side, but managed to get it working.
by: Stephen08/26/2023
Once I understood I had a 2 wire system in my 2022 BMW X3 the installation went well. The green wire for the right tail light is too short and I had to splice on an additional 2' of wire.
by: Thomas 05/01/2024
Works great when installed correctly according to the instructions.
25
979
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- How to Determine Correct Curt 4-Way Wiring Harness For 2024 Kia TellurideYeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride doesn't matter, and you can just go ahead and use the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector # C59236. But this is the most challenging install, and something I personally don't recommend; it's just making things harder...
view full answer... - Does the Hitch for a 2024 Toyota Grand Highlander Extend Through the Bumper or Below It?Below the bumper. The Curt Trailer Hitch item # C26VV mounts to the bottom of your 2024 Toyota Grand Highlander's frame and extends out below the bumper and trim. This installation method requires no cutting of your trim or fascia. The Curt item # C26VV is the only hitch currently available for the new 2024 Grand Highlander (09-13-2023). It is a class III hitch with a 2" receiver. This hitch is custom fit and bolts to your Toyota with included hardware. I have attached the installation...
view full answer... - Wiring Harness for 2024 Kia Telluride X-Line With LED Tail LightsSince your 2024 Telluride X-Line is not an LS or S model the correct wiring harness is the Curt # C29ZV. This will plug into the connection points in the rear cargo area and provide you with a 4-way to power your trailer's signal lights. The # C59236 you looked at fits all models but requires splicing so I do not recommend using this since you have a plug and play option available.
view full answer... - Recommended Hitch for a 2022 Volvo XC60 RechargeYou will want to go with the Curt Hitch item # C92WR. There is no stealth hitch for the 2022 Volvo XC60 Recharge. The Curt hitch is confirmed to fit your Volvo. I like this hitch because it has the highest capacity amongst available hitches and it installs with a hidden cross tube. This leaves only the 2" x 2" receiver visible when you are not towing. It has an identical installation method and as of 12/03 you'll save some money over the Curt item # C92WR. The Curt Hitch item # C92WR...
view full answer...
- Recommended Hitch for a 2023 Acura MDXNo, it doesn't but there is an etrailer one that does. It is the etrailer Hitch item # e27KR. This hitch is custom fit and bolts to your 2023 Acura MDX with included hardware. It is also a class III hitch with a 2" receiver. I have linked an installation video below. Please note that this hitch, and the rest available for your 2023 MDX, will not allow the use of the fullsized spare tire. It only works with the smaller mini spare. I checked with our vendor. The etrailer Hitch item #...
view full answer... - What Does the Curt Hitch Look Like When Installed on a 2024 Toyota Grand Highlander?I have attached a picture below of the Curt Hitch item # C26VV installed on a 2024 Toyota Grand Highlander. I really like this hitch because the crosstube installs behind the rear bumper leaving only the 2" receiver exposed. The Curt Hitch item # C26VV is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. If you are planning on towing you will also need a wiring...
view full answer...
- Recommended Hitch and Wiring Harness for a 2024 Toyota Grand HighlanderYes, we have the wiring harness and you can order it in addition to the item # C26VV hitch for your 2024 Toyota Grand Highlander. Whether you have the plug and play connectors will depend on if your Highlander has the towing package. If you have the tow package you will need the Curt item # C55245. If your Grand Highlander does not have the tow package then there is no plug and play option and you'll need to use the Curt Powered Tail Light Converter item # C59236. The easiest way to...
view full answer...
- Recommended Tow Wiring for a 2023 Kia Telluride With LED LightsNo, the Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter # TK74CR will unfortunately not work with your 2023 Kia Telluride with LED lights. Your best bet would be to use a universal wiring harness # C59236 which will work with LED lights.
view full answer... - 4-Way Vehicle Wiring Harness Needed For a 2022 Hyundai Santa Cruz SELThe are only 2 ways to confirm if the Curt T-Connector Vehicle Wiring Harness # CU94FR will fit your 2022 Hyundai Santa Cruz. First is by removing the underbody panel by the spare tire to see if there is a connector present. The second would be to contact your dealer with your VIN number so they can check the wiring schematic for your specific Hyundai to ensure the connector is present. If your Hyundai does not have the connector present you'll need the Curt Powered Tail Light Converter...
view full answer... - Recommended Hitch for a 2023 Lexus RX 350 The Draw-Tite item # DT73QR installs below the bumper. This hitch is perpetually backordered due to Draw-Tite being bought out so I have a way better option for a hitch for your 2023 Lexus RX 350. I recommend the Curt Trailer Hitch item # C29VV. This hitch is custom fit and bolts to your Lexus with included hardware. I really like this hitch because the crosstube mounts behind your rear bumper leaving only the 2" receiver visible. This not only looks better it also helps with ground clearance....
view full answer...
