Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
Item # C55384
Retail:$45.95
Our Price: $33.63
You Save: 27%
Confirmed to Fit
2017 Chevrolet Silverado 2500
with factory 7-Way
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (627)
- Q & A (0)
- Photos
2017 Chevrolet Silverado 2500 - Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit
- 4 Flat
- Trailer Hitch Wiring
- CURT
- No Converter
Quickly and easily install a 4-way trailer connector on your Chevrolet Silverado 2500 with this custom harness. T-connector plugs directly into 7-way OEM tow package wiring harness - no cutting, splicing or tapping required.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Designed for use with a factory tow package that has a 7-way connector
- Retains 7-way connector functionality
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection points behind rear bumper
- Plug in T-connector
- Comes with dust cap for 4-way flat connector
- Limited 1-year warranty
Installation
This custom-fit T-connector plugs into your vehicle's factory tow package wiring harness, which is located behind the rear bumper. Simply plug the harness in-line with your existing 7-way wiring harness.
Once installation is complete, the 4-way connector will be stowed beneath your vehicle, near the trailer hitch. A mounting bracket (sold separately) is recommended to keep the connector secure.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
55384 CURT T-Connector - OE 4-Flat Upgrade
Installation Details
California residents: click here
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector - C55384
Average Customer Rating: 4.8 out of 5 stars (627 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom harness. T-connector plugs directly into 7-way OEM tow package wiring harness - no cutting, splicing or tapping required.by: Vincent 03/21/2023
Quick & easy trailer wiring harness replacement . took less than 15 minutes
by: Slpugh04/22/2024
2005 Chevrolet Silverado
Installation was very easy and only took about 15 minutes to hook up and secure wiring on truck.
by: Gerald03/23/2024
2005 Ram 2500
Top quality trailer hitch at a very reasonable price!
Chevy 2500 HD 2005 Duramax
by: Dan 11/15/2023
Yup. Still works after a year in operation. The only thing I am unhappy with is my vehicle thinks there is always a trailer connected and the backup sensors and side sensors are automatically disabled.
by: Donald 02/27/2024
This product was exactly what was portrayed on line. Wiring harness was very simple to install and works extremely well.
by: Jerry 05/14/2024
Works well easy plug and play
by: Mcrae11/18/2023
When I finally installed it about 3 months ago, the plug in connectors did not match what I had on my truck. I ended up just cutting them off and splicing them into the connector from my truck
by: Nathan 03/26/2024
2014 Chevrolet Silverado
Exactly as described. Fit perfectly into my 2014 Silverado bumper outlet.
by: Christopher 03/29/2024
2017 Jeep Grand Cherokee
Easy plug and play simple installation.
by: Tony B.12/15/2018
2018 Dodge Ram Pickup
I installed my Curt T-Connector today to my 2018 RAM 1500 Sport 4x4 Crew Cab. The mileage on the truck is at 10679km's. Although warned that the spare tire might require removal (via web site info from fellow RAM owners) that was not the case as there was enough room to remove the OEM connector (which is the short end of the assembly) from the factory housing. The actual disconnect and re-connect took only a couple minutes. I spent a about 15 or 20min's trying different wiring run routings for the aux. four connector plug wiring run. Some tie-wraps where installed to snug things up out of the way and I was done. I also dosed the connections with a shot of Krown 77 lube/rust inhibitor. I'm in the "Great White North" so salt use on roads is a given during the winter months. A quick test run of the lights and I was done. The build quality of the T-Connector is very good..equal to OEM or better I'd say.
by: Julie 05/20/2024
No issues thank you
by: Richard07/23/2023
2001 Chevrolet Silverado
Unfortunately, the product ordered did not fit my application and I will be returning!
Jenny N.
7/26/2023
I wanted to ask if your 2001 Chevy Silverado came with the tow package? Did you already have a factory seven way? If not, the part # C59236 would be the better fit.
by: Kirk 05/09/2024
Easy to install
by: Scott 11/02/2023
Fast delivery, and easy to find products. Second trailer hitch I bought from e-trailer. Great products
by: Dave 06/04/2024
Perfect fit
by: Jason m07/20/2019
Awesome!! I bought an OPT7 triple LED light bar for my Chevy Colorado and I didn’t want to splice wires or lose a whole lot of time trying to figure out how to wire it up so I googled and I came across a gentleman who used this product and Im very thankful for this connection and my light bar works smoothly and I have full use of the reverse camera AND I don’t have any wire mess outside or underneath my truck! Easy to install, my first time doing this and it literally took me about 2 minutes, if that! Definitely would recommend this product to anyone with a truck!! Thank you guys!!
by: Virgil06/06/2022
Was exactly as stated in description. Just unplugged old plug and plugged in new one. I had two plugs to replace and added an extra "T" plug for another 4 prong. It only took less than 15 minutes to install all 3. Customer service is wonderful. Everything I have bought from ETrailer is top notch and delivered on time or earlier.
