T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring

• Trailer Wiring Kit Needed for 2006 Dodge Durango Without Factory Hitch or Wiring
  If your 2006 Dodge Durango didn't come with trailer wiring from the factory then you'll need the T-One Wiring Kit # 118390. This gives you 4-Way wiring for your basic trailer lighting functions. I've attached an installation video of this kit that you can check out. To complete a towing setup you also need a ball mount kit. I recommend checking out Ball Mount Kit # 989900 because it includes two ball mounts, one with a 3/4” rise/2” drop and the other with a 2-3/4” rise/4” drop, a 1-7/8”...
  view full answer...
• Recommendation for Wiring Harness and 7 Pole Adapter for Towing a Trailer with My 2004 Dodge Durango
  I can help you get your 2004 Dodge Durango ready to haul your trailers. Yes, the Curt # C57674 4 pole to 7 pole adapter mated to the Tow Ready # 118390 kit would be a good idea to convert your 4 pole harness to a 7 pole opening while still having use of the original 4 pole. What is neat about this adapter is the LED indicator lights on the side will display proper connections. I have linked a installation video of the custom fit wiring harnesses installed on your vehicle and a video...
  view full answer...
• Weight Distribution System and Brake Controller Recommendations for 2006 Dodge Durango
  The Reese # RP66074 Strait-Line Trunnion Weight Distribution System is designed for trailer tongue weights ranging from 600-1200 lbs, so weight rating-wise it'd be perfect. The Strait-Line system is our Go-To recommendation for long trailers that are susceptible to sway caused by crosswinds and turbulence caused by oncoming traffic. For a trunnion bar system, the shank provides up to 6-1/2 inches of rise and 1-1/4 inches of drop. The included shank works for many, but not all vehicles. To...
  view full answer...
• Which Hitch, Trailer Wiring and Ball Mount are Recommended for a 2008 Chrysler Aspen
  I think the best and easiest to install hitch would be part # 13296 from Curt. It has a 600 pound tongue weight and 6,000 pound gross towing weight capacity. The wiring kit for the Aspen is part # 118390. It will plug in between your vehicle wiring and the tail lights to grab all the right signals. You will neeed to run a single power wire up to the battery on the Aspen to provide an isolated power source. This allows more lights to be used on the trailer as well as preventing damage to...
  view full answer...
• Why Do Some Trailer Wiring Kits for 2005 Dodge Durango Require Running Battery Wire
  The Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # HM42245 does have the advantage of having a much easier install than other options since it does not require running the power wire up to the vehicle battery but the battery wire offers your vehicle protection from trailer wiring shorts from transferring to the vehicle wiring. This is because the power draws from the battery and not the vehicle taillights. So a short would not hurt anything. So your...
  view full answer...
• Recommendation of Compatible Hitches for the 2005 dodge Durango and Towing Accessories
  We have 3 hitches that are designed for use on the 2005 Dodge Durango. I will list them all below. Draw-Tite Trailer Hitch, item # 75292 Draw-Tite Trailer Hitch , item # 75162 Curt Class III Round Tube Trailer Hitch Receiver, item # 13297 Of the 3 trailer hitches offered I would select the Draw-Tite Class III Trailer Hitch Receiver, item # 75292, because it has the highest towing capacities and is easy to install(see video) on the 2005 Durango. Some item you may need to complete your...
  view full answer...
• Tow Ready Custom Wiring Harness Recommendation for a 2006 Dodge Durango
  The problem you are experiencing is because you have tail lights on your 2006 Dodge Durango and the brake lights are on a separate circuit from the turn signals. You will need a converter box so that you can convert that signal so that your trailer with combined tail lights can be used with your vehicle. What I recommend you get is a Tow Ready Custom Fit Vehicle Wiring Harness # 118390 for your Durango. This harness will plug in-line with your tail lights and has the necessary converter...
  view full answer...
• Recommended Trailer Hitch Receiver and Wiring Harness For a 2005 Dodge Durango
  I recommend installing the Curt Trailer Hitch Receiver # 13072 on your 2005 Dodge Durango. This will easily bolt to the impact structure behind your rear bumper. Since it uses this impact structure it will not hang down like the other Curt # 13297. I prefer Curt as they are made in the USA and have a lifetime warranty. The T-One Vehicle Wiring Harness # 118390 will give you a 4-way flat connector. This will allow you to connect to most small trailers and Auxiliary Lights # C53201. If...
  view full answer...
