Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
Item # C55774
Retail:$53.16
Our Price: $28.16
You Save: 47%
Confirmed to Fit
2014 Dodge Durango
with factory Tow Package
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (610)
- Q & A (0)
- Photos
2014 Dodge Durango - Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
- 4 Flat
- 7 Round - Blade
- Trailer Hitch Wiring
- CURT
- No Converter
Quickly and easily install a 7-way and a 4-way trailer connector on your Dodge Durango with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.
Features:
- Provides both a 7-way RV-style and a 4-pole flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Designed for use with a factory tow package
- Compatible with 5-pole and 6-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection point behind rear bumper
- Plug in connector
- Includes mounting bracket and hardware
- Comes with protective covers for connectors
- Assembled in the USA
- Limited 1-year warranty
Installation
This custom-fit connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear bumper, on the driver's side.
Once installation is complete, the connectors will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket is included to keep the connectors secure.
It is recommended that you use a small amount of grease on all electrical connections - the plug on your automobile and the 7-pole and 4-pole connectors - to help prevent corrosion.
55774 Curt T-Connector - OE Multi-Socket Upgrade
Installation Details
California residents: click here
Customer Satisfaction Score:
93% were satisfied with this product
7% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors - C55774
Average Customer Rating: 4.7 out of 5 stars (610 Customer Reviews)
Quickly and easily install a 7-way and a 4-way trailer connector on your vehicle with this custom harness. Connector plugs directly into OEM tow package wiring harness - no cutting, splicing or tapping required.by: Peter 05/06/2024
The Curt T-Connector vehicle wiring harness fit as recommended by the etrailer.com customer service representative. I wanted to be sure the electrical connector package would fit my Draw-Tite hitch, and it did. The instructions were straightforward, although there were no screws or nuts to attach the metal bracket to the hitch. I had to supply those. I believe they should have been part of the kit. The installation video on the etrailer.com site was very helpful.
by: Charles 05/14/2024
Chevrolet TrailBlazer
This connector worked perfectly on my '06 Chevy Trailblazer. It was very easy to swap it out with my original connector, and the addition of the 4-pole plug makes it easy to eliminate the 7 to 4 pin adapter.
by: Clukero04/04/2024
2007 Chevrolet Silverado Classic
Excellent fit, oversized spare tire still fit underneath (285/70r17).
by: Tim R01/01/2024
2010 Chevrolet Silverado
Very easy, plugged right into the uscar connector, drilled 2 holes for the bracket, done
by: Andrew W. 10/26/2018
2003 GMC Yukon XL
I am having a problem with the install of the three Curt trailer components I purchased. I intentionally bought all of the same brand assuming that they would work together. The problem is that the Curt wiring harness (part# C55774) is too long and rigid. When the 7-pin connector is installed in the bracket that comes with it, it measure 5 inches until the black wire protective sleeve bends (to go under the hitch receiver frame).
The no-drill bracket (part# C57202) is supposed to attach the harness bracket to the hitch. But it is only 6.5" long, and the hitch tube is 3" wide. So with the bracket attached to the hitch, there is only 3.5" of space left to mount the harness bracket so that the screw holes line up.
I am disappointed that this is the case, especially as I called etrailer to check that the parts I was ordering would work together.
It looks like I will have to discard C57202 and drill two holes into the bottom of the hitch and mount the harness bracket directly. This is what I wanted to avoid - having to drill holes.
by: Mike04/11/2018
2015 Jeep Grand Cherokee
Super easy, very nice! Great engineering, couldn’t have been any easier! The girls at etrailer are super friendly and very helpful! Great prices and quick shipping, too!!
Mike
4/13/2019
Great. No problems.
by: David02/25/2024
2003 Mercury Mountaineer
This was supposed to be a plug in installation for my 2003 Mercury Mountaineer. No it wasn't. Completely different connector, and the wiring was 2 feet too short. Was able to use it after a bit of clipping and splicing.
by: Greg 04/20/2023
2006 Chevrolet Silverado
Very good, fit perfectly
Greg
4/21/2024
It has been working great, holding up well,the same as the day I purchased it. Great product
Bud M.