Virgil
6/7/2023
Working GREAT. Easy to install
by: Andy l. 08/18/2017
2013 Jeep Grand Cherokee
Order class iii hitch and wiring harness for my 13 keep grand Cherokee . Came next day. Installed in 20 minutes. Great product. High quality and easy install
Product was shrink wrapped, taped and boxed ver professionally. Website also very easy to use
Would definitely recommend to anyone
by: Michael 05/09/2024
2003 GMC Yukon
Perfect fit!
by: Raymond03/15/2018
This is a great vehicle to trailer wiring harness just plug it in and you're ready to go and that's all they are to it plug and go and I recommend it.
by: Pat M08/28/2013
2013 Chevrolet Avalanche
Easy to install works great shipping and communications was fantastic. Now my USMC LED light hitch cover is on the truck without an adapter.
by: Martin m07/22/2017
Perfect fit. Took 20 minutes to install wire harness and hitch receiver.
by: Miseal12/07/2022
2019 Ford Ranger
Easy instructions, installation was a breeze. Very important to torque bolts down to spec. Also will need to have dealer “flash” vehicle to activate trailer lights. 5 stars
by: Caity12/05/2020
Easy to install and tucks away nicely next to the hitch. No hanging wires and really clean look
by: Anita 04/03/2024
2011 Ram 1500
Arrived on time and just what I need.
25
628
Show More Reviews
See what our Experts say about this CURT Custom Fit Vehicle Wiring
- Tail Light and License Plate Solution for Transporting Covered BikesThe best solution we have is to use the Thule License Plate Holder # TH35JV for the license plate part of your problem and then adding magnetic towing lights like the Wireless Hopkins # C6304 (you need 8 AA batteries # DU58QR) or Optronics # TL21RK so your tail lights are still visible. Since your Swagman XC2 Bike Rack # S64650 will be covered with the bag you'll need to get creative with the mounting straps for the Thule License Plate Holder but it's the best option for your application. To...
view full answer... - 4-Way Recommendation for a 2010 Dodge Ram with 7-Way to Power LED LightbarThe 7-way of your 2010 Dodge Ram will separate easily to allow you to install the Curt T-Connector part # C55384 easily. Also, the current 7-way and 4-way you have on your truck will still be fully functional with this adapter installed. This would be the perfect solution for what you are looking to accomplish.
view full answer... - Finding Brake Circuit for Wiring Third Brake Light to Truck Bed Camper ShellGetting a dedicated brake signal for your 2019 Toyota Tundra for a canopy is typically done by tapping into the the third brake light circuit on the cab of the truck or the brake light circuit that is at the taillights. There isn't a wire or circuit readily available for this on your truck but if you really don't want to tap into the vehicle wiring the other solution you have is the Roadmaster Universal Stop Light Switch Kit # RM-751000 which you'd install at the brake pedal and wire to...
view full answer... - Recommended 4-Way Trailer Connector for Truck Bed Light Strip Behind BumperFor your 2017 Ram 2500 you will use the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C55384 for your light strip like # RA960137. This will give you the 4 way connection behind the bumper and still give you the trailer connector at your bumper for trailer use.
view full answer... - Troubleshooting Wiring Harness for 2017 Nissan Titan with Trailer Lights Not WorkingIt sounds like the Curt # C55384 is working properly with other trailers just not one specific trailer. The good news is the harness isn't the issue when this is the case. The not so good news is you will need to check the trailer wiring. Normally when there is an issue with a vehicle wiring that works with some trailers and not others, the issue is in the ground of the trailer or a bad connection. I recommend cleaning your trailer connector pins with a little sand paper to ensure you...