• Trailer Wiring Harness for a 2005 Dodge Durango SLT 4.7L without Factory Tow Package
  It does not sound like your 2005 Dodge Durango has a factory tow package if you cannot find the plugs for the harness. But to be sure you can always have a Dodge dealer run the VIN through their system to see how the vehicle is equipped. Without the factory tow package you would use wiring harness # 118390. I have included a link to the installation instructions for you to view and a video showing a typical installation. This harness does connect in line with the tail light wiring. You...
  view full answer...
• How to Determine with 2006 Dodge Durango has Factory Tow Package
  If you already have a 7-Way connector at the rear of your 2006 Dodge Durango then the T-One # 118381 is the correct part. If you don't have a 7-Way then you would need the T-One # 118390 which is for an '06 Durango that doesn't have the tow package. This kit tees in right behind your tail light housing and pulls power directly from your battery to help protect the OEM wiring on your Durango. An installation video and the written instructions for both kits have been linked for you to...
  view full answer...
• Replacement Trailer Wiring Harness Recommendation for 2008 Chrysler Aspen
  Sounds like you have a shorted out trailer taillight converter. Any time we see one of the pins of a connector show voltage all of the time that indicates that box has shorted out most likely due to a short on the trailers wiring. Curt harnesses like the one you have part # C55597 are notoriously easier to short out than other brands. So what I would recommend you do is find and fix any short on your trailer's wiring and then install a # 118390 in place of it and you'll be good to go.
  view full answer...
• 4-Way, 7-Way and Brake Controller Recommendation for a 2007 Dodge Durango
  For your 2007 Dodge Durango you would want the Tow Ready trailer wiring harness part # 118390 to start with a 4-way. Not all vehicles can handle the additional amperage draw of the trailer taillights on the vehicle taillight circuits. Those vehicles need setup that draws power from the battery. Some vehicles have higher rated circuits that can handle this, and others need to have the power drawn straight from the battery to protect the taillight circuits. For your vehicle you need to...
  view full answer...
• Trailer Wiring Harness for a 2007 Dodge Durango without Factory Tow Package
  Curt trailer wiring harness # C55381 will only fit your 2007 Dodge Durango if it came with the factory tow package. If you cannot find that factory connector anywhere then it is likely that your model does not have the factory tow package and you will need a different harness. For a model without the factory tow package I recommend Tow Ready wiring harness # 118390. I have included a link to a video showing how it installs as well as a link to the installation instructions for you.
  view full answer...
• Installation, Drilling and Trimming Required to Install a Trailer Hitch on a 2008 Chrysler Aspen
  What our installers do when installing hitches on the Aspen, like your 2008, is to first get the hitch in position and attach the u-bolts that go over the vehicle bumper structure. Then, they use the hitch as a template and drill through the bumper structure from the back of the vehicle. Then they drill out the other side. The bumper structure is hallow so you do not have to drill all the way through. It is easier to get the holes lined up correctly this way. Take a look at the instructions...
  view full answer...
• Parts Needed to Install a Tekonsha Voyager Trailer Brake Controller on a 2006 Dodge Durango
  In order to install the Voyager brake controller, # 39510, on a 2006 Dodge Durango, you will need a few parts depending on how the vehicle is equipped. If the Durango came with a factory installed 7-Way trailer connector, all you will need is the brake controller and wiring harness # 3020-P. This harness plugs into the brake controller on one end and into a a factory plug on the vehicle. The factory plug is located underneath the dash, to the left of the steering column, taped to another...
  view full answer...
• How long does It Take to Hardwire a Tekonsha P3 Electric Brake Controller On a 2008 Chrysler Aspen
  Installation time is going to vary by shop and the experience of their mechanics. If you are going to an RV dealer that has experienced mechanics that have done hard wire installations several times in the past, I would say that the install time for the P-3 brake controller, # 90195, the 4-Way wiring harness, # 118390, and the brake controller installation kit, # ETBC7, will require 3-1/2 to 4 hours of install time. Here at our facility we do video installations and the time required...
  view full answer...