- Parts Needed to Install 7-Way/4-Way on 2024 Kia Telluride with LED TaillightsI do have a solution for your 2024 Kia Telluride that has the LED taillights that does allow it to have both a 4-way and 7-way plus install a brake controller but it is not with the # TK74CR which does not work for you based on the LED taillights. Instead you would need to go with a 4-way first like with the Curt # C59236 which is a universal install type that requires splicing into the taillights and the brake controller install kit part # ETBC7 which comes with everything needed to convert...
view full answer... - 4-Way Wiring Harness for 2023 Kia Telluride With LED Taillights The Curt # C93FV is intended for vehicles without LED taillights. If you have LED lights on your 2023 Kia Telluride you will need the Curt # C59236 instead. I understand you would rather have a plug an play installation, but this is the only wiring harness compatible with LED taillights on your Telluride. I have attached an installation video below for your reference.
view full answer... - Best Trailer Hitch for a 2023 Toyota HighlanderThe best trailer hitch for your 2023 Toyota Highlander is the Curt Hitch item # C99FR. This hitch is custom fit and bolts to your Toyota with included hardware. It is a class III hitch with a 2" receiver. It has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. The reason this is the best hitch is that the entire crosstube mounts behind the rear bumper. This leaves only the 2" receiver visible, which not only looks better but helps with ground clearance. It fits both the...
view full answer...
- Recommended Hitch for a 2024 Mazda CX-90Yes, we do! To add a hitch to your 2024 Mazda CX-90, I recommend the Curt Trailer Hitch item # C25FV. This hitch is custom fit and bolts to your Mazda with included hardware. The Curt Hitch item # C25FV is a class III hitch with a 2" receiver. It is made in the USA and has a 5,000 lbs towing capacity and a 500 lbs maximum tongue weight. If you are planning on towing you will also need a wiring harness item # C59236 and a ball mount kit item # C45534. I also recommend using the No-Drill...
view full answer... - What is the Best Hitch for a 2024 Kia Sportage the Curt or the etrailer?The best hitch for your 2024 Kia Sportage is going to be the etrailer Hitch item # e38KR. This hitch is custom fit and bolts to your Kia with included hardware. Both the Curt item # C94WR and the etrailer item # e38KR are confirmed to fit the 2024 Kia Sportage. These hitches are identical with the exception that the etrailer hitch has a matte black powder coat finish that offers superior rust protection. They both have the same installation method and towing capacity but this one will...
view full answer...
- Will the Draw-Tite DT34GR Hitch Fit a 2024 Kia Carnival?Yes, it will! The Draw-Tite Hitch item # DT34GR has been confirmed to fit the 2024 Kia Carnival. This hitch is custom fit and bolts to your van with included hardware. It is a class III hitch with a 2" receiver it has a 4,000 lbs towing capacity and a 600 lbs maximum tongue weight. I have attached a couple of pictures below along with an installation video so you can see what this hitch looks like once it is installed. If you are planning on towing you will also need a wiring harness...
view full answer...
- Will Trailer Hitch Receiver for 2023 Honda CR-V Also Fit HybridYes, the trailer hitch receivers for the 2023 Honda CR-V fit the hybrid model as well. There are no differences for the hybrid hitch since all of the available options fit all models. If I were to recommend one it would be the etrailer Trailer Hitch Receiver # e98848. I like the etrailer hitch because of the matte black powder coat finish. This gives it an OEM look and does a better job hiding inevitable dirt and dings. If the finish isn't a big deal to you, I would choose whichever has...