view full answer... - Recommended Trailer Hitch And Wiring For A 2023 Ford Explorer For a 2023 Ford Explorer you would need the Curt T-Connector Vehicle Wiring Harness # C56093 if you did not have the factory trailer connector. If you did you would instead need the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # C55384. For the trailer hitch I recommend the Curt Trailer Hitch Receiver # CU78FR. I've attached some video below that will help walk you through the installation process of these products if you plan to do them yourself.
view full answer... - Recommended Trailer Wiring Harness for 2013 Ford Explorer The Curt T-Connector Vehicle Wiring Harness # C55384 referenced in your question is designed for your 2013 Ford Explorer only if it came equipped with the factory tow package. If your Explorer does not have the tow package then you may be able to simply cut the factory connector ends off the harness and simply hardwire the harness into the wiring on your vehicle, but I highly recommend going with the correct harness instead. If you don't have the factory tow package then the correct Curt...
view full answer... - Which Circuit on Trailer Connector Carries Reverse Lamp CircuitThe 4 pole trailer connector provided by the Curt # C55384 T-Connector has provisions for basic lighting functions, right turn/brake lamp circuit is the green wire, left turn/brake lamp circuit is the yellow wire, running lights is the brown wire and the white wire is for the ground connection. If your trailer has reverse lamps, and you'd like them to function, you'll need to use a 7-way trailer connector such as # PK11893 and connect the center pin to the vehicle's reverse lamp circuit....
view full answer... - What 4-Way Wiring Harness Fits My 2013 Ford Explorer? Thanks so much for ordering with us! For a light kit wiring harness for your 2013 Ford Explorer with the etrailer Hitch - 2" # e98867, you need the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer # C55384 (if you have a factory tow package) or the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118540 (if you do not have a factory tow package). With these harnesses, you will provide your trailer with brake light, turn signal, and running...
view full answer... - Installing Wiring for Truck Cap Stop Light on a 2014 Chevy SilveradoOn your 2014 Chevy Silverado, there are a couple of options to connect your Truck Cap stop light to your truck. The CHMSL (center high mount stop light) on your truck is one location where you can tap into the wires with Quick Splice Wire Connector # SWC501925-1 on the power and ground to run # 16-1-1 wires to your cap light. Another option is to tap into your fuses using the lid of the fuse box or your owners manual to determine the fuse location for the CHMSL or Stop Light. Another...
view full answer... - Recommended 4-Way Flat Connector that Retains the Function of Factory 7-Way To Power AccessorySince you already have the factory 7-way, you only need the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # C55384. This will install right behind your 7-way to give you the 4-way plug you need for your backup camera. This will retain the functionality of your 7-way as well.
view full answer...
- 4 Pole Trailer Connector for 2020 Ford ExplorerFor your 2020 Ford Explorer, you'll want to use # C55384 which would plug into the US Car connector under the rear of the vehicle. If the vehicle isn't equipped with factory tow package that includes the US Car connector, you'd need to use the Tekonsha T-One Vehicle Wiring Harness, part # 118599. You can see installation instructions by clicking the provided link.
view full answer... - Adding a Clean-Looking 4-Pole to the Factory 7-way on a 2012 Chevrolet SilveradoI called Curt to confirm, and the T-Connector, part # C55774 will not fit in the factory hole in your 2012 Chevrolet Silverado's bumper. If you're looking to replace the factory 7-way plug, then the Pollak Replacement 7-Pole, part # PK11893, will fit in the factory hole. I've linked to a video review of this socket for you to look at. If you're looking to add a 4-pole to your factory towing package and still keep a relatively clean, factory look, I recommend a different T-Connector from...
view full answer... - Recommended 7-Way Trailer Connector for 2014 Ford F150 STXUnder the rear of your truck, near the back bumper, you should find the factory trailer wiring harness. It will probably be located on the driver's side frame rail, just behind the rear tire. The harness will terminate in a round plug that would plug directly into the trailer connector I'd recommend, which is the Hopkins # HM40975. This connector provides both a 7-way and a 4-pole. The round plug you find under the vehicle will have a protective cap on the end of it to keep out road crud...
view full answer... - Recommended Plug N Play Brake Controller and Trailer Wiring for a 2023 Ford Explorer W/ Tow PackageAndrew, what it sounds like you're looking for is the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # C55384. This is going to plug directly into your OEM tow package wiring and provides a 4-way connector at the back of your Ford. It also looks like you're looking at the Redarc Tow-Pro Liberty Brake Controller # RED24FR, so if you're looking for a plug and play harness for that brake controller you can use the Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake...
