Replacement OEM Wiring Harness for Ford F-150

See what our Experts say about this CURT Custom Fit Vehicle Wiring

• Mounting Panel To Install Redarc Tow Pro Elite on 2018 Ford F-150
  To install the Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR in the 2018 Ford F-150 I recommend the Mounting Panel for Redarc Tow-Pro Elite Trailer Brake Controller Control Knob part # 331-TPSI-001. This is a universal mounting panel, Redarc does not make vehicle specific mounting panels. If your Ford has a factory towing package, I recommend to use adapter part # 331-TPH-007 to install the Redarc Tow-Pro Elite. If your truck does not have a factory tow package you can use...
  view full answer...
  
• Wiring Harness For 2020 Ford F-150 Without Tow Package
  Where to start with your wiring harness depends on what available connectors you have under the bumper of your 2020 Ford F-150 and also what trailer connector you're looking to add on your truck. If your truck already has the square shaped connector, #C56110 will add a 4-way connector for your trailer. If you have a square shaped connector on your truck and want to add a 7-way connector for your trailer,the # ETBC7 is what you need. If you instead have a round shaped connector on your...
  view full answer...
  
• Trailer Wiring Harness Recommendation for a 2013 Ford Edge
  It would appear as if the Replacement OEM Wiring Harness part # C56110 that you referenced would work on your 2013 Ford Edge since you have what looks like the correct port for it. By the way, thanks for the picture. What you can do to verify that the plug is active is use a circuit tester like our part # PTW2993 and test the different pins you see for voltage when the brakes/blinkers/running lights are on. If the pins carry voltage with the use of your taillight functions then the # C56110...
  view full answer...
  
• How To Install a 7-Way and Brake Controller on a 2012 Ford F-150 with No Trailer Connector
  In order to install a 7-way trailer connector and brake controller on a 2012 Ford F-150 you will first want to start with a 4-way trailer connector, the Replacement OEM Wiring Harness for Ford F-150 part # C56110 which is plug and play. Once we have the 4-way trailer connector installed we can then convert this to a 7-way with the 7-Way RV and 4-Way Flat Adapter part # ETBC7. The 12 volt power and brake output wires should be tapped off near the spare tire somewhere but if not this kit...
  view full answer...
• How to Install a 7-Way Trailer Connector On a 2012 Ford F-150
  I do have a way for you to install a 7-way trailer connector on your 2012 Ford F-150 but the plug in the photo you attached does not have all of the circuits needed for a 7-way trailer connector so there is not one that plugs directly into this. Instead, you would first need to install a 4-way trailer connector like the Replacement OEM Wiring Harness part # C56110 which does use that plug and then adapt this 4-way into a 7-way using the 7-Way RV and 4-Way Flat Adapter part # ETBC7. If...
  view full answer...
  
• 4-Pole to 7-Way Wiring Conversion Kit for 2011 Ford F-150
  If your 2011 F-150 has a pre-installed 4-pole harness (which probably has a rectangular connector on the truck side like the one on parts # C56110 and # HM11140735; see the linked photo, please) then you can convert that wiring to a 7-way using kit # ETBC7. This kit has all the parts needed to upgrade the 4-pole setup to a fully functioning 7-way. You will retain your current 4-pole and plug it in to the included 7-way adapter in the kit, then make a few more wiring connections for the...
  view full answer...
  