view full answer... - Recommended Hitch and Wiring Harness for a 2023 Honda CR-V Hybrid Touring Yes, you are correct. The Curt Trailer Hitch item # C13397 is the correct hitch for the 2023 Honda CR-V Hybrid. The wiring harness is going to depend on whether or not your CR-V is front wheel drive or all wheel drive. I have listed both options below. One is custom fit and the other requires splicing. Front Wheel Drive - Curt Powered Tail Light Converter item # C59236 All Wheel Drive - Curt T-Connector Vehicle Wiring Harness item # C56370 You may lose some of the range on the Hands...
view full answer... - Which Curt Trailer Hitch For 2021 Chrysler Pacifica Limited Non-HybridHey there Tom, good question as you correctly noted a couple Curt hitches for your 2021 Chrysler Pacifica Limited non-hybrid. The appropriate one for you really depends on how you want it to look on your Pacifica. One has a visible crosstube and one has a hidden crosstube. If you take a look below you can see the differences, and here are the part numbers for both: - Hidden Crosstube: Curt Trailer Hitch Receiver # C65CR - Visible Crosstube: Curt Trailer Hitch Receiver # C13383 They otherwise...
view full answer...
- Trailer Hitch and Wiring Kit Recommendation for a 2024 Mazda CX-90The hitch and wiring combo you'll need to go with for your 2024 Mazda CX-90 comes from Curt and includes the following parts: - Trailer Hitch # C25FV - Wiring Harness # C59236 The trailer hitch doesn't require drilling, but you may need to enlarge some of the access holes in your frame to get the hardware installed, and then the wiring splices into your OEM wiring. If the plan is to eventually tow with this vehicle then you'll also need a ball mount setup. Attached is a helpful article...
view full answer... - Parts Needed To Tow a Trailer With Electric Trailer Brakes Behind a 2015 Freightliner M2You will need the Curt Class V Universal Weld-on Receiver Hitch # 15902 for your 2015 Freightliner M2. This will allow you to weld on a receiver with up to 10.865" of drop. For the trailer lighting you will need a combination of the Curt Powered Tail Light Converter # C59236 and the Universal Installation Kit # ETBC7 to get to a 7-way blade trailer connector. Do note the wiring to reach the battery is 25' long so if your chassis is longer you will need additional Wire # 10-2-1 to reach...
view full answer... - Will Curt Trailer Hitch Receiver Fit 2023 Honda CR-V Touring HybridYes, we have confirmed that the Curt Trailer Hitch Receiver # C12169 will fit your 2023 Honda CR-V Touring Hybrid. This is a Class II hitch with a 1-1/4" receiver. If you would rather have the additional tongue weight capacity, and be able to use 2" accessories, the Class III # C13397 will also fit. If you have the AWD model we have the Curt T-Connector Vehicle Wiring Harness # C56370. If you do not have the AWD model you need the # C59236 instead. Both of these will provide you with...
view full answer... - Does The Hidden Hitch by Draw-Tite Affect The Hands Free Liftgate Feature On a 2021 BMW X5? The Hidden Hitch by Draw-Tite Trailer Hitch Receiver # DT96GR will not prevent you from using the kick feature for your hands free liftgate on your 2021 BMW X5. The receiver sits in front of the kick sensor so it will not interfere with the sensor. Do note the center section of the receiver hangs lower than the lower fascia so you will want to be mindful of this when performing the kick to open the liftgate. I do recommend installing the 4-Way # C59236 when you install the receiver. This...
view full answer... - 7-Pin Wiring Harness And Brake Controller For A 2024 Hyundai Santa CruzHello Evan, I can help clear this up. The Curt T-Connector # C68JR that you mentioned is for vehicles already equipped with the factory tow package. Meaning there will be an OEM brake controller plug already present under the dash and the brake controller would simply plug right in. So, if you do have the factory tow package, you can easily install the # C68JR wiring harness. Then for example, you can use a brake controller like the Curt TriFlex # C24VV, along with the Custom Wiring Adapter...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Lindsey S
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Video Edited:
John S
Video by:
Kathleen M
Video by:
Zach D
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Ethan H
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Jenny M
Updated by:
Kristina F
Updated by:
Isabelle B
Written by:
Kristen H
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina B.
5/16/2023
You will need to double check and make sure that your ground wire is attached to a clean metal surface. If you are grounded properly, and still have no lights, then you will want to test the converter box itself. If you are receiving power to the box and nothing out of the box, then it is possible that you have a defective box.