view full answer... - Trailer Hitch Receiver and Other Parts Needed to Tow a Trailer with a 2009 GMC SierraIf your 2009 GMC Sierra is a 1500 then I recommend the Draw-Tite trailer hitch receiver, part # 75521. It has more capacity than most of the hitches without adding onto the price. I've linked a video of the install on a 2010 Sierra which will be the same for you. If your truck is not a 1500 then let me know so I can make the correct recommendation. Also, if you need trailer wiring I recommend part # C55384 for a 4-way connetor or part # 30955 for a 7-way. Whichever connects to your...
view full answer... - Adding 4-Way to Nissan Frontier with 7-Way to Power LightbarYou could use the Curt 4-way part # C55384 for what you are looking for. This will plug into the 7-way at the rear of your 2019 Nissan Frontier and give you a 4-way you could route to your tailgate lightbar.
view full answer... - Curt Hitch and Wiring Harness Installation in 2013 Jeep Grand CherokeeWe offer lots of helpful resources to assist installation of a hitch like the Curt # C13182 and many of our customers do handle the process themselves. Basic hand tools are required, along with a torque wrench like # ALL944001, to ensure the included fasteners are tightened to the correct torque values. I have linked the written instructions (which list the tools required), a video showing installation in a 2013 Jeep Grand Cherokee and also a helpful article with great tips for an easier...
view full answer... - Troubleshooting Trailer Wiring With 2002 GMC Sierra 1500HDThere are taillight converters available and it is possible I can find something to work for you though I would need to know the year of your GMC Sierra 1500 in order to find out. If you can get back to me with that information I can try and find a solution for you.
view full answer... - Trailer Wiring Adapter for 2019 Ford F-250 to Provide Lighting for Headache RackUsually headache racks that have taillight functions like what you mentioned use a standard 4-way trailer connector to power the lights so your best solution is the part # C55384 which plugs in line with the 7-way you have now and provides a 4-way and harness you can use for the headache rack and also leaves the 7-way totally functional. You'll want a 4-way extension too with part # HM47114.
view full answer... - Can Curt T-Connector C55384 Be Added To 2021 Chevy Silverado To Power Extra Tail Lights On Camper?I would be happy to help! Yes the Curt T-Connector # C55384 you were looking at for your new 2021 Chevrolet Silverado 1500 will plug in inline of your factory connector and allow you to plug in both your campers 7-way connector and the 4-way connector you are using to power the extra tail lights. The only thing you will need to be sure of is that the combination of both connectors does not overload the individual circuits of the factory wiring. Due to only adding one extra set of tail...
view full answer... - Recommended Hidden Trailer Hitch, Wiring, And Bike Rack For a 22021 Ford Explorer XLTGreat it sounds like you are already on the right track here. The Draw tite hidden hitch # DT66GR is a great choice for your 2021 Ford Explorer XLT. Once installed, only the 2" Receiver is visible under the bumper. Once you pull the pin and remove the receiver, you will not even know its there, save for a small square cut out of the underbody panel, which is really not visible to the naked eye. The 2" receiver will be perfect for a jet ski trailer and virtually any bike rack. For your...
view full answer... - Can a 2022 Dodge Durango Be Flat Towed Behind a RV?Yes, it can if you have the all wheel drive model. The rear wheel drive models will have to be put on a trailer. To flat tow your 2022 Dodge Durango you will need the following parts: Tow Bar and Safety Chains - Roadmaster Falcon 2 Tow Bar item # RM-520 and item # RM-643 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit - Removable Arms item # RM26VR Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit item # RM-15267 Supplemental Braking System - SMI Stay-IN-Play...
view full answer... - Does Curt 4-Way Adapter C55384 Fit 2022 Nissan FrontierHey Jerry, yes the Curt 4-way adapter part # C55384 that you referenced does fit your 2022 Nissan Frontier.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Test Fit:
Jared G
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Ryan G
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Expert Research:
Victoria B
Video by:
Andrew K
Video by:
Kathleen M
Video by:
Jonathan Y
Video by:
Michael B
Installed by:
Jeff D
Installed by:
David F
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Vincent C.
3/22/2024
1 year & still works great, very easy plug & play setup. I recommend putting a small amount of white lithium grease on those connecting, helps protest against rusting.