5/15/2024
@Greg
Great to hear. Thank you for the update.
Greg
5/15/2024
It has been great works exactly as it should
by: Martin04/22/2024
Product I ordered had an inaccurate description. Contacted customer service to return they would not send return shipping label so since the return shipping would have costed more than the part I threw it in the trash and ordered the part needed from another supplier. Needless to say I will not be ordering anything again.
by: Jim 05/04/2024
2017 GMC Acadia Limited
Working well. Have used the four prong plug only but am glad to have the 7 way available if needed.
by: Dylan04/10/2021
Perfect fit. My truck was not equipped with a tow package so I was a little worried it wouldn’t fit. The wiring and plug were already there with a cap on it to seal it from dirt/water. Took the cap off and this harness snapped right in place. Also installed an etrailer hitch and new bumper. Very happy with the products and the installer tools and information provided by etrailer.com.
by: Todd02/26/2024
2017 Ford Explorer
Always accurate parts and information
by: Danny07/31/2020
Harness was easy to install. The truck came prewired. It just needed the adapter. We dremeled our the back of the bumper (2019 Titan’s have the cut our outlined on the back side already). We had to dremel 2 side prices off the harness, but it slide right now. Then we drilled through the plastics bumper cover and the metal on the bumper and bolted the bracket to the bumper.
The 4 point is just fished between the license plate and the bumper. It was easy and it now looks factory. Very happy with how it came out! Install was a cinch!
by: Randy 05/15/2024
great product oem quality
by: Robert 04/10/2024
Perfect fit, works well
by: John08/24/2020
2018 Nissan Titan
I have a 2018 Nissan Titan, and while the connector was a perfect fit for connectivity to the factory connector. The Curt T-Connector wiring harness was about 6 inches short from connecting to the factory harness when mounted on the trailer hitch bracket. So, I was forced to mount it on the opposite side by drilling holes in bumper.
by: Matthew11/30/2017
If you have multiple trailers that either use a 4-way flat or 7-pin round connector and get tried of having to use an adapter go with this setup. I've had one on my other truck for a couple years and no problems with 'em thus far. You can technically use the old existing mount on the receiver hitch itself but the 4-way will dangle unless you ziptie it up.
by: Kent R.06/23/2017
2002 Ford Excursion
My 2002 Ford Excursion 7.3L diesel had the original factory hitch and wiring harness. The quality and heft of the Curt T-Connector is impressive. I bet I get years of use without problems.
by: Brett C04/15/2024
2024 Ford Bronco
Great product and very helpful staff! Thank you!!
by: Caro H06/01/2021
Great product. Installed on my 2018 Jeep GC. Because of dual 4 pin and 7 pin connector I don’t need an adaptor when swapping out trailers/camper. Clean look to it as well.
by: Michael 05/03/2023
2023 Honda Passport
Bought this because of the split 4 pin and 7 pin connectors. I’ve had so many 7 pin to 4 pin adaptors and would forget that I let my son or son in-law use it and had to buy another one when I needed it. This will stop me from the need to buy another adaptor, good for me not good for my son and son in-law when they come over to borrow the trailer. LOL, who am I kidding I’ll still go with them to the store and buy another one.
by: David 02/21/2024
2007 Ford F-150
Great product & customer service
by: Vernon 07/17/2023
Great fitment. Had a little difficulty getting to the right version of this but the amazing customer service at ETrailer helped me get to the correct one. Thank y’all! I love any business that’s not named after a rain forrest!
by: Rhonda04/17/2023
The actual trailer hitch was fine but the wiring kit was not the right kind. When I called to get a return authorization I was told that more than one half the cost of wiring kit will be deducted from my return for postage. I have never had to pay for returns to any company before. I will not be recommending your company
by: Greg01/11/2021
2017 Nissan Titan XD
There was no place on the new hitch to bolt the end to, which was a disappointment. For now I sip tied the end to the hitch in an area where it does not move.