• Brake Controller Install Kit and Hitch Recommendation for 2005 Dodge Durango
  For trailer wiring you would need to first start with the 4-way part # 118390 that will plug inline with the vehicle taillight connectors like you mentioned. To convert the 4-way to a 7-way will require the part # ETBC7 that comes with everything needed to make the conversion and install the brake controller. I attached an install video an instructions for you to check out as well. For a hitch the Curt part # 13072 would be a great option as well.
  view full answer...
• Recommended Trailer Hitch Receiver for 2005 Dodge Durango
  The Hidden Hitch brand has been discontinued because it was the same hitch as Draw-Tite with just a different sticker for years. Draw-Tite made both hitches as they bought out Hidden Hitch many years ago. For the same hitch as 87562, you will want the Draw-Tite Max-Frame Trailer Hitch Receiver # 75162. If you will be towing with this hitch, I also recommend the Etrailer.com ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a...
  view full answer...
• No Voltage on Running Light Circuit of 7-Way Trailer Connector on 2007 Dodge Durango
  It sounds like you've successfully eliminated the trailer wiring as being the cause of the problem. Since you've tested the trailer connector on the vehicle, and found everything but the running light circuit working correctly, I believe you have a blown fuse. According to the online copy of your owners manual, the fuse for the 'Trailer Tow Park Lamps' is in the Integrated Power Module box in the engine compartment next to the driver's side fender. There's two black boxes with removable...
  view full answer...
• Parts Needed to Install an Electric Trailer Brake Controller on a 2005 Dodge Durango
  Since your 2005 Dodge Durango does not have a factory 7-Way or brake controller plug under the dash, it will be a hardwire installation. For that, you will need a 4-Way trailer connector installed first, # 118390, unless you already have one. Then, you will need to install a 4 and 7-Way Installation Kit, # ETBC7. The ETBC7 comes with all of the wiring and circuit breakers needed to install a brake controller like the Tekonsha P3, # 90195. I have included a link to the FAQ article on the...
  view full answer...
• Weight Distribution, Transmission Cooler and Brake Controller for 2006 Dodge Durango
  As a first step, I recommend you determine the towing capacity of your Durango. I have done some research on that vehicle, and saw several references that state that the Durango, regardless of the engine it has, can only tow 2000 lbs unless it is equipped with the trailer towing group. Check with your owners manual or or your Dodge dealer for more information. You then need to determine the as-towed, fully loaded tongue weight of your trailer. I will provide an article that shows how to...
  view full answer...
  
• Parts Needed to Install Draw Tite Brake Controller # 5504 in a 2006 Dodge Durango WO Tow Package
  Since your 2006 Dodge Durango does not have the factory tow package you'd need the # 20127 with the Draw Tite part # 5504 as well as the 4-way kit part # 118390 and then a kit to convert it to a 7-way and wire up the controller you'd then need the # ETBC7 and you'd be set.
  view full answer...
• Trailer Wiring Harness For a 2005 Dodge Durango
  If you were required to install a factory bumper with a receiver hitch, it is very likely that there will not be a port for the Replacement Connector for Dodge OEM Style Plugs, item # 42145, to plug into. Normally this port is located on the driver side near the frame rail and bumper at the back of the vehicle. You may need to move the spare tire out of the way to find the connector. If that port is not present you will need a Tow Ready Custom Fit Vehicle Wiring for the 2005 Durango by...
  view full answer...
• Why is a Battery Connection Required for Trailer Wiring Harnesses on a 2009 Chrysler Aspen
  Powered trailer wiring harnesses like # 118390 have a direct connection to the battery for 2 reasons. First, it powers the trailer lights instead of drawing the power and the signals all through the vehicle tail light wiring. This helps protect the vehicle wiring. And second it offers additional circuit protection beyond what a non-powered converter can. Basically, you want as much isolation between the vehicle sensitive wiring and electronics and the trailer wiring. The last thing you...
  view full answer...

Do you have a question about this Custom Fit Vehicle Wiring?