Parts Needed to Install a Tekonsha Voyager Trailer Brake Controller on a 2006 Dodge Durango
Question:
what is needed for a voyager brake controller to be installed on a 2006 dodge durango
asked by: Tommy C
Expert Reply:
In order to install the Voyager brake controller, # 39510, on a 2006 Dodge Durango, you will need a few parts depending on how the vehicle is equipped. If the Durango came with a factory installed 7-Way trailer connector, all you will need is the brake controller and wiring harness # 3020-P.
This harness plugs into the brake controller on one end and into a a factory plug on the vehicle. The factory plug is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. I have included a link to a video that shows installation on a similar vehicle.
If the Durango did not come with a factory 7-Way trailer connector, you will first need to install a 4-Way, unless the vehicle already has one, using # 118390. I have included some instruction links for you. Next, you will install a 4 and 7 way installation kit # ETBC7. This will provide a 7-Way connector and the wiring for the brake controller.
I have included some links that explain the ETBC7 installation for you.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Dodge
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Tekonsha Voyager Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Manual Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- Indicator Lights
- Up to 90 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement Trailer Grease Seals for Allis 5013 29772
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Comparing the Curt Q20 and the Curt A20 5th Wheel Hitches.
- Q&A: Which Nev-R-Adjust Brake Assemblies for Load Trail 14K Dump Trailer
- Q&A: How To Add a Fuel Tank To a Truck with 5th Wheel Hitch In Bed
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Article: Guide to Choosing the Best Truck for 5th-Wheel Towing
- Q&A: Kit to Convert 2021 Vanleigh Pinecrest 335RLP to Electric Over Hydraulic Disc Brakes
- Article: Best Camper Jacks
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)