25
610
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Recommended Trailer Hitch Receiver and 7-way Connector For 2013 Ford F-150 W/O Trailer ConnectorIt is pretty uncommon that a 2013 Ford F-150 does not have any factory trailer connector. Most often there is a 4-way connector installed, which you can see if your truck had one but is missing by looking on the driver side on top of the spare tire for a connector shown in the included picture. If one is present then you can use the Replacement OEM Wiring Harness for Ford F-150 # C56110 to add a 4-way connector. If no connector is present you will need to hardwire a 4-way connector using...
view full answer...
- Kuat Base NV 2.0 Bike Rack Needs Tail Lights Since you have the tow package with the trailer adapter you can attach lights to your bike rack If you use a 7-pin to 4-pin adapter, like the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors, part # C55774, you can attach a trailer light system to your rack. A lightbar system or two trailer lights will work, but if you attach them with screws or bolts you will void the warranty of your Kuat NV 2.0. If you go with a traditional light system...
view full answer... - 7-Way/4-Way Trailer Wiring Connector for 2011 Honda PilotI have a way to install a 4-way and 7-way on your 2011 Honda Pilot but you'll need to first start with the 7-way kit part # 118253 which you mentioned. This gives you a standard 7-way wiring but then you'd need to replace the 7-way socket with a Hopkins part # 30955 and you have the combined 4-way and 7-way you are looking for.
view full answer... - Replacement 7-way for 2018 Toyota Tundra with Factory WiringCurt offers a Replacement 7-Way connector # C55774 that will plug in to the round U.S. Car connector included in your factory tow wiring. This kit includes a 7-way socket and mounting bracket and it also includes a 4-pole connector as well. The part you referenced, Pollak 7-way # PK11893, is a socket only without harness (and without the 4-pole connection feature) that also uses the same U.S. Car connector shown in the included photo.
view full answer...
- Pigtail Length Of Curt T-Connector Vehicle Wiring Harness for Factory Tow PackageI went to the warehouse to measure and the 4-pole pigtail part # C55774 measures about 18 inches from the back of the 7-way plug to the end of the 4-way connector adapter piece so you shouldn't have any issues plugging in your 4-way. The wiring of the 4-pole connector that sticks out of the wire loom is about 6-1/2 inches. The overall length of the wire loomed wiring from the back of the 7-way plug to the end of the connector that plugs into the vehicle's factory port is 15-3/4 inches.
view full answer... - Can 7-Way and 4-Way Connectors be Plugged in at the Same Time on Tow VehicleIf your 4-Way will only be pulling power for a few turn signals then you should be okay plugging in both a 7-Way and a 4-Way in a connector like the Curt # C55774. You just need to be sure that you aren't drawing too much power on your lighting circuits as that can cause blown fuses or your lights to not work properly.
view full answer... - Recommended Towing Setup for a 2017 Jeep Grand Cherokee Without Towing PackageThe best towing setup for your 2017 Jeep Grand Cherokee is the Draw-Tite Trailer Hitch # 75699, the Curt T-Connector # C55774, and the Redarc Tow-Pro Elite # RED44FR. The reason I the Draw-Tite # 75699 is the best is because it features a hidden crosstube design for a clean look as well as a built-in bracket for mounting your wiring connector. If you happen to have the diesel model then you would need to go with Draw-Tite # 75713 instead. This doesn't have a hidden crosstube but it does...
view full answer...
- Adding a 6- and 4-Way or 7- and 4-Way Trailer Connector to a 2004 Ford F-150 Crew Cab 4x4The instructions for Curt 6-Way Round and 4-Flat Connectors # C55664 is listed only for certain GM vehicles and some imports (see instructions link for the list) but not for a 2004 Ford F-150. However, it should still work because it has the same connector to plug into the factory harness as # C55774 which is a 7- and 4-Way that is listed as a fit for a 2004 Ford F-150 that came with a factory 7-Way. If your truck came with a 4-Way then you would not be able to use either connector but...
view full answer... - Recommended Hitch and Wiring For 2015 Jeep Grand Cherokee LimitedI took a look at the installation instructions for the Curt Trailer Hitch Receiver - Multi Fit - Class III - 2" part # C13900 and although it may fit the 2015 Jeep Grand Cherokee it will take some drilling to get it to fit. The hitch adjusts to fit the frame but if the holes don't line up, the installation will require drilling into the frame. For that reason, I recommend to use Curt Class III Round Tube Receiver Hitch part # C13182 which is a fit for all the variations of the 2015 Grand...