• How to Add Second 4-Pole Trailer Connector to 2015 Ford F-150
  If you want to add a separate 4-pole connector to your F-150 to power the lights in your tool box you can use part # 118384. This will simply plug in behind your existing trailer connector, going inline with it. Your existing 4-pole/7-way will remain active but you'll then have a second separate 4-pole for connection to the tool box lighting. If your tool box uses different wiring/connectors than a standard 4-pole, please let me know. You'll want to ensure the total load from all lights...
  view full answer...
• Wiring Harness and Ball Mount Recommendation for a 2018 Ford F-150
  The Curt Trailer Hitch # C86HR is an excellent choice for your 2018 Ford F-150. Then for wiring you can either install the Curt # C56110 if you have the rectangular OEM plug or the Curt # C55774 if you have the round OEM plug. Both of these options give you a 4-Way flat connector that will match up with your small utility trailer. Since pickups can be used for a variety of towing applications I highly recommend installing the B&W Tow & Stow 3-Ball Mount # BWTS10049B. This comes with the...
  view full answer...
• Recommended Best Trailer Hitch Receiver Option For 2015 Ford F-150 XLT
  For your 2015 Ford F-150 XLT, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # C14016. This will give you a 2 inch receiver for the most variety of accessories and choices for ball mounts. It has an extremely strong rating of 1000 lbs tongue weight and 10,000 lbs towing, which will exceed your vehicle capacity. You will be limited by the capacities listed in your owners manual and not by the parts attached. For your vehicle wiring, your truck either came...
  view full answer...
• Will TowReady 4-Pole Trailer Adapter for Trucks w/ Factory 7 Way, Part # 118384, Work on 2010 F-150
  The TowReady 4-Pole Trailer Adapter for Trucks w/ Factory 7 Way, Part # 118384, is an adapter that is designed to provide a 4-pole trailer connector on vehicles that have a factory 7-way. This Y-shape harness plugs into the existing 7-way and provides both a 7-way connector and a 4-way. This enables you to add the 4-way connector without losing the 7-way, giving your F-150 the ability to tow trailers with either type of connector. If your 2010 F-150 has the factory tow package (but no...
  view full answer...
  
• Wiring Needed to Install a 7-Pin in a 2014 Ford F-150
  To use a 7-pin with your 2014 Ford F-150, the first thing you will need to add is a 4-pin flat plug, # C56110. From there you would need to add Universal Installation Kit # ETBC7 and you're set.
  view full answer...
  
• Recommended Replacement Trailer Wiring for 2018 Ford F-150 Without Tow Package
  If you have the factory 4-way, then you simply need the Replacement OEM Wiring Harness for Ford F-150 # C56110. If you have the factory 7-way then I recommend the Reese Multi-Plug Wiring Harness for Factory Tow Package - 7-Way and 4-Way Flat Trailer Connectors # 74682. Your truck will have either the rectangular connector or the round connector already present. These will simply plug into the factory wiring which is present even without tow package and you will be good to go.
  view full answer...
• Reverse Light Recommendation that Easily Plugs into Trailer Wiring
  We have the Light Buster Backup and Utility Light for 7-Way RV Style Connectors # C8020 which plugs into the 7-way trailer wiring connector you have at the rear of your vehicle and will give you a brighter lighting when backing up at night.
  view full answer...
• 4-Pole Wiring for 2018 Ford F-150
  We have 4-pole wiring harnesses for the 2018 Ford F-150 such as Curt # C56110 which is a direct OEM replacement. This item and the similar Hopkins part # HM11140735 plugs in at the rear of the truck with a rectangular plug. Please refer to the linked photo. If instead your truck has a round U.S Car type connector you can use Curt # C55774 which includes both 4-pole and 7-way type connectors on one product.
  view full answer...
  
• Parts Needed to Install 7-Way Trailer Wiring in 2016 Ford F-150 without Tow Package
  You will need to start with a 4-way (if you do not have one). For that you would want the # C56110. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller. For a brake controller I would recommend the Prodigy P2 Brake Controller...
  view full answer...
• Troubleshooting Trailer Light Functions Not Working on 2014 Ford F-150
  On your 2014 Ford F-150 if you don't have factory wiring, you will simply splice into the tail light wiring at your tail lights to get the 4-way functions using # C58044. If you have the factory 4-way, then the harness may be bad or need help connecting. The Curt # C56110 is intended as a factory replacement for your truck. Make sure all the pins are not bent and the connection is free of debris or corrosion. If you have the factory 7-way, you will want to check your factory wiring...
  view full answer...
  
