Recommended 7-Way Plug For A 2013 Ford F-150
Question:
I need the female plug for a 2013 F150rd will mightyn cord A10-7W6 work?
asked by: Bill E
Expert Reply:
The Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable part # A10-7W6 is the trailer side plug. I believe you are looking for a female 7-way plug for your 2013 Ford F-150. The Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable part # A10-7W6 will plug into a 7-way plug on the truck.
If you have a factory tow package on the 2013 Ford F-150, you can use the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package part # C55774 which will plug into a port under the bumper.
If you do not have a tow package, you may need to hard wire in a 7-Way plug with part # ETBC7 which comes with all the components needed to install a plug on the truck. Please keep in mind you will also need a 4-pole connector for this as well. If you have a factory tow package, you will need part # C56110 if you do not you will need to hard wire in a 4-pole connector like part # C58044. I have attached a helpful article for your reference.
If you are talking about a plug in the bed of the truck for a goose neck or fifth wheel trailer setup, you need 5th Wheel/Gooseneck 90-Degree Wiring Harness w/ 7-Pole Plug part # 50-97-410 which plugs in line with the existing 7-way plug and gives you another plug in the bed of the truck to make hooking up the fifth wheel or goose neck trailer easier.
Products Referenced in This Question
5th Wheel/Gooseneck 90-Degree Wiring Harness w/ 7-Pole Plug - GM, Ford, Ram, Toyota - 9' Long
- Custom Fit Vehicle Wiring
- Fifth Wheel and Gooseneck Wiring
- 9 Feet Long
- Custom Fit
- 7 Round - Blade
- Bargman
more information >
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- 7 Round - Blade
- CURT
more information >
Replacement OEM Wiring Harness for Ford F-150
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Curt 4-Way Flat Trailer Connector w/ 60" Harness and Wire Taps
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- 5 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable - Trailer End - 6' Long
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- 6 Feet Long
- Custom Fit
- 7 Round - Blade
- Mighty Cord
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Determine the Right Air Pressure to Fill a Trailer Tire
- Q&A: What Size Battery Is Needed for the Lippert 6-Point Ground Control
- Q&A: Could GO Power Solar Panel kit part # 34273836 Mount to Pin Box and Use SAE Port
- Q&A: TrailAir Pin Box LC158778 Installation Instructions
- Q&A: Bolts and Bracket for the Tie Down Caliper to Kodiak Caliper
- Q&A: How to Charge a Trailer Battery Through a 7-Way Connector
- Q&A: Can I Charge My Trailer Battery Using 7-Way Trailer Connector on Truck
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: What is the Best Trailer or RV Storage Cover
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)