view full answer... - Recommended Trailer Hitch for 2020 Ram 1500 Towing Winnebago Micro MinnieYou can use the Curt # C13419 on your 2020 Ram 1500 and it will handle the weight of your 3800-lbs Winnebago Micro Minnie trailer, however if you're ever planning on towing anything larger there is a better solution. I recommend using the Curt item # C15005 since you're likely going to be pretty close to the tongue weight capacity of the # C13419 and even the slightest upgrade in trailers at some point in the future could render it useless for towing. The Curt item # C15005 has a robust...
view full answer... - What is Vertical Height from Truck Frame to Hitch Tube on Draw Tite Hitch # 41947The Draw Tite hitch part # 41947 that you referenced actually is height adjustable. From the mounting surface (truck frame) down to the hitch opening can be 6-5/8, 8-1/4 or 10-1/4 inches.
view full answer... - Can 2004 Chevy Trailblazer Tow 3700 lb GVWR Travel TrailerThe max towing capacity of your 2004 Trailblazer will depend on whether it's a 2WD or 4WD and upon the rear axle gear ratio. According to the owner's manual, the capacity ranges from 4800 lbs for a 4WD EXT with the 6cyl engine with the 3.42 rear end up to 6800 lbs for the 2WD EXT with the 3.73 rear axle. Since the 3700 lb GVWR is well below the minimum 4800 lb towing capacity of the Trailblazer, theoretically you could tow the 2017 Jayco 17RB Hummingbird you speak of, assuming the vehicle...
view full answer... - Parts Needed to Tow a Trailer with a 2017 Ford Transit T150 VanFor your 2017 Ford Transit T150 I suggest the Draw-Tite # 75912. This is a 2 inch, Class III trailer hitch receiver confirmed to fit your van. All of the hardware is included and no drilling is required for installation. If your Transit does not have the factory tow package you can use # C56327 for a 4-way trailer connector and you can add the # ETBC7 kit if you need a 7-way. Use # C55774 for both a 4-way and 7-way in one part if the Transit has the tow package. If you don't already...
view full answer... - Trailer Wiring Harness Recommendation for 2020 Jeep Grand Cherokee with Factory Tow PackageFor your 2020 Jeep Grand Cherokee with the factory tow package the trailer wiring harness I recommend is the # C55774 as it comes with a 7-way and a 4-way so you'd be able to tow basically any trailer you'd encounter since these are the two most common types. I attached an install video for this on a similar 2018 Grand Cherokee for you to check out as well.
view full answer... - Replacement Combination 4-Pole/7-Way Vehicle Trailer Socket for 2005 Ford F-150We have a replacement combination 4-pole/7-way vehicle socket for your F-150, part # HM40975 from Hopkins. This uses the standard round U.S. Car type connector on the rear to connect to the vehicle and it provides both 4-pole and 7-way types of trailer connector.
view full answer... - 7-Way Wiring Harness for 16-Foot TrailerWe can help you with a replacement 7-way trailer harness for your 16-foot trailer. All such items are shown on the linked page. These include plugs-only, such as # PK12706, which uses your trailer's existing wiring; pigtail plugs like # 54006-059 that are available in many lengths; and also complete units like # HS381-9000 which is a 7-way plug with cable and wiring junction box. If you are referring to a replacement 7-way socket for your 2006 Nissan Titan then you can use # C55774 from Curt.
view full answer... - Trailer Light Fuse Sizes for 2008 Ford F-250 I looked in the online owner's manual to try and get the sizes so you can to hardwire in trailer wiring like the 4-Pole Hardwire Kit with Circuit Tester # 18252 or simply add something like the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors # C55774 to your 2008 Ford F-250. The manual stated the following: - Trailer stop/turn relay: 25 amp mini-fuse (position 34) - Trailer park lamp relay : 30 amp cartridge fuse (position 42) - Trailer...