• Boat Trailer Lights Sometimes Work and Sometimes Do Not When Connected to 2010 Ford F-150
  It sounds like the connector on your truck may be corroded or there is a loose connection from the vehicle side connector to the boat trailer. I would begin by checking the vehicle and trailer side connector for corrosion, if there is corrosion you will need to replace the connector. Next, you will want to check to make sure all the lights on the trailer have a good ground to a clean metal surface. If you are using a plastic license plate holder, this make be preventing the left light...
  view full answer...
• Hitch and Wiring Recommendations for 2015 Ford F-150
  For your 2015 Ford F-150 that does NOT have a factory-installed hitch receiver I recommend the Curt # C86HR Class III hitch. This offers the same 900-lb tongue weight rating as the other options but it costs less. Installation hardware is included and the linked video will show you the entire install process. The only special tool needed is a torque wrench like # ALL944001 that will let you tighten the fasteners to the correct values as specified in the instructions. The written instructions...
  view full answer...
• Troubleshooting Factory 4 Pole Trailer Connector on 2013 Ford Edge
  It's possible that you've got some blown fuses or relays in the distribution box under the hood. Check fuse locations 37, 53, and 63. If you have blown fuses, it's likely they were blown by short circuits in the wiring of the trailer towed by the previous owner. If the fuses aren't the issue, rather than tracing the trailer wiring from the rear of the vehicle up front, you'll be better served by just abandoning the factory setup and installing an aftermarket trailer wiring harness like...
  view full answer...
• Recommended Wiring for 2016 Ford F-150 to Have 7-Way Trailer Connector
  If you already have the round wiring connector on your 2016 Ford F-150, then you simply need the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors # C55774. If you do not have the round connector and instead have the rectangular connector, then you will need the Replacement OEM Wiring Harness for Ford F-150 # C56110 to give you a 4-way and then add the 7-way wiring kit for brake controller # ETBC7 and connect the brake wire to the blue wire...
  view full answer...
• Trailer Hitch, Wiring and Brake Controller Recommendation for 2014 Ford F-150
  First let's start with a hitch for your 2014 Ford F-150. For that the most popular option is the Curt # C14002 which I attached an install video for as well. You will need to start with a 4-way (if you do not have one). For that you would want the # 18252. From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and...
  view full answer...
• Recommended 7-Way Plug For A 2013 Ford F-150
  The Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable part # A10-7W6 is the trailer side plug. I believe you are looking for a female 7-way plug for your 2013 Ford F-150. The Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable part # A10-7W6 will plug into a 7-way plug on the truck. If you have a factory tow package on the 2013 Ford F-150, you can use the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part # C55774 which will plug into a port under...
  view full answer...
• Parts Needed to Tow 30-Foot/6500-lb Trailer with 2010 Ford F-150
  First you'll want to check your Ford owner's manual to confirm your particular truck, with its specific mix of cab style, engine, transmission and suspension components, has the required towing capacity for your 6500-lb trailer. If you cannot verify this in the manual your local dealership can look up the truck's VIN to confirm its tow rating. I checked the online manual for the 2010 F-150 and on pages 256-258 the towing capacities of the different configurations are listed. Trailer weight...
  view full answer...
• Recommended 7way Trailer Plug for a 2014 Ford F-150 That is Prewired for a 4way
  I can help you convert your 4way to a 7way on your 2014 Ford F-150. Since your vehicle is equipped with a factory 4way plug you will first need the Curt harness # C56110. To get a 7way for your trailer needs I recommend an adapter like the # ETBC7. This will allow the 4 way to plug into the adapter then you will need to run a few more wires to to gain the other functions of the 7way. It may be possible to use your current 7way if you snip off the round connector and use butt connectors...
  view full answer...
  

Do you have a question about this Custom Fit Vehicle Wiring?