Recommended Towing Setup for a 2017 Jeep Grand Cherokee Without Towing Package

Question

Question:

Looking to install a class III hitch. 7 way plug and brake controller on my vehicle. What would my best route be to get this done. thanks

asked by: Eric S

0

Expert Reply:

The best towing setup for your 2017 Jeep Grand Cherokee is the Draw-Tite Trailer Hitch # 75699, the Curt T-Connector # C55774, and the Redarc Tow-Pro Elite # RED44FR.

The reason I the Draw-Tite # 75699 is the best is because it features a hidden crosstube design for a clean look as well as a built-in bracket for mounting your wiring connector. If you happen to have the diesel model then you would need to go with Draw-Tite # 75713 instead. This doesn't have a hidden crosstube but it does feature the highest weight rating and a bracket for mounting your wiring as well.

There should be a round US Car Connector behind the driver's side of your rear bumper that allows you to use the Curt T-Connector # C55774 (see attached photo). This comes with a mounting bracket that attaches to the built-in bracket on the Draw-Tite hitch.

Since you don't have the tow package you may need to go to a Jeep dealer though to have this activated. There is a way to route wiring without having to get the tow package activated but then you would be splicing into your OEM wiring which is time consuming and would probably cost about the same (or maybe a little more) than just getting the tow package activated.

The brake controller I recommend using is the Redarc Tow-Pro Elite # 331-EBRH-ACCV2 because it gives you both types of braking options (proportional and time-delayed) so that you get the best braking control when towing. Another great feature of this controller is the variety of places it can be installed. Since the control box can be oriented in any direction you can mount it virtually anywhere and then run the wiring for the control knob to a convenient location (see attached picture on a 2014 Jeep Grand Cherokee). You would simply connect this to the plug behind the driver's side kick panel of your Grand Cherokee using the Adapter # TK93VR. You would need to cut off the black connector side of the adapter and splice it to the pigtail that comes with the Tow-Pro Elite. I have attached an installation video of this using a different brake controller.

To complete your towing setup you also need a ball mount kit like part # 989891 but you will want to reference the attached ball mount article to make sure that the 3/4" rise/2" drop is correct for your towing application.

I have attached some videos for you to check out as well as some helpful articles to assist you with the installation.

expert reply by: Jon G

0

click to enlarge

Answer 1

We have the parts available to equip your 2017 Jeep Grand Cherokee Laredo to tow a trailer but it isn't the same as having a factory tow pacakge on the vehicle. Vehicle manufacturers rate their vehicles for towing based on how they're…

view full answer...

Answer 2

You could use the AirBedz Truck Bed Air Mattress w Rechargeable Battery Pump - Camo - 5' to 5-1/2' Bed #341019 without the tail gate inflatable attached to fit in the bed of your 2020 Toyota Tacoma short bed truck. It's not a perfect…

view full answer...

Answer 3

Yes, you can upgrade your 13.5k BTU AC unit on your camper to a 15k unit like with the Advent Air RV AC Unit part #ACCAR150 like you mentioned.

view full answer...

Answer 4

When you install the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector #C55384, it may be necessary to see a local Jeep dealer to activate the tow package wiring circuit. Some vehicles have the active tow…

view full answer...

Answer 5

The etrailer.com Class III hitch you'd looked at, part #e98901 fits all models of the 2017 Jeep Grand Cherokee with the exception of SRT, SRT8 or Trackhawk vehicles. If you'd prefer something that's less visible, that would have the hitch…

view full answer...

Answer 6

The Pollak 7-Way part #HM40975-11933 is a fit for your 2017 Jeep Grand Cherokee and would plug into a square connector at the rear of the vehicle. Most likely it's the connector you found already based on what you described. You might test the…

view full answer...

Answer 7

A vehicle's towing capacity depends on the entire complement of factory equipment installed on it. The best place to confirm this is the owner's manual. I checked an online edition of the manual for the 2014 Jeep Grand Cherokee Limited with…

view full answer...

Answer 8

On your 2017 Jeep Grand Cherokee Sport Trail the connector needed to plug in a brake controller install harness is behind the black cover located to the left of the steering column just above the carpet. Check out the attached picture to see how…

view full answer...