view full answer... - Towing Capacities, Trailer Hitch and Wiring for 2005 Ford F-150 SuperCab 4WD With 5.4L V8According to Ford, a 2005 Ford F-150 SuperCab with four-wheel drive and a 5.4L V8 will have a capacity between 7,300 lbs and 9,300 lbs depending on what wheelbase it has and what axle ratio it has. I recommend finding what yours is and looking in your owner's manual, which will have these capacities. Then for a trailer hitch you can add the Curt Trailer Hitch Receiver # C14357 for a heavy duty, Class IV hitch and if you need to add a wiring harness the Plug-N-Tow (R) Vehicle Wiring Harness...
view full answer... - Is Hopkins Endurance Multi-Tow Twist-Mount Correct Replacement for 2007 Nissan Titan ConnectorAs long as you have the US Car Connector on your 2007 Nissan Titan then the Hopkins Endurance Multi-Tow Twist-Mount 7-Way RV and 4-Way Flat Trailer Connector # HM40920 will fit and work perfectly! Some other poplar options are the Curt T-Connector # C55774 and the Hopkins # HM40975. Both of these install using the same connector as the part you mentioned. The only difference is that the Hopkins you referenced is typically if your pickup has a cutout in the bumper area (see attached photo)...
view full answer...
- Trailer Connector With Both 7-Way and 4-Way connection For Tailgate Light BarYes, I recommend the Curt T-connector 7-Way and 4-Pole Flat part # C55774 that plugs into the factory 7-way port on the back of your truck and gives you a 7-way plug and 4-way trailer connector to plug your light bar into.
view full answer... - Replacement Trailer Wiring Harness for 2003 Ford F-250Yes, we have exactly what you're looking for. Have a look at the Curt # C55774, which will give you a plug and play solution and provide you with a new 7 way connector. I've also linked the other options we have available in case you're looking to replace one that was in the truck bed or you'd like to add that.
view full answer... - Will the Curt Class V Trailer Hitch Fit a 2002 Chevrolet Silverado 1500Yes, the Curt Class V Trailer Hitch, # C15323, will fit a 2002 Chevy Silverado 1500 LS with the factory bumper. I attached an installation video we made on a 2003 Silverado 1500 for you to check out. I'm sure you are aware of this already, but I'm sort of obligated to mention to check your truck's towing capacity. Even though this trailer hitch can tow up to 16,000 lbs, your truck is only capable of towing between 4,600 lbs and 10,000 lbs depending on how it is equipped. You can verify...
view full answer... - Replacing 6-Way of 2014 Chevy Silverado for 7-wayFrom the factory your 2014 Chevy Silverado should have came with a factory 7-way and not a 6-way so most likely your 7-way was swapped out for a 6-way. To then swap a 7-way back in we have the # A10-7072VP listed as a fit or if you want the style of 7-way and 4-way like a lot of Silverados came with you'd want the part # HM40975. I attached an install video for this on a similar 2015 Silverado for you to check out as well.
view full answer... - Will the Curt 13322 Hitch Fit a 2007 Chevy Silverado 1500 LTZYes. The Curt # 13322 is a confirmed fit on your 2007 Chevy Silverado 1500 and will provide you with a Class III 2" hitch receiver for towing. If you also need a wiring harness for your truck I recommend using the Curt # C55774 since it will provide you with both a 4 way and 7 way connector that allows you to tow a variety of different trailers. This is an easy, plug and play installation to the existing US car connector at the rear of your Silverado. If you need a ball mount and hitch...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Joshua S
Video by:
Dustin K
Video by:
Michael B
Written by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Jacob T
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Updated by:
Noah M
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Heather A.
10/26/2018
The 7-way bracket that comes with the wiring harness part # C55774 is designed to be installed with the wiring harness bracket hanging below the no drill bracket part # C57202. Since you are worried about the loose wiring I would recommend using some wire loom such as part # 459075-1 to protect your wiring and zip tie any slack with zip ties part # DW05726-25. I know this is not the option you wanted but I feel it is better than drilling into the hitch.
Helpful Links
Accessories-and-Parts/Curt/C57202.html
Custom-Fit-Vehicle-Wiring/Curt/C55774.html
Tools/Deka/DW05726-25.html
Tools/Spectro/459075-1.html